Re: WinTV 1400 broken with recent versions?

nothing?

anyone?

On Wed, 23 Feb 2011 17:02:22 +0100
<[email protected]> wrote:

> Hey,
> 
> is this driver going to be fixed anytime soon? It was working fine ago a
> half year/year.
> 
> lspci:
> 06:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI
> Video and Audio Decoder (rev 02)
> 
> uname -a:
> Linux lyra 2.6.37.1 #1 SMP PREEMPT Tue Feb 22 13:22:59 CET 2011 x86_64
> x86_64 x86_64 GNU/Linux
> 
> dmesg:
> xc2028 1-0064: i2c output error: rc = -6 (should be 64)
> xc2028 1-0064: -6 returned from send
> xc2028 1-0064: Error -22 while loading base firmware
> xc2028 1-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 1-0064: i2c output error: rc = -6 (should be 64)
> xc2028 1-0064: -6 returned from send
> xc2028 1-0064: Error -22 while loading base firmware
> xc2028 1-0064: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 1-0064: i2c output error: rc = -6 (should be 64)
> xc2028 1-0064: -6 returned from send
> xc2028 1-0064: Error -22 while loading base firmware
> 
> nothing works - if i do scan it finds nothing and those messages appear on
> dmesg. if i try to watch with the channels.conf from my other pc i can play
> nothing, all i get is those messages above.
> 
> MIME

-- 
Jean-Michel Bruenn <[email protected]>

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb