Re: wait_for_cmd_done timeout, report on installing Intel e100 driver

Well I am not moving the 30 sites that are on the server I was having
problems with to another.  I can not get it stable.. I went from Last Friday
to this morning (longest in a long time)  I stripped the box to 1 NIC,
disabled the onboard NIC, I was still getting Command 80 errors (a few a day
but they always recovered) This morning it was a Command 0070 and the card
was hosed.

I was even running RH 7.1 with the noapic line and still did not help. I
feel this could be a hardware issue with the 2450's as I had one guy reply
stating he had the same problem and since getting Dell to swap the
motherboard he has not seen the problem.


----- Original Message -----
From: "John Madden" <[email protected]>
To: <[email protected]>
Cc: <[email protected]>; <[email protected]>;
<[email protected]>
Sent: Friday, January 24, 2003 7:22 AM
Subject: Re: [eepro100] wait_for_cmd_done timeout, report on installing
Intel e100 driver


> > As suggested by ASPLinux support team I successfully installed an Intel
> > e100 driver, and for now it works fine.
>
> Please keep us updated - I've heard that the e100 driver doesn't fix the
> error in all situations.  Further, I've heard that even switching to
> non-intel cards using different drivers (!) doesn't fix the issue.
>
> I went out on a limb and just patched my bios.  Eh... What's left?
>
> John
>
>
>
>
>
> --
> John Madden
> UNIX Systems Engineer
> Ivy Tech State College
> [email protected]
>
>
>
> _______________________________________________
> eepro100 mailing list
> [email protected]
> http://www.scyld.com/mailman/listinfo/eepro100