AW: [eepro100] i82559er problem
"Bernd Stahlbock" <[email protected]> Wed, 14 Aug 2002 09:56:53 +0200
| Newsgroups | gmane.linux.drivers.eepro100.user |
|---|---|
| Message-ID | <001b01c24368$27252240$49bd04d9@ipc> |
Dear Pavan, This is interessing: you say an external network card with 558/559 works well. I tried an external card with a 559ER, and it also works. So maybe a hardware problem on the cpu board? The same Linux Netboot image runs fine with external 559ER but runs not with internal 559ER. best regards Bernd -----Ursprungliche Nachricht----- Von: [email protected] [mailto:[email protected]]Im Auftrag von Pavan Sikka Gesendet: Freitag, 9. August 2002 09:40 An: [email protected]; [email protected] Betreff: [eepro100] [eepro100-bug] i82559er problem Background: We have been using computer boards manufactured by EEPD (www.eepd.com) that have worked very well for us over the last few years. Recently, they changed the on-board network chip from the stock i82559 (PCI dev id 0x1229) to the 82559ER (PCI dev id 0x1209). With this chip, as soon as the network traffic increased, the network crashed. We finally pinpointed the problem to out-going traffic and can now recreate it using flood pinging. Interestingly, when we put an external NIC containing the stock i82558/9 chip, things work quite well.