Re: [eepro100-bug] two i82559 on board do not work
Donald Becker <[email protected]>
| Newsgroups | gmane.linux.drivers.eepro100.devel |
|---|---|
| Message-ID | <[email protected]> |
On Wed, 25 Sep 2002, Anton Yurchenko wrote: > I have a Tyan LE-T Dual CPU motherboard > (http://www.tyan.com/products/html/thunderlet.html), it is based on > ServerWorks III LE3 chipset, with two i82559 controllers. > I`m running RedHat 7.3, uname -a: ... > eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html > eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> > and others > eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:E0:81:21:03:DC, IRQ 20. ... > eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2), 00:E0:81:21:03:DD, IRQ 21. > Board assembly 567812-052, Physical connectors present: RJ45 > Primary interface chip i82555 PHY #1. > Self test failed, status ffffffff: > Failure to initialize the i82557. > Verify that the card is a bus-master capable slot. OK, you have a failure of some sort. You can read the configuration EEPROM, but the chip can't operate on the bus. It appears that the card isn't enabled as a bus master, or the modified driver you are using isn't initializing the chip correctly. > I tryed fiddling with BIOS but no luck. PnP OS option in BIOS is > disabled, BIOS shows one controller on IRQ 10, and the other on IRQ > 11. It's not an IRQ problem. Try my driver release -- it might provide a better error message, or just fix the problem. -- Donald Becker [email protected] Scyld Computing Corporation http://www.scyld.com 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters Annapolis MD 21403 410-990-9993