dvb_usb_dib0700 ( T14BR) not initializing on reboot

Paul <[email protected]>
Newsgroups gmane.linux.drivers.dvb
Message-ID <[email protected]>
I have a DVB-T USB device ( T14BR),
which seems to work fine when I plug in my Fedora 10 box but I if I 
reboot with device connected it regularity fails to initialise correctly
and to correct I have to remove unplug-device remove the module and 
reload module to fix up and only after system has been fully booted

eg
modprobe -r dvb-usb-dib0700
then
modprobe dvb-usb-dib0700  adapter_nr=2
and then plug device in.
I get the following msgs when it seems to fail and the second set when 
it works

kernel log (failed)

Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using 
ohci_hcd and address 2
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using 
ohci_hcd and address 3
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using 
ohci_hcd and address 4
Nov 22 13:51:50 mythbox kernel: usb 2-7: new full speed USB device using 
ohci_hcd and address 5
Nov 22 13:51:50 mythbox kernel: usb 2-8: new low speed USB device using 
ohci_hcd and address 6
Nov 22 13:51:50 mythbox kernel: usb 2-8: configuration #1 chosen from 1 
choice
Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device found, 
idVendor=413c, idProduct=3010
Nov 22 13:51:50 mythbox kernel: usb 2-8: New USB device strings: Mfr=0, 
Product=0, SerialNumber=0
Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver 
hiddev
Nov 22 13:51:50 mythbox kernel: input: HID 413c:3010 as 
/devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4
Nov 22 13:51:50 mythbox kernel: input,hidraw0: USB HID v1.00 Mouse [HID 
413c:3010] on usb-0000:00:02.0-8
Nov 22 13:51:50 mythbox kernel: usbcore: registered new interface driver 
usbhid
Nov 22 13:51:50 mythbox kernel: usbhid: v2.6:USB HID core driver


http://www.artectv.com/ehtm/products/t14.htm

kernel log (working)

Nov 29 09:58:20 mythbox kernel: usb 1-8: new high speed USB device using 
ehci_hcd and address 3
Nov 29 09:58:20 mythbox kernel: usb 1-8: configuration #1 chosen from 1 
choice
Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device found, 
idVendor=05d8, idProduct=810f
Nov 29 09:58:20 mythbox kernel: usb 1-8: New USB device strings: Mfr=1, 
Product=2, SerialNumber=3
Nov 29 09:58:20 mythbox kernel: usb 1-8: Product: ART7070
Nov 29 09:58:20 mythbox kernel: usb 1-8: Manufacturer: Ultima
Nov 29 09:58:20 mythbox kernel: usb 1-8: SerialNumber: 001
Nov 29 09:58:20 mythbox kernel: dib0700: loaded with support for 7 
different device-types
Nov 29 09:58:20 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in 
cold state, will try to load a firmware
Nov 29 09:58:20 mythbox kernel: firmware: requesting dvb-usb-dib0700-1.10.fw
Nov 29 09:58:20 mythbox kernel: dvb-usb: downloading firmware from file 
'dvb-usb-dib0700-1.10.fw'
Nov 29 09:58:22 mythbox kernel: dib0700: firmware started successfully.
Nov 29 09:58:23 mythbox kernel: dvb-usb: found a 'Artec T14BR DVB-T' in 
warm state.
Nov 29 09:58:23 mythbox kernel: dvb-usb: will pass the complete MPEG2 
transport stream to the software demuxer.
Nov 29 09:58:23 mythbox kernel: DVB: registering new adapter (Artec 
T14BR DVB-T)
Nov 29 09:58:23 mythbox kernel: DiB0070: successfully identified
Nov 29 09:58:23 mythbox kernel: input: IR-receiver inside an USB DVB 
receiver as /devices/pci0000:00/0000:00:02.1/usb1/1
-8/input/input7
Nov 29 09:58:23 mythbox kernel: dvb-usb: schedule remote query interval 
to 150 msecs.
Nov 29 09:58:23 mythbox kernel: dvb-usb: Artec T14BR DVB-T successfully 
initialized and connected.

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.