Re: gammu-detect on ARM

Hi. Please post your dmesg contents and what log wvdialconf says!

2015-11-05 22:42 GMT-02:00 João M. S. Silva <[email protected]>:

> Hi again,
>
> Anyone using gammu on an ARM platform?
>
> I'm now experimenting with the SIM800 module in Ubuntu 14.04.3 on an ARM
> platform with a serial connection (no USB adapter). gammu-detect does
> not detect the modem:
>
> $ gammu-detect
> ; Configuration file generated by gammu-detect.
> ; Please check The Gammu Manual for more information.
>
> [gammu]
> device = /dev/ttyS5
> name = Phone on serial port 5
> connection = at
>
> opening socket: No such device
>
> The result /dev/ttyS5 is wrong. The modem is in /dev/ttyS4. If I use the
> following configuration file, gammu works:
>
> $ cat gammu.conf
> [gammu]
> device = /dev/ttyS4
> name = Phone on serial port 4
> connection = at
>
> So, why can't gammu auto-detect the modem, but it works if I manually
> configure the correct serial port?
>
> Also, wvdial does not detect any modem and it does not work with a
> correct configuration file that I copied from the Intel platform.
>
> Any difference for an ARM platform?
>
> --
> João M. S. Silva
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Gammu-users mailing list -
> https://lists.sourceforge.net/lists/listinfo/gammu-users
>



-- 
gilberto dos santos alves
+55(11)9-8646-5049
sao paulo - sp - brasil

------------------------------------------------------------------------------

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users