Re:

gilberto dos santos alves <[email protected]> Thu, 20 Oct 2016 00:28:07 -0200
Newsgroups gmane.linux.drivers.gammu
Message-ID <CAP9G-NKdxOAYZtJ9Twh8nNxQU0U8vUvum7+jsAppa+Lje4xWTA@mail.gmail.com>
please. post fragment of your log 100 lines after e before of message and
please explain what command we must search.
please publish your gammurc or gammu-smsd-config
and dmesg fragment that show how your system reconigze or undersdant
exactly your device. because there are many not authentic chips around
world and we need understand what is going on.
regards and with step by step we could help you to find what is going on.


--
gilberto dos santos alves
+55(11)9-8646-5049
sao paulo - sp - brasil





2016-10-19 18:08 GMT-02:00 Sylvain Ard <[email protected]>:

> no it doesn't works
>
> 2016-10-19 14:43 GMT+02:00 Sylvain Ard <[email protected]>:
>
>> I read this : https://github.com/sk-vpohybe/
>> stopa-monitor/wiki/3G-modem-Huawei-E169-E620-E800
>> I have not configured my Modem Dongle this may be the cause of the
>> problem ?
>> I will try it and return to you after.
>> Bye
>>
>> 2016-10-19 13:49 GMT+02:00 Sylvain Ard <[email protected]>:
>>
>>> Hi I have updated my packages with :
>>> sudo aptitude update -y
>>> sudo aptitude upgrade -y
>>> reboot
>>> but the problem is still there
>>> Have you another solution please ?
>>> Thank you !
>>> Best regards
>>>
>>> 2016-10-18 19:09 GMT+02:00 Sylvain Ard <[email protected]>:
>>>
>>>> OK I will update all my Raspian Packages and test again
>>>>
>>>> 2016-10-17 11:10 GMT+02:00 Michal Čihař <[email protected]>:
>>>>
>>>>> Hi
>>>>>
>>>>> Sylvain Ard píše v Čt 13. 10. 2016 v 11:18 +0200:
>>>>> > Hi,
>>>>> > I installed all hardware and software to send sms with a raspberry pi
>>>>> > with raspisms. But when I send an SMS with the software gammu I
>>>>> > receive an error 500 " unknown error" like this :
>>>>> > "echo "hello" | gammu sendsms TEXT tel_number If you want break,
>>>>> > press Ctrl+C... Sending SMS 1/1....waiting for network answer..error
>>>>> > 500, message reference=-1 Unknown error."
>>>>> > Can you help me please ? I am ready to type all the necessary
>>>>> > commands for a diagnostic.
>>>>>
>>>>> It can be problem with old Gammu version (especially there were some
>>>>> incompatibilities with Huawei devices if you happen to use it).
>>>>>
>>>>> As for debugging, please check https://wammu.eu/support/bugs/
>>>>>
>>>>> --
>>>>>         Michal Čihař | https://cihar.com/ | https://weblate.org/
>>>>>
>>>>> ------------------------------------------------------------
>>>>> ------------------
>>>>> Check out the vibrant tech community on one of the world's most
>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>>> _______________________________________________
>>>>> Gammu-users mailing list - https://lists.sourceforge.net/
>>>>> lists/listinfo/gammu-users
>>>>>
>>>>>
>>>>
>>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gammu-users mailing list - https://lists.sourceforge.net/
> lists/listinfo/gammu-users
>
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users