WinTV 1400 broken with recent versions?

Hey,

is this driver going to be fixed anytime soon? It was working fine ago a
half year/year.

lspci:
06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI
Video and Audio Decoder (rev 02)

uname -a:
Linux lyra 2.6.37.1 #1 SMP PREEMPT Tue Feb 22 13:22:59 CET 2011 x86_64
x86_64 x86_64 GNU/Linux

dmesg:
xc2028 1-0064: i2c output error: rc = -6 (should be 64)
xc2028 1-0064: -6 returned from send
xc2028 1-0064: Error -22 while loading base firmware
xc2028 1-0064: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
xc2028 1-0064: i2c output error: rc = -6 (should be 64)
xc2028 1-0064: -6 returned from send
xc2028 1-0064: Error -22 while loading base firmware
xc2028 1-0064: Loading firmware for type=BASE F8MHZ (3), id
0000000000000000.
xc2028 1-0064: i2c output error: rc = -6 (should be 64)
xc2028 1-0064: -6 returned from send
xc2028 1-0064: Error -22 while loading base firmware

nothing works - if i do scan it finds nothing and those messages appear on
dmesg. if i try to watch with the channels.conf from my other pc i can play
nothing, all i get is those messages above.

Jean

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb