| Newsgroups |
gmane.linux.drivers.dvb |
| Message-ID |
<[email protected]> |
Hi,
There's a lot of mails can be found on internet about my problem but hardly any
gives answer for subj.
Year ago, this was ok, there where ~mrec dvb-kernel available. Now it is gone,
and my problem raised again - cannot find the way to get my kworld 380u to work
properly, even by changing idProduct=e359 for somehow working kworld355u in file
linux/drivers/media/video/em28xx/em28xx-cards.c:
==
{ USB_DEVICE(0xeb1a, 0xe359),
.driver_info = EM2870_BOARD_KWORLD_355U },
==
Can anyone lead me where to look or change next?
Specs:
Box: Slackware 13.0, Linux 2.6.29.6-smp.
Item: Kworld 380U DVB-T USB stick
Dmesg before compiling dvb kernel from linuxtv.org:
Nov 16 16:54:04 dtv kernel: usb 1-1: new high speed USB device using ehci_hcd
and address 4
Nov 16 16:54:04 dtv kernel: usb 1-1: New USB device found, idVendor=eb1a,
idProduct=e359
Nov 16 16:54:04 dtv kernel: usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
Nov 16 16:54:04 dtv kernel: usb 1-1: Product: USB 2870 Device
Nov 16 16:54:04 dtv kernel: usb 1-1: configuration #1 chosen from 1 choice
Modules made from http://linuxtv.org/hg/v4l-dvb/ do not create devices in
/dev/dvb/ probably because of qt1010 firmware?
--
blondais
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb