Re: Problem in USB DVB devices: dvb-usb: recv bulk message failed: -110

Perhaps it helps, if you disconnect and reconnect the device. I have the
same Problem every 2 months and that helps ...

Hartmut


Am 17.04.2010 19:56, schrieb Halu Wong:
> Hi all,
>
> I got a Mygica D689 which already have driver in v4l-dvb. 
>
> But i can only get it work in VM (VMware player) but not in a real
> machine.
>
> Both using the same distribution/kernel/v4l-dvb etc.
>
> - Fedora 11 (32 bits)
> - Standard installation with the default
> kernel: 2.6.29.4-167.fc11.i686.PAE
> - with development tools/libraries installed
>
> download the latest v4l-dvb
> #hg clone http://www.linuxtv.org/hg/v4l-dvb
> #cd v4l-dvb
> #make
> - remove all the things in
> "/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/media"
> # make install
>
> plug the Mygica D689,
> message in real machine:
> Apr 18 09:23:06 localhost kernel: usb 1-7: new high speed USB device
> using ehci_hcd and address 3
> Apr 18 09:23:06 localhost kernel: usb 1-7: New USB device found,
> idVendor=0572, idProduct=d811
> Apr 18 09:23:06 localhost kernel: usb 1-7: New USB device strings:
> Mfr=1, Product=2, SerialNumber=3
> Apr 18 09:23:06 localhost kernel: usb 1-7: Product: USB Stick
> Apr 18 09:23:06 localhost kernel: usb 1-7: Manufacturer: Geniatech
> Apr 18 09:23:06 localhost kernel: usb 1-7: SerialNumber: 080116
> Apr 18 09:23:06 localhost kernel: usb 1-7: configuration #1 chosen
> from 1 choice
> Apr 18 09:23:06 localhost kernel: dvb-usb: found a 'Mygica D689
> DMB-TH' in warm state.
> Apr 18 09:23:06 localhost kernel: dvb-usb: will pass the complete
> MPEG2 transport stream to the software demuxer.
> Apr 18 09:23:06 localhost kernel: DVB: registering new adapter (Mygica
> D689 DMB-TH)
> Apr 18 09:23:07 localhost kernel: DVB: registering adapter 0 frontend
> 0 (AltoBeam ATBM8830/8831 DMB-TH)...
> Apr 18 09:23:07 localhost kernel: input: IR-receiver inside an USB DVB
> receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/input/input6
> Apr 18 09:23:07 localhost kernel: dvb-usb: schedule remote query
> interval to 100 msecs.
> Apr 18 09:23:07 localhost kernel: dvb-usb: Mygica D689 DMB-TH
> successfully initialized and connected.
> Apr 18 09:23:07 localhost kernel: usbcore: registered new interface
> driver dvb_usb_cxusb
> Apr 18 09:23:09 localhost kernel: dvb-usb: recv bulk message failed: -110
>
> message in VM:
> Apr 18 09:51:51 f11vm kernel: usb 1-1: new high speed USB device using
> ehci_hcd and address 2
> Apr 18 09:51:51 f11vm kernel: usb 1-1: New USB device found,
> idVendor=0572, idProduct=d811
> Apr 18 09:51:51 f11vm kernel: usb 1-1: New USB device strings: Mfr=1,
> Product=2, SerialNumber=3
> Apr 18 09:51:51 f11vm kernel: usb 1-1: Product: USB Stick
> Apr 18 09:51:51 f11vm kernel: usb 1-1: Manufacturer: Geniatech
> Apr 18 09:51:51 f11vm kernel: usb 1-1: SerialNumber: 080116
> Apr 18 09:51:52 f11vm kernel: usb 1-1: configuration #1 chosen from 1
> choice
> Apr 18 09:51:52 f11vm kernel: dvb-usb: found a 'Mygica D689 DMB-TH' in
> warm state.
> Apr 18 09:51:52 f11vm kernel: dvb-usb: will pass the complete MPEG2
> transport stream to the software demuxer.
> Apr 18 09:51:52 f11vm kernel: DVB: registering new adapter (Mygica
> D689 DMB-TH)
> Apr 18 09:51:53 f11vm kernel: DVB: registering adapter 0 frontend 0
> (AltoBeam ATBM8830/8831 DMB-TH)...
> Apr 18 09:51:54 f11vm kernel: input: IR-receiver inside an USB DVB
> receiver as
> /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/input/input5
> Apr 18 09:51:54 f11vm kernel: dvb-usb: schedule remote query interval
> to 100 msecs.
> Apr 18 09:51:54 f11vm kernel: dvb-usb: Mygica D689 DMB-TH successfully
> initialized and connected.
> Apr 18 09:51:54 f11vm kernel: usbcore: registered new interface driver
> dvb_usb_cxusb
>
> i can do w_scan with 11 services in VM but not ZERO in real machine!!
>
> Did the following log message imply sth!?!?
> Apr 18 09:23:09 localhost kernel: dvb-usb: recv bulk message failed: -110
>
> I have tried to install in another real machine but also with the same
> result!
>
> Can anyone give me a hint on how to check/solve this issue!!
>
> Thanks,
> Halu Wong
>
>
>
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead [email protected]
> [email protected]
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb