Problem with Intel eepro100 , digital DS21143 cards

Hello, 
I am not developing device drivers but I thought this would be the best group to answer my question. I have a problem with Intel
ee pro 100 and Digital DS 21143 Tulip eth cards
communication. 

I am running linux-2.4.19 on 2 linux clusters(of 5
nodes each)- as shown in the topology file attached to
this mail in MS POWERPOINT format- compiled from the
source distribution from kernel.org.

The kernels have Andrew Mortons Low latency patch and
in /linux/include/asm-i386/param.h - HZ has been
modified to 400. there has been no other change made
to the kernels.

The computers of cluster 1 all have 4 Intel EEPRO-100
ethernet cards
The computers of cluster 2 all have 4 Digital DS21143
Tulip ethernet cards. (pls see topology file)

The computers within each cluster are communicating
fine amongst themselves. Recently there was a need to
interconnect both these clusters and after this, there
is no communication on the links where a node from
cluster 1 is connected to cluster 2.

My e-mail will provide you with all details of one
such interconnection - node1 of cluster 1 and node6 of
cluster 2 which are directly connected by cat5
ethernet cable but are unable to ping each other, and
there is no LED glowing on the ethernet cards
pertaining to the link between these 2 nodes. the
other ethernet cards which are connected to computers
of the same cluster work just fine and LED's are
glowing.

I found your diagnostic programs on the web and I ran
them on the 2 nodes. the only problem which I can see
from the outputs is that all eth cards of node6(tulip
cards) which connect to computers within cluster 2,
have FULL DUPLEX link status but the eth card which
connects to node1(of cluster 1 having intel ee pro 100
card) has HALF DUPLEX link status. But I guess if you
see the output, you can tell exactly whats happening
and how to correct this.

I have also attached the outputs of ifconfig on node1
and node6.

I have also attached the outputs of dmesg of the 2
nodes at the end of this mail.

If possible, please let me know what I need to do to
make the computers of cluster 1 communicate with
computers of cluster 2. Your time and consideration
are appreciated.

Regards
SL.
----------------------------------------------
THE OUTPUT OF INTEL-EE-PRO100-DIAG.C ON NODE1
eepro100-diag.c:v2.12 4/15/2003 Donald Becker
([email protected])
http://www.scyld.com/diag/index.html
Index #1: Found a Intel i82557/8/9 EtherExpressPro100
adapter at 0xdf00.
A potential i82557 chip has been found, but it appears
to be active.
Either shutdown the network, or use the '-f' flag.
Index #2: Found a Intel i82557/8/9 EtherExpressPro100
adapter at 0xde80.
A potential i82557 chip has been found, but it appears
to be active.
Either shutdown the network, or use the '-f' flag.
Index #3: Found a Intel i82557/8/9 EtherExpressPro100
adapter at 0xdd80.
A potential i82557 chip has been found, but it appears
to be active.
Either shutdown the network, or use the '-f' flag.
Index #4: Found a Intel i82557/8/9 EtherExpressPro100
adapter at 0xdd00.
A potential i82557 chip has been found, but it appears
to be active.
Either shutdown the network, or use the '-f' flag.

---------------------------------------------------
THE OUTPUT OF THE TULIP-DIAG.C ON NODE6
tulip-diag.c:v2.17 5/6/2003 Donald Becker
([email protected])
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DS21143 Tulip adapter at
0xa000.
Port selection is MII, full-duplex.
Transmit started, Receive started.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  The NWay status register is 000000c6.
EEPROM 64 words, 6 address bits.
PCI Subsystem IDs, vendor 13d8, device 0430.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:60:F5:07:04:0C.
EEPROM transceiver/media description table.
Leaf node at offset 30, default media type 0800
(Autosense).
1 transceiver description blocks:
  21140 Non-MII transceiver for media 17 (MII
100baseFx-FDX).
   CSR12 control port setting 0x03, command 0x02 00.
   Media detection by looking for a 1 on bit 0 of the
CSR12 control port.
  Internal autonegotiation state is 'Autonegotiation
disabled'.
Index #2: Found a Digital DS21143 Tulip adapter at
0xa400.
Port selection is MII, full-duplex.
Transmit started, Receive started.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  The NWay status register is 000000c6.
EEPROM 64 words, 6 address bits.
PCI Subsystem IDs, vendor 13d8, device 0430.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:60:F5:07:04:0D.
EEPROM transceiver/media description table.
Leaf node at offset 30, default media type 0800
(Autosense).
1 transceiver description blocks:
  21140 Non-MII transceiver for media 17 (MII
100baseFx-FDX).
   CSR12 control port setting 0x03, command 0x02 00.
   Media detection by looking for a 1 on bit 0 of the
CSR12 control port.
  Internal autonegotiation state is 'Autonegotiation
disabled'.
Index #3: Found a Digital DS21143 Tulip adapter at
0xa800.
Port selection is MII, half-duplex.
Transmit started, Receive started.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  The NWay status register is 000000c6.
EEPROM 64 words, 6 address bits.
PCI Subsystem IDs, vendor 13d8, device 0430.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:60:F5:07:04:0E.
EEPROM transceiver/media description table.
Leaf node at offset 30, default media type 0800
(Autosense).
1 transceiver description blocks:
  21140 Non-MII transceiver for media 17 (MII
100baseFx-FDX).
   CSR12 control port setting 0x03, command 0x02 00.
   Media detection by looking for a 1 on bit 0 of the
CSR12 control port.
  Internal autonegotiation state is 'Autonegotiation
disabled'.
Index #4: Found a Digital DS21143 Tulip adapter at
0xac00.
Port selection is MII, full-duplex.
Transmit started, Receive started.
  The Rx process state is 'Waiting for packets'.
  The Tx process state is 'Idle'.
  The transmit threshold is 128.
  The NWay status register is 000000c6.
EEPROM 64 words, 6 address bits.
PCI Subsystem IDs, vendor 13d8, device 0430.
CardBus Information Structure at offset 00000000.
Ethernet MAC Station Address 00:60:F5:07:04:0F.
EEPROM transceiver/media description table.
Leaf node at offset 30, default media type 0800
(Autosense).
1 transceiver description blocks:
  21140 Non-MII transceiver for media 17 (MII
100baseFx-FDX).
   CSR12 control port setting 0x03, command 0x02 00.
   Media detection by looking for a 1 on bit 0 of the
CSR12 control port.
  Internal autonegotiation state is 'Autonegotiation
disabled'.

-----------------------------------------------------
THE OUTPUT OF DMESG OF NODE1:

Linux version 2.4.19 (root@node1) (gcc version 2.96
20000731 (Red Hat Linux 7.3 2.96-110)) #5 Sun Dec 1
19:34:52 CST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 0000000007ec0000
(usable)
BIOS-e820: 0000000007ec0000 - 0000000007ef8000 (ACPI
data)
BIOS-e820: 0000000007ef8000 - 0000000007f00000 (ACPI
NVS)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000
(reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000
(reserved)
126MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 32448
zone(0): 4096 pages.
zone(1): 28352 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda1
Initializing CPU#0
Detected 930.385 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1848.12 BogoMIPS
Memory: 125960k/129792k available (1252k kernel code,
3444k reserved, 496k data, 80k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5,
131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536
bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 32768 (order: 5, 131072
bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000
00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000
00000000 00000000
CPU:             Common caps: 0383f9ff 00000000
00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last
bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996
[email protected]).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings:
hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings:
hdc:DMA, hdd:pio
hda: FUJITSU MPG3204AT E, ATA DISK drive
hdc: CDU5211, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40031712 sectors (20496 MB) w/512KiB Cache,
CHS=2491/255/63, UDMA(100)
hdc: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by
Andrey V. Savochkin <[email protected]> and others
PCI: Found IRQ 10 for device 01:0c.0
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 01:07.0
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#4),
00:02:B3:87:83:B4, IRQ 10.
  Board assembly 751767-004, Physical connectors
present: RJ45
  Primary interface chip i82555 PHY #1.
    Secondary interface chip i82555.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x3258698e).
PCI: Found IRQ 9 for device 01:0b.0
PCI: Sharing IRQ 9 with 00:1f.4
eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3),
00:02:B3:87:80:06, IRQ 9.
  Board assembly 751767-004, Physical connectors
present: RJ45
  Primary interface chip i82555 PHY #1.
    Secondary interface chip i82555.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x3258698e).
PCI: Found IRQ 11 for device 01:0a.0
eth2: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2),
00:02:B3:87:86:9D, IRQ 11.
  Board assembly 751767-004, Physical connectors
present: RJ45
  Primary interface chip i82555 PHY #1.
    Secondary interface chip i82555.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x3258698e).
PCI: Found IRQ 11 for device 01:09.0
eth3: Intel Corp. 82557/8/9 [Ethernet Pro 100],
00:02:B3:87:81:41, IRQ 11.
  Board assembly 751767-004, Physical connectors
present: RJ45
  Primary interface chip i82555 PHY #1.
    Secondary interface chip i82555.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x3258698e).
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory:
93M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver
v1.1
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xef40, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF c7e184e0, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: ef40
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c7e184e0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Found IRQ 9 for device 00:1f.4
PCI: Sharing IRQ 9 with 01:0b.0
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xef80, IRQ 9
usb.c: new USB bus registered, assigned bus number 2
uhci.c: detected 2 ports
usb.c: kmalloc IF c7e185e0, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: ef80
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c7e185e0
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind
8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 80k freed
uhci.c: ef40: suspend_hc
uhci.c: ef80: suspend_hc
Adding Swap: 265064k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal
journal
hdc: DMA disabled

-----------------------------------------------------
THE OUTPUT OF DMESG OF NODE6:

Linux version 2.4.19 (root@node2) (gcc version 2.96
20000731 (Red Hat Linux 7.3 2.96-110)) #4 Mon Dec 9
18:29:46 CST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00
(usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000
(usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI
NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI
data)
BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000
(reserved)
255MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda1
Initializing CPU#0
Detected 2391.484 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4757.16 BogoMIPS
Memory: 256680k/262080k available (1366k kernel code,
5012k reserved, 524k data, 80k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6,
262144 bytes)
Inode cache hash table entries: 16384 (order: 5,
131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768
bytes)
Buffer-cache hash table entries: 16384 (order: 4,
65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144
bytes)
CPU: Before vendor init, caps: 3febfbff 00000000
00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 3febfbff 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febfbff 00000000
00000000 00000000
CPU:             Common caps: 3febfbff 00000000
00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb000, last
bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
PCI: Found IRQ 9 for device 00:1f.1
PCI: Cannot allocate resource region 1 of device
03:06.0
PCI: Cannot allocate resource region 1 of device
03:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996
[email protected]).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource
collisions
ICH4: (ide_setup_pci_device:) Could not enable device.
HPT372: IDE controller on PCI bus 02 dev 40
HPT372: detected chipset, but driver not compiled in!
PCI: Found IRQ 11 for device 02:08.0
HPT372: chipset revision 5
HPT372: not 100% native mode: will probe irqs later
    ide2: BM-DMA at 0xc800-0xc807, BIOS settings:
hde:pio, hdf:pio
    ide3: BM-DMA at 0xc808-0xc80f, BIOS settings:
hdg:pio, hdh:pio
hda: ST340016A, ATA DISK drive
hdc: FX4831T, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78165360 sectors (40021 MB) w/2048KiB Cache,
CHS=4865/255/63
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.25
PCI: Found IRQ 9 for device 02:05.0
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800000,
00:40:ca:31:84:b4, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory:
203M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i845 @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
es1371: version v0.30 time 18:27:13 Dec  9 2002
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver
v1.1
PCI: Setting latency timer of device 00:1d.0 to 64
uhci.c: USB UHCI at I/O 0xd800, IRQ 9
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF cfeee380, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d800
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cfeee380
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Setting latency timer of device 00:1d.1 to 64
uhci.c: USB UHCI at I/O 0xd000, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
uhci.c: detected 2 ports
usb.c: kmalloc IF cfeee480, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cfeee480
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Setting latency timer of device 00:1d.2 to 64
uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb.c: new USB bus registered, assigned bus number 3
uhci.c: detected 2 ports
usb.c: kmalloc IF cfeee580, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cfeee580
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
<[email protected]>
hid-core.c: USB HID support drivers
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind
16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
uhci.c: d800: suspend_hc
ds: no socket drivers loaded!
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 80k freed
uhci.c: d000: suspend_hc
uhci.c: d400: suspend_hc
Adding Swap: 522104k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal
journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal
journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media 10base2 (#17) described by a
21140 non-MII (0) block.
tulip0:  MII transceiver #1 config 3100 status 7829
advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at 0xa000,
00:60:F5:07:04:0C, IRQ 5.
tulip1:  EEPROM default media type Autosense.
tulip1:  Index #0 - Media 10base2 (#17) described by a
21140 non-MII (0) block.
tulip1:  MII transceiver #1 config 3100 status 7829
advertising 01e1.
eth2: Digital DS21143 Tulip rev 65 at 0xa400,
00:60:F5:07:04:0D, IRQ 5.
tulip2:  EEPROM default media type Autosense.
tulip2:  Index #0 - Media 10base2 (#17) described by a
21140 non-MII (0) block.
tulip2:  MII transceiver #1 config 3100 status 7809
advertising 01e1.
eth3: Digital DS21143 Tulip rev 65 at 0xa800,
00:60:F5:07:04:0E, IRQ 11.
tulip3:  EEPROM default media type Autosense.
tulip3:  Index #0 - Media 10base2 (#17) described by a
21140 non-MII (0) block.
tulip3:  MII transceiver #1 config 3100 status 7829
advertising 01e1.
eth4: Digital DS21143 Tulip rev 65 at 0xac00,
00:60:F5:07:04:0F, IRQ 9.
eth1: Setting full-duplex based on MII#1 link partner
capability of 41e1.
eth2: Setting full-duplex based on MII#1 link partner
capability of 41e1.
eth4: Setting full-duplex based on MII#1 link partner
capability of 45e1.

------------------------------------------
THE OUTPUT OF IFCONFIG ON NODE1
eth0      Link encap:Ethernet  HWaddr
00:02:B3:87:83:B4  
          inet addr:192.168.2.1  Bcast:192.168.2.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:13 errors:0 dropped:0 overruns:0
frame:0
          TX packets:1140 errors:0 dropped:0
overruns:2 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:1052 (1.0 Kb)  TX bytes:88676 (86.5
Kb)
          Interrupt:10 

eth1      Link encap:Ethernet  HWaddr
00:02:B3:87:80:06  
          inet addr:192.168.1.1  Bcast:192.168.1.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:1308 errors:0 dropped:0
overruns:0 frame:0
          TX packets:1268 errors:0 dropped:0
overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:110880 (108.2 Kb)  TX bytes:108968
(106.4 Kb)
          Interrupt:9 Base address:0x2000 

eth2      Link encap:Ethernet  HWaddr
00:02:B3:87:86:9D  
          inet addr:192.168.15.1  Bcast:192.168.15.255
Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:1142 errors:0 dropped:0
overruns:683 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 b)  TX bytes:88416 (86.3 Kb)
          Interrupt:11 Base address:0x4000 

eth3      Link encap:Ethernet  HWaddr
00:02:B3:87:81:41  
          inet addr:192.168.0.1  Bcast:192.168.0.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:5542 errors:0 dropped:0
overruns:0 frame:0
          TX packets:825 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:611550 (597.2 Kb)  TX bytes:92758
(90.5 Kb)
          Interrupt:11 Base address:0x6000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:54 errors:0 dropped:0 overruns:0
frame:0
          TX packets:54 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:4628 (4.5 Kb)  TX bytes:4628 (4.5
Kb)


--------------------------------------------
THE OUTPUT OF IFCONFIG ON NODE6
eth1      Link encap:Ethernet  HWaddr
00:60:F5:07:04:0C  
          inet addr:192.168.9.6  Bcast:192.168.9.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:1323 errors:1 dropped:0
overruns:0 frame:0
          TX packets:1337 errors:3 dropped:0
overruns:0 carrier:3
          collisions:0 txqueuelen:100 
          RX bytes:112202 (109.5 Kb)  TX bytes:115386
(112.6 Kb)
          Interrupt:5 Base address:0xa000 

eth2      Link encap:Ethernet  HWaddr
00:60:F5:07:04:0D  
          inet addr:192.168.8.6  Bcast:192.168.8.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:1144 errors:1 dropped:0
overruns:0 frame:0
          TX packets:1174 errors:3 dropped:0
overruns:0 carrier:3
          collisions:0 txqueuelen:100 
          RX bytes:89106 (87.0 Kb)  TX bytes:96856
(94.5 Kb)
          Interrupt:5 Base address:0xa400 

eth3      Link encap:Ethernet  HWaddr
00:60:F5:07:04:0E  
          inet addr:192.168.15.6  Bcast:192.168.15.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:1157 dropped:0
overruns:0 carrier:1157
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:11 Base address:0xa800 

eth4      Link encap:Ethernet  HWaddr
00:60:F5:07:04:0F  
          inet addr:192.168.0.6  Bcast:192.168.0.255 
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1
          RX packets:5798 errors:1 dropped:0
overruns:0 frame:0
          TX packets:924 errors:3 dropped:0 overruns:0
carrier:3
          collisions:0 txqueuelen:100 
          RX bytes:638158 (623.2 Kb)  TX bytes:104940
(102.4 Kb)
          Interrupt:9 Base address:0xac00 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0
frame:0
          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)









---------------------------------
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.