Re: Huawei E156 - Not receiving calls
Paulo Roberto <[email protected]>
| Newsgroups | gmane.linux.drivers.gammu |
|---|---|
| Message-ID | <CA+96iqe1FnBnrK0rtyVJMmta24bMYd7woPETyuaUq9s8rCoPag@mail.gmail.com> |
Hello Gilberto.
I'm using the following piece of code to set debug level:
GSM_Debug_Info *debug_info;
...
debug_info = GSM_GetGlobalDebug();
GSM_SetDebugFileDescriptor(stderr, FALSE, debug_info);
GSM_SetDebugLevel("textall", debug_info);
Where could I explicitly set log_level to 255?
Anyway I installed the modem on a Windows Virtual Machine. The Hardware ID
is:
USB\VID_12D1&PID_1003&REV_0000&MI_00
USB\VID_12D1&PID_1003&MI_00
I didn't realize I posted IMEI info. Thanks for the tip.
I also tested my code successfully on a Samsung GT-E2220. I received calls
normally.
Back to the E156
Follow another output (Debug format textall) using a code that calls
GSM_SetIncomingCall and GSM_SetIncomingCallCallback:
[Gammu - 1.37.4]
[Connection - "at"]
[Connection index - 0]
[Model type - ""]
[Device - "/dev/ttyUSB0"]
Serial device: DTR is up, RTS is up, CAR is up, CTS is up
Setting speed to 115200
[Module - "auto"]
Escaping SMS mode
SENDING frame type 0x00/length 0x02/2
1B |0D
..
Sending simple AT command to wake up some devices
SENDING frame type 0x00/length 0x03/3
41A|54T|0D
AT.
1 "AT"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x09/9
41A|54T|0D |0D |0A |4FO|4BK|0D |0A
AT...OK..
Enabling echo
SENDING frame type 0x00/length 0x05/5
41A|54T|45E|311|0D
ATE1.
1 "ATE1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x0B/11
41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A
ATE1...OK..
Trying Motorola mode switch
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D
AT+MODE=2.
1 "AT+MODE=2"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x13/19
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |45E|52R|52R|4FO
AT+MODE=2...ERRO
52R|0D |0A
R..
Seems not to be supported
Enabling CME errors
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D
AT+CMEE=1.
1 "AT+CMEE=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x10/16
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
AT+CMEE=1...OK..
SENDING frame type 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|53S|3F?|0D
AT+CSCS?.
1 "AT+CSCS?"
2 "+CSCS: "GSM""
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1F/31
41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S
AT+CSCS?...+CSCS
3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A :
"GSM"....OK..
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D
AT+CSCS=?.
1 "AT+CSCS=?"
2 "+CSCS: ("IRA","GSM","UCS2")"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x2F/47
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C
AT+CSCS=?...+CSC
53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S:
("IRA","GSM",
22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A
"UCS2")....OK..
Chosen GSM as normal charset
Chosen UCS2 as unicode charset
Getting model
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|4DM|0D
AT+CGMM.
1 "AT+CGMM"
2 "E156"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x16/22
41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|355|366|0D |0A
AT+CGMM...E156..
0D |0A |4FO|4BK|0D |0A
..OK..
Unknown model, but it should still work
[Model name: `E156']
[Model data: `']
[Model data: `unknown']
[Connected model - "E156"]
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|49I|0D
AT+CGMI.
1 "AT+CGMI"
2 "huawei"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x18/24
41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
AT+CGMI...huawei
0D |0A |0D |0A |4FO|4BK|0D |0A
....OK..
Manufacturer info received
[Manufacturer: Huawei]
Checking for OBEX support
SENDING frame type 0x00/length 0x0B/11
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D
AT+CPROT=?.
1 "AT+CPROT=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x14/20
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |45E|52R|52R
AT+CPROT=?...ERR
4FO|52R|0D |0A
OR..
Checking for SYNCML/OBEX support
SENDING frame type 0x00/length 0x0C/12
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D
AT+SYNCML=?.
1 "AT+SYNCML=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x15/21
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |45E|52R
AT+SYNCML=?...ER
52R|4FO|52R|0D |0A
ROR..
SENDING frame type 0x00/length 0x0D/13
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D
AT$TSSPCSW=?.
1 "AT$TSSPCSW=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x16/22
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |45E
AT$TSSPCSW=?...E
52R|52R|4FO|52R|0D |0A
RROR..
[Module -
"A2D|iPAQ|at|M20|S25|MC35|TC35|C35i|S65|S300|5110|5130|5190|5210|6110|6130|6150|6190|6210|6250|6310|6310i|6510|7110|8210|8250|8290|8310|8390|8850|8855|8890|8910|9110|9210"]
Escaping SMS mode
SENDING frame type 0x00/length 0x02/2
1B |0D
..
Sending simple AT command to wake up some devices
SENDING frame type 0x00/length 0x03/3
41A|54T|0D
AT.
1 "AT"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x09/9
41A|54T|0D |0D |0A |4FO|4BK|0D |0A
AT...OK..
Enabling echo
SENDING frame type 0x00/length 0x05/5
41A|54T|45E|311|0D
ATE1.
1 "ATE1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x0B/11
41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A
ATE1...OK..
Trying Motorola mode switch
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D
AT+MODE=2.
1 "AT+MODE=2"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x13/19
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |45E|52R|52R|4FO
AT+MODE=2...ERRO
52R|0D |0A
R..
Seems not to be supported
Enabling CME errors
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D
AT+CMEE=1.
1 "AT+CMEE=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x10/16
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
AT+CMEE=1...OK..
SENDING frame type 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|53S|3F?|0D
AT+CSCS?.
1 "AT+CSCS?"
2 "+CSCS: "GSM""
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1F/31
41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S
AT+CSCS?...+CSCS
3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A :
"GSM"....OK..
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D
AT+CSCS=?.
1 "AT+CSCS=?"
2 "+CSCS: ("IRA","GSM","UCS2")"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x2F/47
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C
AT+CSCS=?...+CSC
53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S:
("IRA","GSM",
22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A
"UCS2")....OK..
Chosen GSM as normal charset
Chosen UCS2 as unicode charset
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|49I|0D
AT+CGMI.
1 "AT+CGMI"
2 "huawei"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x18/24
41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
AT+CGMI...huawei
0D |0A |0D |0A |4FO|4BK|0D |0A
....OK..
Manufacturer info received
[Manufacturer: Huawei]
Checking for OBEX support
SENDING frame type 0x00/length 0x0B/11
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D
AT+CPROT=?.
1 "AT+CPROT=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x14/20
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |45E|52R|52R
AT+CPROT=?...ERR
4FO|52R|0D |0A
OR..
Checking for SYNCML/OBEX support
SENDING frame type 0x00/length 0x0C/12
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D
AT+SYNCML=?.
1 "AT+SYNCML=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x15/21
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |45E|52R
AT+SYNCML=?...ER
52R|4FO|52R|0D |0A
ROR..
SENDING frame type 0x00/length 0x0D/13
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D
AT$TSSPCSW=?.
1 "AT$TSSPCSW=?"
2 "ERROR"
Checking line: ERROR
AT reply state: 3
RECEIVED frame type 0x00/length 0x16/22
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |45E
AT$TSSPCSW=?...E
52R|52R|4FO|52R|0D |0A
RROR..
Getting firmware versions
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|52R|0D
AT+CGMR.
1 "AT+CGMR"
2 "11.604.09.01.149"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x22/34
41A|54T|2B+|43C|47G|4DM|52R|0D |0D |0A |311|311|2E.|366|300|344
AT+CGMR...11.604
2E.|300|399|2E.|300|311|2E.|311|344|399|0D |0A |0D |0A |4FO|4BK
.09.01.149....OK
0D |0A
..
Received firmware version: "11.604.09.01.149"
Number version is "11,604090"
[Firmware version - "11.604.09.01.149"]
[Connected]
Entering GSM_SetIncomingCall
Enabling incoming call notification
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|4CL|49I|50P|3D=|311|0D
AT+CLIP=1.
1 "AT+CLIP=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x10/16
41A|54T|2B+|43C|4CL|49I|50P|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
AT+CLIP=1...OK..
SENDING frame type 0x00/length 0x09/9
41A|54T|2B+|43C|52R|43C|3D=|311|0D
AT+CRC=1.
1 "AT+CRC=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x0F/15
41A|54T|2B+|43C|52R|43C|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
AT+CRC=1...OK..
SENDING frame type 0x00/length 0x0A/10
41A|54T|2B+|43C|43C|57W|41A|3D=|311|0D
AT+CCWA=1.
1 "AT+CCWA=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x10/16
41A|54T|2B+|43C|43C|57W|41A|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
AT+CCWA=1...OK..
Leaving GSM_SetIncomingCall
Device details:
Device : /dev/ttyUSB0
Entering GSM_GetManufacturer
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|49I|0D
AT+CGMI.
1 "AT+CGMI"
2 "huawei"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x18/24
41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
AT+CGMI...huawei
0D |0A |0D |0A |4FO|4BK|0D |0A
....OK..
Manufacturer info received
[Manufacturer: Huawei]
Leaving GSM_GetManufacturer
Manufacturer : Huawei
Entering GSM_GetModel
Getting model
SENDING frame type 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|4DM|0D
AT+CGMM.
1 "AT+CGMM"
2 "E156"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x16/22
41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|355|366|0D |0A
AT+CGMM...E156..
0D |0A |4FO|4BK|0D |0A
..OK..
Unknown model, but it should still work
[Model name: `E156']
[Model data: `']
[Model data: `unknown']
[Connected model - "E156"]
Leaving GSM_GetModel
Model : unknown (E156)
Press Ctrl+C to interrupt
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Signal Strength = 78%
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
Entering GSM_GetSignalQuality
Getting signal quality info
SENDING frame type 0x00/length 0x07/7
41A|54T|2B+|43C|53S|51Q|0D
AT+CSQ.
1 "AT+CSQ"
2 "+CSQ: 26,99"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frame type 0x00/length 0x1C/28
41A|54T|2B+|43C|53S|51Q|0D |0D |0A |2B+|43C|53S|51Q|3A:|20 |322
AT+CSQ...+CSQ: 2
366|2C,|399|399|0D |0A |0D |0A |4FO|4BK|0D |0A
6,99....OK..
Signal quality info received
Parsing +CSQ: 26,99 with +CSQ: @i, @i
Parsed int 26
Parsed int 99
Leaving GSM_GetSignalQuality
On Wed, Jul 27, 2016 at 9:39 AM, gilberto dos santos alves <[email protected]
> wrote:
> hummm. in this case for PC, IMO is better using loglevel = 255 and see
> fragment that apply to timestamp where call is going on. e220 is a very
> good chipset and standards features.
> For Raspberry we need what shell, build etc because there are many
> alternatives, options, processors, etc.
> .ps imei many times is a private information to post on these lists. is
> better change posts to some fake numbers.
>
> 2016-07-26 20:34 GMT-03:00 Paulo Roberto <[email protected]>:
>
>> Gilberto,
>>
>> I'm not using Windows. The 2 machines where I'm running my application
>> are Linux machines.
>> One is a PC and the other is a Raspberry Pi.
>>
>> I didn't understand the "log commands with IMEI scrambled".
>>
>> The Dmesg output from the PC:
>>
>> [46854.112178] usb 1-1.6: new high-speed USB device number 7 using
>> ehci-pci
>> [46854.215462] usb 1-1.6: New USB device found, idVendor=12d1,
>> idProduct=1003
>> [46854.215470] usb 1-1.6: New USB device strings: Mfr=2, Product=1,
>> SerialNumber=0
>> [46854.215474] usb 1-1.6: Product: HUAWEI Mobile
>> [46854.215477] usb 1-1.6: Manufacturer: HUAWEI Technology
>> [46854.216828] usb-storage 1-1.6:1.0: USB Mass Storage device detected
>> [46854.217610] scsi host10: usb-storage 1-1.6:1.0
>> [46854.426170] usb 1-1.6: USB disconnect, device number 7
>> [46860.768192] usb 1-1.6: new high-speed USB device number 8 using
>> ehci-pci
>> [46860.871452] usb 1-1.6: New USB device found, idVendor=12d1,
>> idProduct=1003
>> [46860.871459] usb 1-1.6: New USB device strings: Mfr=2, Product=1,
>> SerialNumber=0
>> [46860.871463] usb 1-1.6: Product: HUAWEI Mobile
>> [46860.871466] usb 1-1.6: Manufacturer: HUAWEI Technology
>> [46860.873194] usb-storage 1-1.6:1.0: USB Mass Storage device detected
>> [46860.873562] usb-storage 1-1.6:1.1: USB Mass Storage device detected
>> [46860.873850] usb-storage 1-1.6:1.2: USB Mass Storage device detected
>> [46860.874593] scsi host10: usb-storage 1-1.6:1.2
>> [46860.874867] usb-storage 1-1.6:1.3: USB Mass Storage device detected
>> [46860.875388] scsi host11: usb-storage 1-1.6:1.3
>> [46860.972162] usbcore: registered new interface driver usbserial
>> [46860.972173] usbcore: registered new interface driver usbserial_generic
>> [46860.972181] usbserial: USB Serial support registered for generic
>> [46861.037105] usbcore: registered new interface driver option
>> [46861.037118] usbserial: USB Serial support registered for GSM modem
>> (1-port)
>> [46861.037210] option 1-1.6:1.0: GSM modem (1-port) converter detected
>> [46861.037307] usb 1-1.6: GSM modem (1-port) converter now attached to
>> ttyUSB0
>> [46861.037325] option 1-1.6:1.1: GSM modem (1-port) converter detected
>> [46861.037399] usb 1-1.6: GSM modem (1-port) converter now attached to
>> ttyUSB1
>>
>>
>> lsusb output:
>> Bus 001 Device 008: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA
>> Modem / E230/E270/E870 HSDPA/HSUPA Modem
>>
>> ls -lh /dev/ttyUSB0 /dev/ttyUSB1
>> crw-rw---- 1 root dialout 188, 0 Jul 26 20:24 /dev/ttyUSB0
>> crw-rw---- 1 root dialout 188, 1 Jul 26 20:30 /dev/ttyUSB1
>>
>> The user have the right permissions.
>>
>>
>>
>> On Tue, Jul 26, 2016 at 2:10 PM, gilberto dos santos alves <
>> [email protected]> wrote:
>>
>>> Hi. please could you post details about your windows driver for your
>>> modem? like this sample for mf190 v:
>>>
>>> id hardware: USB\VID_19D2&PID_0117&REV_0000&MI_02
>>>
>>> log commands with
>>> imei scrambled
>>>
>>> ATQ0V1E0 - OK
>>> AT+GMM - MF190
>>> AT+FCLASS=? - +FCLASS: (0-1)
>>> AT#CLS=? - COMANDO SEM SUPORTE
>>> AT+GCI? - COMANDO SEM SUPORTE
>>> AT+GCI=? - COMANDO SEM SUPORTE
>>> ATI1 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI2 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI3 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI4 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI5 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI6 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>> ATI7 - Manufacturer: ZTE CORPORATION
>>> Model: MF190
>>> Revision: BD_MF190V1.0.0B22
>>> IMEI: 121212121212121
>>> +GCAP: +CGSM,+DS,+ES
>>>
>>>
>>> 2016-07-26 12:31 GMT-03:00 gilberto dos santos alves <[email protected]>:
>>>
>>>> yes now i understand. i will search/test this with one zte mf190 and
>>>> compare with your huawei e156. thanks.
>>>>
>>>> 2016-07-25 22:21 GMT-03:00 Paulo Roberto <[email protected]>:
>>>>
>>>>> Sorry,
>>>>> I'm going to try to clarify things:
>>>>>
>>>>> I have a modem Huawei E156 connected to my PC. Within the modem there
>>>>> is a SIM Card from a certain Telecom.
>>>>> I wish to make a call to the phone number of this SIM Card and using
>>>>> Gammu I'd like to detect this call, register the caller id (phone number)
>>>>> and hang up (finish call without answering it).
>>>>>
>>>>> This workflow is working fine when I use as a modem a Motorola EX108
>>>>> (same SIM CARD) instead of the E156.
>>>>> I can call the phone number of this SIM Card, the Gammu starts my
>>>>> callback function and it does what it should do.
>>>>>
>>>>> When I use the E156, I'm not even able to complete the call. The
>>>>> telecom instantly starts a voice message telling me it cannot complete my
>>>>> call.
>>>>>
>>>>> Was I clear, this time?
>>>>>
>>>>> Sorry for the confusion and thanks again.
>>>>>
>>>>>
>>>>> On Mon, Jul 25, 2016 at 8:49 PM, gilberto dos santos alves <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> sorry i do not understand well.
>>>>>> "but when I try to call it, the operator didn't let the call even
>>>>>> finish saying that the number is not available"
>>>>>> your cell is ring and you left it with this state until your inbox
>>>>>> record message is started or you want trigger one event "finish call" and
>>>>>> after make a call to number that was registered?
>>>>>> your operator is your telecom company?
>>>>>> is this correct? please clarify what is workflow intended.
>>>>>>
>>>>>> 2016-07-25 20:07 GMT-03:00 Paulo Roberto <[email protected]>:
>>>>>>
>>>>>>> Hello.
>>>>>>>
>>>>>>> I have a 3G modem model: Huawei E156 that I would like to use to
>>>>>>> detect received calls.
>>>>>>> I don't want to answer the call, just identify it and hung up. Using
>>>>>>> the GSM_SetIncomingCallCallback and a respective callback.
>>>>>>> I can get information as model, Manufacturer, signal strength and
>>>>>>> even receive SMS messages, but when I try to call it, the operator didn't
>>>>>>> let the call even finish saying that the number is not available.
>>>>>>>
>>>>>>> When using a mobile phone (Motorola EX108) as the modem everything
>>>>>>> works fine.
>>>>>>>
>>>>>>> How do I know for sure if the problem is the support of the device
>>>>>>> for receiving calls or is something I'm not doing right, or maybe any extra
>>>>>>> configuration?
>>>>>>> I appreciate any help.
>>>>>>>
>>>>>>> Thanks in advance.
>>>>>>>
>>>>>>> When running a simple C code to get Manufacturer and model with
>>>>>>> debug enabled I got the following output:
>>>>>>>
>>>>>>> [Gammu - 1.37.3]
>>>>>>> [Connection - "at"]
>>>>>>> [Connection index - 0]
>>>>>>> [Model type - ""]
>>>>>>> [Device - "/dev/ttyUSB0"]
>>>>>>> Serial device: DTR is up, RTS is up, CAR is up, CTS is up
>>>>>>> Setting speed to 115200
>>>>>>> [Module - "auto"]
>>>>>>> Escaping SMS mode
>>>>>>> SENDING frame type 0x00/length 0x02/2
>>>>>>> 1B |0D
>>>>>>> ..
>>>>>>> Sending simple AT command to wake up some devices
>>>>>>> SENDING frame type 0x00/length 0x03/3
>>>>>>> 41A|54T|0D
>>>>>>> AT.
>>>>>>> 1 "AT"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x09/9
>>>>>>> 41A|54T|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> AT...OK..
>>>>>>> Enabling echo
>>>>>>> SENDING frame type 0x00/length 0x05/5
>>>>>>> 41A|54T|45E|311|0D
>>>>>>> ATE1.
>>>>>>> 1 "ATE1"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x0B/11
>>>>>>> 41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> ATE1...OK..
>>>>>>> Trying Motorola mode switch
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D
>>>>>>> AT+MODE=2.
>>>>>>> 1 "AT+MODE=2"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x13/19
>>>>>>> 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |45E|52R|52R|4FO
>>>>>>> AT+MODE=2...ERRO
>>>>>>> 52R|0D |0A
>>>>>>> R..
>>>>>>> Seems not to be supported
>>>>>>> Enabling CME errors
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D
>>>>>>> AT+CMEE=1.
>>>>>>> 1 "AT+CMEE=1"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x10/16
>>>>>>> 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> AT+CMEE=1...OK..
>>>>>>> SENDING frame type 0x00/length 0x09/9
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D
>>>>>>> AT+CSCS?.
>>>>>>> 1 "AT+CSCS?"
>>>>>>> 2 "+CSCS: "IRA""
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x1F/31
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S
>>>>>>> AT+CSCS?...+CSCS
>>>>>>> 3A:|20 |22"|49I|52R|41A|22"|0D |0A |0D |0A |4FO|4BK|0D |0A :
>>>>>>> "IRA"....OK..
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D
>>>>>>> AT+CSCS=?.
>>>>>>> 1 "AT+CSCS=?"
>>>>>>> 2 "+CSCS: ("IRA","GSM","UCS2")"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x2F/47
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C
>>>>>>> AT+CSCS=?...+CSC
>>>>>>> 53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S:
>>>>>>> ("IRA","GSM",
>>>>>>> 22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A
>>>>>>> "UCS2")....OK..
>>>>>>> Chosen GSM as normal charset
>>>>>>> Chosen UCS2 as unicode charset
>>>>>>> SENDING frame type 0x00/length 0x0E/14
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D
>>>>>>> AT+CSCS="GSM".
>>>>>>> 1 "AT+CSCS="GSM""
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x14/20
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D |0D |0A
>>>>>>> AT+CSCS="GSM"...
>>>>>>> 4FO|4BK|0D |0A
>>>>>>> OK..
>>>>>>> SENDING frame type 0x00/length 0x09/9
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D
>>>>>>> AT+CSCS?.
>>>>>>> 1 "AT+CSCS?"
>>>>>>> 2 "+CSCS: "GSM""
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x1F/31
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S
>>>>>>> AT+CSCS?...+CSCS
>>>>>>> 3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A :
>>>>>>> "GSM"....OK..
>>>>>>> Getting model
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|4DM|0D
>>>>>>> AT+CGMM.
>>>>>>> 1 "AT+CGMM"
>>>>>>> 2 "E156"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x16/22
>>>>>>> 41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|355|366|0D |0A
>>>>>>> AT+CGMM...E156..
>>>>>>> 0D |0A |4FO|4BK|0D |0A
>>>>>>> ..OK..
>>>>>>> Unknown model, but it should still work
>>>>>>> [Model name: `E156']
>>>>>>> [Model data: `']
>>>>>>> [Model data: `unknown']
>>>>>>> [Connected model - "E156"]
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D
>>>>>>> AT+CGMI.
>>>>>>> 1 "AT+CGMI"
>>>>>>> 2 "huawei"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x18/24
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
>>>>>>> AT+CGMI...huawei
>>>>>>> 0D |0A |0D |0A |4FO|4BK|0D |0A
>>>>>>> ....OK..
>>>>>>> Manufacturer info received
>>>>>>> [Manufacturer: Huawei]
>>>>>>> Checking for OBEX support
>>>>>>> SENDING frame type 0x00/length 0x0B/11
>>>>>>> 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D
>>>>>>> AT+CPROT=?.
>>>>>>> 1 "AT+CPROT=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x14/20
>>>>>>> 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |45E|52R|52R
>>>>>>> AT+CPROT=?...ERR
>>>>>>> 4FO|52R|0D |0A
>>>>>>> OR..
>>>>>>> Checking for SYNCML/OBEX support
>>>>>>> SENDING frame type 0x00/length 0x0C/12
>>>>>>> 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D
>>>>>>> AT+SYNCML=?.
>>>>>>> 1 "AT+SYNCML=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x15/21
>>>>>>> 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |45E|52R
>>>>>>> AT+SYNCML=?...ER
>>>>>>> 52R|4FO|52R|0D |0A
>>>>>>> ROR..
>>>>>>> SENDING frame type 0x00/length 0x0D/13
>>>>>>> 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D
>>>>>>> AT$TSSPCSW=?.
>>>>>>> 1 "AT$TSSPCSW=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x16/22
>>>>>>> 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |45E
>>>>>>> AT$TSSPCSW=?...E
>>>>>>> 52R|52R|4FO|52R|0D |0A
>>>>>>> RROR..
>>>>>>> [Module -
>>>>>>> "A2D|iPAQ|at|M20|S25|MC35|TC35|C35i|S65|S300|5110|5130|5190|5210|6110|6130|6150|6190|6210|6250|6310|6310i|6510|7110|8210|8250|8290|8310|8390|8850|8855|8890|8910|9110|9210"]
>>>>>>> Escaping SMS mode
>>>>>>> SENDING frame type 0x00/length 0x02/2
>>>>>>> 1B |0D
>>>>>>> ..
>>>>>>> Sending simple AT command to wake up some devices
>>>>>>> SENDING frame type 0x00/length 0x03/3
>>>>>>> 41A|54T|0D
>>>>>>> AT.
>>>>>>> 1 "AT"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x09/9
>>>>>>> 41A|54T|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> AT...OK..
>>>>>>> Enabling echo
>>>>>>> SENDING frame type 0x00/length 0x05/5
>>>>>>> 41A|54T|45E|311|0D
>>>>>>> ATE1.
>>>>>>> 1 "ATE1"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x0B/11
>>>>>>> 41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> ATE1...OK..
>>>>>>> Trying Motorola mode switch
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D
>>>>>>> AT+MODE=2.
>>>>>>> 1 "AT+MODE=2"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x13/19
>>>>>>> 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |45E|52R|52R|4FO
>>>>>>> AT+MODE=2...ERRO
>>>>>>> 52R|0D |0A
>>>>>>> R..
>>>>>>> Seems not to be supported
>>>>>>> Enabling CME errors
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D
>>>>>>> AT+CMEE=1.
>>>>>>> 1 "AT+CMEE=1"
>>>>>>> 2 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x10/16
>>>>>>> 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A
>>>>>>> AT+CMEE=1...OK..
>>>>>>> SENDING frame type 0x00/length 0x09/9
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D
>>>>>>> AT+CSCS?.
>>>>>>> 1 "AT+CSCS?"
>>>>>>> 2 "+CSCS: "GSM""
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x1F/31
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S
>>>>>>> AT+CSCS?...+CSCS
>>>>>>> 3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A :
>>>>>>> "GSM"....OK..
>>>>>>> SENDING frame type 0x00/length 0x0A/10
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D
>>>>>>> AT+CSCS=?.
>>>>>>> 1 "AT+CSCS=?"
>>>>>>> 2 "+CSCS: ("IRA","GSM","UCS2")"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x2F/47
>>>>>>> 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C
>>>>>>> AT+CSCS=?...+CSC
>>>>>>> 53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S:
>>>>>>> ("IRA","GSM",
>>>>>>> 22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A
>>>>>>> "UCS2")....OK..
>>>>>>> Chosen GSM as normal charset
>>>>>>> Chosen UCS2 as unicode charset
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D
>>>>>>> AT+CGMI.
>>>>>>> 1 "AT+CGMI"
>>>>>>> 2 "huawei"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x18/24
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
>>>>>>> AT+CGMI...huawei
>>>>>>> 0D |0A |0D |0A |4FO|4BK|0D |0A
>>>>>>> ....OK..
>>>>>>> Manufacturer info received
>>>>>>> [Manufacturer: Huawei]
>>>>>>> Checking for OBEX support
>>>>>>> SENDING frame type 0x00/length 0x0B/11
>>>>>>> 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D
>>>>>>> AT+CPROT=?.
>>>>>>> 1 "AT+CPROT=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x14/20
>>>>>>> 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |45E|52R|52R
>>>>>>> AT+CPROT=?...ERR
>>>>>>> 4FO|52R|0D |0A
>>>>>>> OR..
>>>>>>> Checking for SYNCML/OBEX support
>>>>>>> SENDING frame type 0x00/length 0x0C/12
>>>>>>> 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D
>>>>>>> AT+SYNCML=?.
>>>>>>> 1 "AT+SYNCML=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x15/21
>>>>>>> 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |45E|52R
>>>>>>> AT+SYNCML=?...ER
>>>>>>> 52R|4FO|52R|0D |0A
>>>>>>> ROR..
>>>>>>> SENDING frame type 0x00/length 0x0D/13
>>>>>>> 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D
>>>>>>> AT$TSSPCSW=?.
>>>>>>> 1 "AT$TSSPCSW=?"
>>>>>>> 2 "ERROR"
>>>>>>> Checking line: ERROR
>>>>>>> AT reply state: 3
>>>>>>> RECEIVED frame type 0x00/length 0x16/22
>>>>>>> 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |45E
>>>>>>> AT$TSSPCSW=?...E
>>>>>>> 52R|52R|4FO|52R|0D |0A
>>>>>>> RROR..
>>>>>>> Getting firmware versions
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|52R|0D
>>>>>>> AT+CGMR.
>>>>>>> 1 "AT+CGMR"
>>>>>>> 2 "11.604.09.01.149"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x22/34
>>>>>>> 41A|54T|2B+|43C|47G|4DM|52R|0D |0D |0A |311|311|2E.|366|300|344
>>>>>>> AT+CGMR...11.604
>>>>>>> 2E.|300|399|2E.|300|311|2E.|311|344|399|0D |0A |0D |0A |4FO|4BK
>>>>>>> .09.01.149....OK
>>>>>>> 0D |0A
>>>>>>> ..
>>>>>>> Received firmware version: "11.604.09.01.149"
>>>>>>> Number version is "11,604090"
>>>>>>> [Firmware version - "11.604.09.01.149"]
>>>>>>> [Connected]
>>>>>>> Entering GSM_GetManufacturer
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D
>>>>>>> AT+CGMI.
>>>>>>> 1 "AT+CGMI"
>>>>>>> 2 "huawei"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x18/24
>>>>>>> 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i
>>>>>>> AT+CGMI...huawei
>>>>>>> 0D |0A |0D |0A |4FO|4BK|0D |0A
>>>>>>> ....OK..
>>>>>>> Manufacturer info received
>>>>>>> [Manufacturer: Huawei]
>>>>>>> Leaving GSM_GetManufacturer
>>>>>>> Manufacturer : Huawei
>>>>>>> Entering GSM_GetModel
>>>>>>> Getting model
>>>>>>> SENDING frame type 0x00/length 0x08/8
>>>>>>> 41A|54T|2B+|43C|47G|4DM|4DM|0D
>>>>>>> AT+CGMM.
>>>>>>> 1 "AT+CGMM"
>>>>>>> 2 "E156"
>>>>>>> 3 "OK"
>>>>>>> Checking line: OK
>>>>>>> AT reply state: 1
>>>>>>> RECEIVED frame type 0x00/length 0x16/22
>>>>>>> 41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|355|366|0D |0A
>>>>>>> AT+CGMM...E156..
>>>>>>> 0D |0A |4FO|4BK|0D |0A
>>>>>>> ..OK..
>>>>>>> Unknown model, but it should still work
>>>>>>> [Model name: `E156']
>>>>>>> [Model data: `']
>>>>>>> [Model data: `unknown']
>>>>>>> [Connected model - "E156"]
>>>>>>> Leaving GSM_GetModel
>>>>>>> Model : unknown (E156)
>>>>>>> [Terminating]
>>>>>>> [Closing]
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>>>>>>> traffic
>>>>>>> patterns at an interface-level. Reveals which users, apps, and
>>>>>>> protocols are
>>>>>>> consuming the most bandwidth. Provides multi-vendor support for
>>>>>>> NetFlow,
>>>>>>> J-Flow, sFlow and other flows. Make informed decisions using
>>>>>>> capacity planning
>>>>>>> reports.http://sdm.link/zohodev2dev
>>>>>>> _______________________________________________
>>>>>>> Gammu-users mailing list -
>>>>>>> https://lists.sourceforge.net/lists/listinfo/gammu-users
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> gilberto dos santos alves
>>>>>> +55(11)9-8646-5049
>>>>>> sao paulo - sp - brasil
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>>>>>> traffic
>>>>>> patterns at an interface-level. Reveals which users, apps, and
>>>>>> protocols are
>>>>>> consuming the most bandwidth. Provides multi-vendor support for
>>>>>> NetFlow,
>>>>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>>>>> planning
>>>>>> reports.http://sdm.link/zohodev2dev
>>>>>> _______________________________________________
>>>>>> Gammu-users mailing list -
>>>>>> https://lists.sourceforge.net/lists/listinfo/gammu-users
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>>>>> traffic
>>>>> patterns at an interface-level. Reveals which users, apps, and
>>>>> protocols are
>>>>> consuming the most bandwidth. Provides multi-vendor support for
>>>>> NetFlow,
>>>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>>>> planning
>>>>> reports.http://sdm.link/zohodev2dev
>>>>> _______________________________________________
>>>>> Gammu-users mailing list -
>>>>> https://lists.sourceforge.net/lists/listinfo/gammu-users
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> gilberto dos santos alves
>>>> +55(11)9-8646-5049
>>>> sao paulo - sp - brasil
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> gilberto dos santos alves
>>> +55(11)9-8646-5049
>>> sao paulo - sp - brasil
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>>> traffic
>>> patterns at an interface-level. Reveals which users, apps, and protocols
>>> are
>>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>> planning
>>> reports.http://sdm.link/zohodev2dev
>>> _______________________________________________
>>> Gammu-users mailing list -
>>> https://lists.sourceforge.net/lists/listinfo/gammu-users
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>> traffic
>> patterns at an interface-level. Reveals which users, apps, and protocols
>> are
>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>> planning
>> reports.http://sdm.link/zohodev2dev
>> _______________________________________________
>> Gammu-users mailing list -
>> https://lists.sourceforge.net/lists/listinfo/gammu-users
>>
>>
>
>
> --
> gilberto dos santos alves
> +55(11)9-8646-5049
> sao paulo - sp - brasil
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning
> reports.http://sdm.link/zohodev2dev
> _______________________________________________
> Gammu-users mailing list -
> https://lists.sourceforge.net/lists/listinfo/gammu-users
>
>
------------------------------------------------------------------------------
_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users