Re: [linux-dvb] TeVii S470 (cx23885 / ds3000) makes the machine unstable
Josu Lazkano <[email protected]> Thu, 5 May 2011 23:58:22 +0200
| Newsgroups | gmane.linux.drivers.video-input-infrastructure,gmane.linux.drivers.dvb |
|---|---|
| Message-ID | <[email protected]> |
2011/5/5 Andrew Junev <[email protected]>: > > Hello Josu, > > Thanks a lot for your response! > > What kernel version do you have? > Do =A0you =A0see =A0your =A0card's =A0MAC =A0address in the /var/log/= messages when > the =A0 =A0driver =A0 is =A0loading? =A0I'm not sure if it matters, b= ut I see my > old =A0TT S-1401 cards' MAC addresses in the logs, but I don't see th= e > MAC of S470 anywhere... Maybe it just a specific of the driver... > > > As Igor wrote earlier, I probably need to upgrade my kernel. Well, I'= m > not =A0 really =A0 looking =A0forward =A0to =A0 do =A0that, =A0since = it is likely to > break =A0other things =A0for me. But if that's the only way - I guess= I'll > have to give it a try. > > Thanks again! > > Hello again, sorry for my repeated posts. I have 2.6.32-5-686 kernel and I have this output on dmesg: [ 11.459771] cx23885 driver version 0.0.2 loaded [ 11.460894] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19 [ 11.460914] cx23885 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19 [ 11.461093] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=3D15,autodetected] [ 11.587592] cx23885_dvb_register() allocating 1 frontend(s) [ 11.587600] cx23885[0]: cx23885 based dvb card [ 11.718813] DS3000 chip version: 0.192 attached. [ 11.718823] DVB: registering new adapter (cx23885[0]) [ 11.718831] DVB: registering adapter 7 frontend 0 (Montage Technology DS3000/TS2020)... [ 11.719476] cx23885_dev_checkrevision() Hardware revision =3D 0xb0 [ 11.719490] cx23885[0]/0: found at 0000:05:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfea00000 [ 11.719502] cx23885 0000:05:00.0: setting latency timer to 64 I complete the wiki page on linuxtv wiki, but I am not any expert and english is not my best. Be careful with kernel upgrade, i had lots of problem with 2.6.38 kernel. Tell me how goes your progress. Kind regards. --=20 Josu Lazkano