Writing udev rules for dual tuner devices
Andreas Besse <[email protected]>
| Newsgroups | gmane.linux.drivers.dvb |
|---|---|
| Message-ID | <[email protected]> |
Hello,
I use a Media-Pointer MP-S2 Dual DVB-S2 PCIe card with the latest drivers from the git-Repository
http://projects.vdr-developer.org/repositories/show/mediapointer-dvb-s2 .
I tried to write udev rules to define the adapter names of the tuner to avoid that the device names could change at boot. It seems not to be possible to write a udev rule for this dual DVB-S2 device, because there are no attributes to differentiate between tuner 0 and tuner 1. Attached is the output of udevinfo.
The following udev rule allows only to define the adapter name of a single tuner:
SUBSYSTEM=="dvb", ATTRS{vendor}=="0x18c3", ATTRS{device}=="0x0720",
KERNELS=="0000:01:00.0",
PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter0/%%s $${K#*.}'", SYMLINK+="%c"
How can this issue be solved in general? I think the driver should provide an attribute for each tuner, so that it is possible to write udev rules. How this has been solved for other Dual Tuner devices like Pinnacle PCTV Dual DVB-T Diversity, DViCO FusionHDTV DVB-T Dual Express?
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
udevinfo.txt
(text/plain, 3.6 KB)
Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/dvb/dvb0.frontend0':
KERNEL=="dvb0.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
ATTR{dev}=="212:2"
looking at parent device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/dvb':
KERNELS=="dvb"
SUBSYSTEMS==""
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0':
KERNELS=="0000:01:00.0"
SUBSYSTEMS=="pci"
DRIVERS=="ngene"
ATTRS{vendor}=="0x18c3"
ATTRS{device}=="0x0720"
ATTRS{subsystem_vendor}=="0x18c3"
ATTRS{subsystem_device}=="0xabc4"
ATTRS{class}=="0x040000"
ATTRS{irq}=="16"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v000018C3d00000720sv000018C3sd0000ABC4bc04sc00i00"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00/0000:00:01.0':
KERNELS=="0000:00:01.0"
SUBSYSTEMS=="pci"
DRIVERS=="pcieport-driver"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x2771"
ATTRS{subsystem_vendor}=="0x0000"
ATTRS{subsystem_device}=="0x0000"
ATTRS{class}=="0x060400"
ATTRS{irq}=="223"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v00008086d00002771sv00000000sd00000000bc06sc04i00"
ATTRS{enable}=="2"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}=="1"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/dvb/dvb1.frontend0':
KERNEL=="dvb1.frontend0"
SUBSYSTEM=="dvb"
DRIVER==""
ATTR{dev}=="212:5"
looking at parent device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/dvb':
KERNELS=="dvb"
SUBSYSTEMS==""
DRIVERS==""
looking at parent device '/devices/pci0000:00/0000:00:01.0/0000:01:00.0':
KERNELS=="0000:01:00.0"
SUBSYSTEMS=="pci"
DRIVERS=="ngene"
ATTRS{vendor}=="0x18c3"
ATTRS{device}=="0x0720"
ATTRS{subsystem_vendor}=="0x18c3"
ATTRS{subsystem_device}=="0xabc4"
ATTRS{class}=="0x040000"
ATTRS{irq}=="16"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v000018C3d00000720sv000018C3sd0000ABC4bc04sc00i00"
ATTRS{enable}=="1"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}==""
looking at parent device '/devices/pci0000:00/0000:00:01.0':
KERNELS=="0000:00:01.0"
SUBSYSTEMS=="pci"
DRIVERS=="pcieport-driver"
ATTRS{vendor}=="0x8086"
ATTRS{device}=="0x2771"
ATTRS{subsystem_vendor}=="0x0000"
ATTRS{subsystem_device}=="0x0000"
ATTRS{class}=="0x060400"
ATTRS{irq}=="223"
ATTRS{local_cpus}=="ffffffff,ffffffff,ffffffff,ffffffff"
ATTRS{modalias}=="pci:v00008086d00002771sv00000000sd00000000bc06sc04i00"
ATTRS{enable}=="2"
ATTRS{broken_parity_status}=="0"
ATTRS{msi_bus}=="1"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""