Fwd:

Sylvain Ard <[email protected]> Tue, 1 Nov 2016 12:26:38 +0100
Newsgroups gmane.linux.drivers.gammu
Message-ID <CAA86q2GSA=AOnUntdNcUtgOPjeg4xaVH5m4VySJe5fnkLPKqxg@mail.gmail.com> 
---------- Forwarded message ----------
From: Sylvain Ard <[email protected]>
Date: 2016-10-20 17:16 GMT+02:00
Subject: Re:
To: Gammu and Wammu related discussions <[email protected]>


There are the files. Is this you want ?

2016-10-20 4:28 GMT+02:00 gilberto dos santos alves <[email protected]>:

> please. post fragment of your log 100 lines after e before of message and
> please explain what command we must search.
> please publish your gammurc or gammu-smsd-config
> and dmesg fragment that show how your system reconigze or undersdant
> exactly your device. because there are many not authentic chips around
> world and we need understand what is going on.
> regards and with step by step we could help you to find what is going on.
>
>
> --
> gilberto dos santos alves
> +55(11)9-8646-5049
> sao paulo - sp - brasil
>
>
>
>
>
> 2016-10-19 18:08 GMT-02:00 Sylvain Ard <[email protected]>:
>
>> no it doesn't works
>>
>> 2016-10-19 14:43 GMT+02:00 Sylvain Ard <[email protected]>:
>>
>>> I read this : https://github.com/sk-vpohybe/
>>> stopa-monitor/wiki/3G-modem-Huawei-E169-E620-E800
>>> I have not configured my Modem Dongle this may be the cause of the
>>> problem ?
>>> I will try it and return to you after.
>>> Bye
>>>
>>> 2016-10-19 13:49 GMT+02:00 Sylvain Ard <[email protected]>:
>>>
>>>> Hi I have updated my packages with :
>>>> sudo aptitude update -y
>>>> sudo aptitude upgrade -y
>>>> reboot
>>>> but the problem is still there
>>>> Have you another solution please ?
>>>> Thank you !
>>>> Best regards
>>>>
>>>> 2016-10-18 19:09 GMT+02:00 Sylvain Ard <[email protected]>:
>>>>
>>>>> OK I will update all my Raspian Packages and test again
>>>>>
>>>>> 2016-10-17 11:10 GMT+02:00 Michal Čihař <[email protected]>:
>>>>>
>>>>>> Hi
>>>>>>
>>>>>> Sylvain Ard píše v Čt 13. 10. 2016 v 11:18 +0200:
>>>>>> > Hi,
>>>>>> > I installed all hardware and software to send sms with a raspberry
>>>>>> pi
>>>>>> > with raspisms. But when I send an SMS with the software gammu I
>>>>>> > receive an error 500 " unknown error" like this :
>>>>>> > "echo "hello" | gammu sendsms TEXT tel_number If you want break,
>>>>>> > press Ctrl+C... Sending SMS 1/1....waiting for network answer..error
>>>>>> > 500, message reference=-1 Unknown error."
>>>>>> > Can you help me please ? I am ready to type all the necessary
>>>>>> > commands for a diagnostic.
>>>>>>
>>>>>> It can be problem with old Gammu version (especially there were some
>>>>>> incompatibilities with Huawei devices if you happen to use it).
>>>>>>
>>>>>> As for debugging, please check https://wammu.eu/support/bugs/
>>>>>>
>>>>>> --
>>>>>>         Michal Čihař | https://cihar.com/ | https://weblate.org/
>>>>>>
>>>>>> ------------------------------------------------------------
>>>>>> ------------------
>>>>>> Check out the vibrant tech community on one of the world's most
>>>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>>>> _______________________________________________
>>>>>> Gammu-users mailing list - https://lists.sourceforge.net/
>>>>>> lists/listinfo/gammu-users
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gammu-users mailing list - https://lists.sourceforge.net/
>> lists/listinfo/gammu-users
>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gammu-users mailing list - https://lists.sourceforge.net/
> lists/listinfo/gammu-users
>
>

------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today. http://sdm.link/xeonphi

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users
gammu-smdrc.txt (text/plain, 1 KB) 
; Configuration file generated by gammu-detect.
; Please check The Gammu Manual for more information.

[gammu]
GammuCoding = utf8
GammuLoc = fr_FR.UTF8
device = /dev/ttyUSB0
name = Phone on USB serial port HUAWEI_Technologies HUAWEI_Mobile
connection = at
[gammu1]
GammuCoding = utf8
GammuLoc = fr_FR.UTF8
device = /dev/ttyUSB1
name = Phone on USB serial port HUAWEI_Technologies HUAWEI_Mobile
connection = at

# SMSD configuration, see gammu-smsdrc(5)
[smsd]
service = files
GammuCoding = utf8
GammuLoc = fr_FR.UTF8
device = /dev/ttyUSB1
name = Phone on USB serial port HUAWEI_Technologies HUAWEI_Mobile
connection = at

# SMSD configuration, see gammu-smsdrc(5)
[smsd]
service = files
logfile = syslog
# Increase for debugging information
debuglevel = 3
RunOnReceive = /var/www/html/RaspiSMS/parseSMS.sh
# Paths where messages are stored
inboxpath = /var/spool/gammu/inbox/
outboxpath = /var/spool/gammu/outbox/
sentsmspath = /var/spool/gammu/sent/
errorsmspath = /var/spool/gammu/error/
pin=7881
gammu.log (application/octet-stream, 25.1 KB) 
Thu 2016/10/20 16:54:17: [Gammu            - 1.33.0 built 08:46:05 Aug 14 2013 using GCC 4.6]
Thu 2016/10/20 16:54:17: [Connection       - "at19200"]
Thu 2016/10/20 16:54:17: [Connection index - 0]
Thu 2016/10/20 16:54:17: [Model type       - ""]
Thu 2016/10/20 16:54:17: [Device           - "/dev/ttyUSB0"]
Thu 2016/10/20 16:54:17: [Running on       - Linux, kernel 4.4.21-v7+ (#911 SMP Thu Sep 15 14:22:38 BST 2016)]
Thu 2016/10/20 16:54:17: Serial device: DTR is up, RTS is up, CAR is up, CTS is up
Thu 2016/10/20 16:54:17: Setting speed to 19200
Thu 2016/10/20 16:54:17: [Module           - "auto"]
Thu 2016/10/20 16:54:17: Escaping SMS mode
Thu 2016/10/20 16:54:17: SENDING frametype 0x00/length 0x02/2
Thu 2016/10/20 16:54:17: 1B |0D                                                          ..              
Thu 2016/10/20 16:54:18: Sending simple AT command to wake up some devices
Thu 2016/10/20 16:54:18: SENDING frametype 0x00/length 0x03/3
Thu 2016/10/20 16:54:18: 41A|54T|0D                                                      AT.             
Thu 2016/10/20 16:54:18: 1 "AT"
Thu 2016/10/20 16:54:18: 2 "OK"
Thu 2016/10/20 16:54:18: Checking line: OK
Thu 2016/10/20 16:54:18: AT reply state: 1
Thu 2016/10/20 16:54:18: RECEIVED frametype 0x00/length 0x09/9
Thu 2016/10/20 16:54:18: 41A|54T|0D |0D |0A |4FO|4BK|0D |0A                              AT...OK..       
Thu 2016/10/20 16:54:19: Enabling echo
Thu 2016/10/20 16:54:19: SENDING frametype 0x00/length 0x05/5
Thu 2016/10/20 16:54:19: 41A|54T|45E|311|0D                                              ATE1.           
Thu 2016/10/20 16:54:19: 1 "ATE1"
Thu 2016/10/20 16:54:19: 2 "OK"
Thu 2016/10/20 16:54:19: Checking line: OK
Thu 2016/10/20 16:54:19: AT reply state: 1
Thu 2016/10/20 16:54:19: RECEIVED frametype 0x00/length 0x0B/11
Thu 2016/10/20 16:54:19: 41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A                      ATE1...OK..     
Thu 2016/10/20 16:54:19: Trying Motorola mode switch
Thu 2016/10/20 16:54:19: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:19: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D                          AT+MODE=2.      
Thu 2016/10/20 16:54:19: 1 "AT+MODE=2"
Thu 2016/10/20 16:54:19: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:19: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:19: AT reply state: 3
Thu 2016/10/20 16:54:19: RECEIVED frametype 0x00/length 0x21/33
Thu 2016/10/20 16:54:19: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |43C|4FO|4DM|4DM AT+MODE=2...COMM
Thu 2016/10/20 16:54:19: 41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T|0D  AND NOT SUPPORT.
Thu 2016/10/20 16:54:19: 0A                                                              .               
Thu 2016/10/20 16:54:19: Seems not to be supported
Thu 2016/10/20 16:54:19: Enabling CME errors
Thu 2016/10/20 16:54:19: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:19: 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D                          AT+CMEE=1.      
Thu 2016/10/20 16:54:20: 1 "AT+CMEE=1"
Thu 2016/10/20 16:54:20: 2 "OK"
Thu 2016/10/20 16:54:20: Checking line: OK
Thu 2016/10/20 16:54:20: AT reply state: 1
Thu 2016/10/20 16:54:20: RECEIVED frametype 0x00/length 0x10/16
Thu 2016/10/20 16:54:20: 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A  AT+CMEE=1...OK..
Thu 2016/10/20 16:54:20: SENDING frametype 0x00/length 0x09/9
Thu 2016/10/20 16:54:20: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D                              AT+CSCS?.       
Thu 2016/10/20 16:54:20: 1 "AT+CSCS?"
Thu 2016/10/20 16:54:20: 2 "+CSCS: "IRA""
Thu 2016/10/20 16:54:20: 3 "OK"
Thu 2016/10/20 16:54:20: Checking line: OK
Thu 2016/10/20 16:54:20: AT reply state: 1
Thu 2016/10/20 16:54:20: RECEIVED frametype 0x00/length 0x1F/31
Thu 2016/10/20 16:54:20: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
Thu 2016/10/20 16:54:20: 3A:|20 |22"|49I|52R|41A|22"|0D |0A |0D |0A |4FO|4BK|0D |0A      : "IRA"....OK.. 
Thu 2016/10/20 16:54:20: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:20: 41A|54T|2B+|43C|47G|4DM|49I|0D                                  AT+CGMI.        
Thu 2016/10/20 16:54:21: 1 "AT+CGMI"
Thu 2016/10/20 16:54:21: 2 "huawei"
Thu 2016/10/20 16:54:21: 3 "OK"
Thu 2016/10/20 16:54:21: Checking line: OK
Thu 2016/10/20 16:54:21: AT reply state: 1
Thu 2016/10/20 16:54:21: RECEIVED frametype 0x00/length 0x18/24
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i AT+CGMI...huawei
Thu 2016/10/20 16:54:21: 0D |0A |0D |0A |4FO|4BK|0D |0A                                  ....OK..        
Thu 2016/10/20 16:54:21: Manufacturer info received
Thu 2016/10/20 16:54:21: [Manufacturer: Huawei]
Thu 2016/10/20 16:54:21: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D                          AT+CSCS=?.      
Thu 2016/10/20 16:54:21: 1 "AT+CSCS=?"
Thu 2016/10/20 16:54:21: 2 "+CSCS: ("IRA","GSM","UCS2")"
Thu 2016/10/20 16:54:21: 3 "OK"
Thu 2016/10/20 16:54:21: Checking line: OK
Thu 2016/10/20 16:54:21: AT reply state: 1
Thu 2016/10/20 16:54:21: RECEIVED frametype 0x00/length 0x2F/47
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C AT+CSCS=?...+CSC
Thu 2016/10/20 16:54:21: 53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S: ("IRA","GSM",
Thu 2016/10/20 16:54:21: 22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A      "UCS2")....OK.. 
Thu 2016/10/20 16:54:21: Chosen GSM as normal charset
Thu 2016/10/20 16:54:21: Chosen UCS2 as unicode charset
Thu 2016/10/20 16:54:21: SENDING frametype 0x00/length 0x0E/14
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D          AT+CSCS="GSM".  
Thu 2016/10/20 16:54:21: 1 "AT+CSCS="GSM""
Thu 2016/10/20 16:54:21: 2 "OK"
Thu 2016/10/20 16:54:21: Checking line: OK
Thu 2016/10/20 16:54:21: AT reply state: 1
Thu 2016/10/20 16:54:21: RECEIVED frametype 0x00/length 0x14/20
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D |0D |0A  AT+CSCS="GSM"...
Thu 2016/10/20 16:54:21: 4FO|4BK|0D |0A                                                  OK..            
Thu 2016/10/20 16:54:21: SENDING frametype 0x00/length 0x09/9
Thu 2016/10/20 16:54:21: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D                              AT+CSCS?.       
Thu 2016/10/20 16:54:22: 1 "AT+CSCS?"
Thu 2016/10/20 16:54:22: 2 "+CSCS: "GSM""
Thu 2016/10/20 16:54:22: 3 "OK"
Thu 2016/10/20 16:54:22: Checking line: OK
Thu 2016/10/20 16:54:22: AT reply state: 1
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x1F/31
Thu 2016/10/20 16:54:22: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
Thu 2016/10/20 16:54:22: 3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A      : "GSM"....OK.. 
Thu 2016/10/20 16:54:22: Getting model
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:22: 41A|54T|2B+|43C|47G|4DM|4DM|0D                                  AT+CGMM.        
Thu 2016/10/20 16:54:22: 1 "AT+CGMM"
Thu 2016/10/20 16:54:22: 2 "E169"
Thu 2016/10/20 16:54:22: 3 "OK"
Thu 2016/10/20 16:54:22: Checking line: OK
Thu 2016/10/20 16:54:22: AT reply state: 1
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x16/22
Thu 2016/10/20 16:54:22: 41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|366|399|0D |0A  AT+CGMM...E169..
Thu 2016/10/20 16:54:22: 0D |0A |4FO|4BK|0D |0A                                          ..OK..          
Thu 2016/10/20 16:54:22: [Model name: `E169']
Thu 2016/10/20 16:54:22: [Model data: `E169']
Thu 2016/10/20 16:54:22: [Model data: `E169']
Thu 2016/10/20 16:54:22: [Connected model  - "E169"]
Thu 2016/10/20 16:54:22: Checking for OBEX support
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x0B/11
Thu 2016/10/20 16:54:22: 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D                      AT+CPROT=?.     
Thu 2016/10/20 16:54:22: 1 "AT+CPROT=?"
Thu 2016/10/20 16:54:22: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:22: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:22: AT reply state: 3
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x22/34
Thu 2016/10/20 16:54:22: 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |43C|4FO|4DM AT+CPROT=?...COM
Thu 2016/10/20 16:54:22: 4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T MAND NOT SUPPORT
Thu 2016/10/20 16:54:22: 0D |0A                                                          ..              
Thu 2016/10/20 16:54:22: Checking for SYNCML/OBEX support
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x0C/12
Thu 2016/10/20 16:54:22: 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D                  AT+SYNCML=?.    
Thu 2016/10/20 16:54:22: 1 "AT+SYNCML=?"
Thu 2016/10/20 16:54:22: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:22: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:22: AT reply state: 3
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x23/35
Thu 2016/10/20 16:54:22: 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |43C|4FO AT+SYNCML=?...CO
Thu 2016/10/20 16:54:22: 4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R MMAND NOT SUPPOR
Thu 2016/10/20 16:54:22: 54T|0D |0A                                                      T..             
Thu 2016/10/20 16:54:22: Checking for SYNCML/OBEX support
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x0D/13
Thu 2016/10/20 16:54:22: 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D              AT$TSSPCSW=?.   
Thu 2016/10/20 16:54:22: 1 "AT$TSSPCSW=?"
Thu 2016/10/20 16:54:22: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:22: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:22: AT reply state: 3
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x24/36
Thu 2016/10/20 16:54:22: 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |43C AT$TSSPCSW=?...C
Thu 2016/10/20 16:54:22: 4FO|4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO OMMAND NOT SUPPO
Thu 2016/10/20 16:54:22: 52R|54T|0D |0A                                                  RT..            
Thu 2016/10/20 16:54:22: [Module           - "A2D|iPAQ|at|M20|S25|MC35|TC35|C35i|S65|S300|5110|5130|5190|5210|6110|6130|6150|6190|6210|6250|6310|6310i|6510|7110|8210|8250|8290|8310|8390|8850|8855|8890|8910|9110|9210"]
Thu 2016/10/20 16:54:22: Escaping SMS mode
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x02/2
Thu 2016/10/20 16:54:22: 1B |0D                                                          ..              
Thu 2016/10/20 16:54:22: Sending simple AT command to wake up some devices
Thu 2016/10/20 16:54:22: SENDING frametype 0x00/length 0x03/3
Thu 2016/10/20 16:54:22: 41A|54T|0D                                                      AT.             
Thu 2016/10/20 16:54:22: 1 "AT"
Thu 2016/10/20 16:54:22: 2 "OK"
Thu 2016/10/20 16:54:22: Checking line: OK
Thu 2016/10/20 16:54:22: AT reply state: 1
Thu 2016/10/20 16:54:22: RECEIVED frametype 0x00/length 0x09/9
Thu 2016/10/20 16:54:22: 41A|54T|0D |0D |0A |4FO|4BK|0D |0A                              AT...OK..       
Thu 2016/10/20 16:54:23: Enabling echo
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x05/5
Thu 2016/10/20 16:54:23: 41A|54T|45E|311|0D                                              ATE1.           
Thu 2016/10/20 16:54:23: 1 "ATE1"
Thu 2016/10/20 16:54:23: 2 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x0B/11
Thu 2016/10/20 16:54:23: 41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A                      ATE1...OK..     
Thu 2016/10/20 16:54:23: Trying Motorola mode switch
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:23: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D                          AT+MODE=2.      
Thu 2016/10/20 16:54:23: 1 "AT+MODE=2"
Thu 2016/10/20 16:54:23: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:23: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:23: AT reply state: 3
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x21/33
Thu 2016/10/20 16:54:23: 41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |43C|4FO|4DM|4DM AT+MODE=2...COMM
Thu 2016/10/20 16:54:23: 41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T|0D  AND NOT SUPPORT.
Thu 2016/10/20 16:54:23: 0A                                                              .               
Thu 2016/10/20 16:54:23: Seems not to be supported
Thu 2016/10/20 16:54:23: Enabling CME errors
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D                          AT+CMEE=1.      
Thu 2016/10/20 16:54:23: 1 "AT+CMEE=1"
Thu 2016/10/20 16:54:23: 2 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x10/16
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A  AT+CMEE=1...OK..
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x09/9
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D                              AT+CSCS?.       
Thu 2016/10/20 16:54:23: 1 "AT+CSCS?"
Thu 2016/10/20 16:54:23: 2 "+CSCS: "GSM""
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x1F/31
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
Thu 2016/10/20 16:54:23: 3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A      : "GSM"....OK.. 
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|49I|0D                                  AT+CGMI.        
Thu 2016/10/20 16:54:23: 1 "AT+CGMI"
Thu 2016/10/20 16:54:23: 2 "huawei"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x18/24
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i AT+CGMI...huawei
Thu 2016/10/20 16:54:23: 0D |0A |0D |0A |4FO|4BK|0D |0A                                  ....OK..        
Thu 2016/10/20 16:54:23: Manufacturer info received
Thu 2016/10/20 16:54:23: [Manufacturer: Huawei]
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0A/10
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D                          AT+CSCS=?.      
Thu 2016/10/20 16:54:23: 1 "AT+CSCS=?"
Thu 2016/10/20 16:54:23: 2 "+CSCS: ("IRA","GSM","UCS2")"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x2F/47
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C AT+CSCS=?...+CSC
Thu 2016/10/20 16:54:23: 53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S: ("IRA","GSM",
Thu 2016/10/20 16:54:23: 22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A      "UCS2")....OK.. 
Thu 2016/10/20 16:54:23: Chosen GSM as normal charset
Thu 2016/10/20 16:54:23: Chosen UCS2 as unicode charset
Thu 2016/10/20 16:54:23: Checking for OBEX support
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0B/11
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D                      AT+CPROT=?.     
Thu 2016/10/20 16:54:23: 1 "AT+CPROT=?"
Thu 2016/10/20 16:54:23: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:23: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:23: AT reply state: 3
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x22/34
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |43C|4FO|4DM AT+CPROT=?...COM
Thu 2016/10/20 16:54:23: 4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T MAND NOT SUPPORT
Thu 2016/10/20 16:54:23: 0D |0A                                                          ..              
Thu 2016/10/20 16:54:23: Checking for SYNCML/OBEX support
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0C/12
Thu 2016/10/20 16:54:23: 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D                  AT+SYNCML=?.    
Thu 2016/10/20 16:54:23: 1 "AT+SYNCML=?"
Thu 2016/10/20 16:54:23: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:23: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:23: AT reply state: 3
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x23/35
Thu 2016/10/20 16:54:23: 41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |43C|4FO AT+SYNCML=?...CO
Thu 2016/10/20 16:54:23: 4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R MMAND NOT SUPPOR
Thu 2016/10/20 16:54:23: 54T|0D |0A                                                      T..             
Thu 2016/10/20 16:54:23: Checking for SYNCML/OBEX support
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x0D/13
Thu 2016/10/20 16:54:23: 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D              AT$TSSPCSW=?.   
Thu 2016/10/20 16:54:23: 1 "AT$TSSPCSW=?"
Thu 2016/10/20 16:54:23: 2 "COMMAND NOT SUPPORT"
Thu 2016/10/20 16:54:23: Checking line: COMMAND NOT SUPPORT
Thu 2016/10/20 16:54:23: AT reply state: 3
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x24/36
Thu 2016/10/20 16:54:23: 41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |43C AT$TSSPCSW=?...C
Thu 2016/10/20 16:54:23: 4FO|4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO OMMAND NOT SUPPO
Thu 2016/10/20 16:54:23: 52R|54T|0D |0A                                                  RT..            
Thu 2016/10/20 16:54:23: Setting date & time
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x21/33
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|43C|4CL|4BK|3D=|22"|322|300|311|366|2F/|311|300 AT+CCLK="2016/10
Thu 2016/10/20 16:54:23: 2F/|322|300|2C,|311|366|3A:|355|344|3A:|322|333|2B+|300|300|22" /20,16:54:23+00"
Thu 2016/10/20 16:54:23: 0D                                                              .               
Thu 2016/10/20 16:54:23: 1 "AT+CCLK="2016/10/20,16:54:23+00""
Thu 2016/10/20 16:54:23: 2 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x27/39
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|43C|4CL|4BK|3D=|22"|322|300|311|366|2F/|311|300 AT+CCLK="2016/10
Thu 2016/10/20 16:54:23: 2F/|322|300|2C,|311|366|3A:|355|344|3A:|322|333|2B+|300|300|22" /20,16:54:23+00"
Thu 2016/10/20 16:54:23: 0D |0D |0A |4FO|4BK|0D |0A                                      ...OK..         
Thu 2016/10/20 16:54:23: Getting firmware versions
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|52R|0D                                  AT+CGMR.        
Thu 2016/10/20 16:54:23: 1 "AT+CGMR"
Thu 2016/10/20 16:54:23: 2 "11.314.13.51.156"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x22/34
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|52R|0D |0D |0A |311|311|2E.|333|311|344 AT+CGMR...11.314
Thu 2016/10/20 16:54:23: 2E.|311|333|2E.|355|311|2E.|311|355|366|0D |0A |0D |0A |4FO|4BK .13.51.156....OK
Thu 2016/10/20 16:54:23: 0D |0A                                                          ..              
Thu 2016/10/20 16:54:23: Received firmware version: "11.314.13.51.156"
Thu 2016/10/20 16:54:23: Number version is "11,314135"
Thu 2016/10/20 16:54:23: [Firmware version - "11.314.13.51.156"]
Thu 2016/10/20 16:54:23: [Connected]
Thu 2016/10/20 16:54:23: Entering GSM_GetManufacturer
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|49I|0D                                  AT+CGMI.        
Thu 2016/10/20 16:54:23: 1 "AT+CGMI"
Thu 2016/10/20 16:54:23: 2 "huawei"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x18/24
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i AT+CGMI...huawei
Thu 2016/10/20 16:54:23: 0D |0A |0D |0A |4FO|4BK|0D |0A                                  ....OK..        
Thu 2016/10/20 16:54:23: Manufacturer info received
Thu 2016/10/20 16:54:23: [Manufacturer: Huawei]
Thu 2016/10/20 16:54:23: Leaving GSM_GetManufacturer
Thu 2016/10/20 16:54:23: Entering GSM_GetModel
Thu 2016/10/20 16:54:23: Getting model
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|4DM|0D                                  AT+CGMM.        
Thu 2016/10/20 16:54:23: 1 "AT+CGMM"
Thu 2016/10/20 16:54:23: 2 "E169"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x16/22
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|366|399|0D |0A  AT+CGMM...E169..
Thu 2016/10/20 16:54:23: 0D |0A |4FO|4BK|0D |0A                                          ..OK..          
Thu 2016/10/20 16:54:23: [Model name: `E169']
Thu 2016/10/20 16:54:23: [Model data: `E169']
Thu 2016/10/20 16:54:23: [Model data: `E169']
Thu 2016/10/20 16:54:23: [Connected model  - "E169"]
Thu 2016/10/20 16:54:23: Leaving GSM_GetModel
Thu 2016/10/20 16:54:23: Entering GSM_GetFirmware
Thu 2016/10/20 16:54:23: Getting firmware versions
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|52R|0D                                  AT+CGMR.        
Thu 2016/10/20 16:54:23: 1 "AT+CGMR"
Thu 2016/10/20 16:54:23: 2 "11.314.13.51.156"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x22/34
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|4DM|52R|0D |0D |0A |311|311|2E.|333|311|344 AT+CGMR...11.314
Thu 2016/10/20 16:54:23: 2E.|311|333|2E.|355|311|2E.|311|355|366|0D |0A |0D |0A |4FO|4BK .13.51.156....OK
Thu 2016/10/20 16:54:23: 0D |0A                                                          ..              
Thu 2016/10/20 16:54:23: Received firmware version: "11.314.13.51.156"
Thu 2016/10/20 16:54:23: Number version is "11,314135"
Thu 2016/10/20 16:54:23: [Firmware version - "11.314.13.51.156"]
Thu 2016/10/20 16:54:23: Leaving GSM_GetFirmware
Thu 2016/10/20 16:54:23: Entering GSM_GetPPM
Thu 2016/10/20 16:54:23: GSM_GetPPM failed with error NOTSUPPORTED[21]: Fonctionnalités non supportées par votre téléphone.
Thu 2016/10/20 16:54:23: Leaving GSM_GetPPM
Thu 2016/10/20 16:54:23: Entering GSM_GetHardware
Thu 2016/10/20 16:54:23: GSM_GetHardware failed with error NOTSUPPORTED[21]: Fonctionnalités non supportées par votre téléphone.
Thu 2016/10/20 16:54:23: Leaving GSM_GetHardware
Thu 2016/10/20 16:54:23: Entering GSM_GetIMEI
Thu 2016/10/20 16:54:23: Getting IMEI
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|53S|4EN|0D                                  AT+CGSN.        
Thu 2016/10/20 16:54:23: 1 "AT+CGSN"
Thu 2016/10/20 16:54:23: 2 "359638018980742"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x21/33
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|47G|53S|4EN|0D |0D |0A |333|355|399|366|333|388 AT+CGSN...359638
Thu 2016/10/20 16:54:23: 300|311|388|399|388|300|377|344|322|0D |0A |0D |0A |4FO|4BK|0D  018980742....OK.
Thu 2016/10/20 16:54:23: 0A                                                              .               
Thu 2016/10/20 16:54:23: Received IMEI 359638018980742
Thu 2016/10/20 16:54:23: Leaving GSM_GetIMEI
Thu 2016/10/20 16:54:23: Entering GSM_GetOriginalIMEI
Thu 2016/10/20 16:54:23: GSM_GetOriginalIMEI failed with error NOTSUPPORTED[21]: Fonctionnalités non supportées par votre téléphone.
Thu 2016/10/20 16:54:23: Leaving GSM_GetOriginalIMEI
Thu 2016/10/20 16:54:23: Entering GSM_GetManufactureMonth
Thu 2016/10/20 16:54:23: GSM_GetManufactureMonth failed with error NOTSUPPORTED[21]: Fonctionnalités non supportées par votre téléphone.
Thu 2016/10/20 16:54:23: Leaving GSM_GetManufactureMonth
Thu 2016/10/20 16:54:23: Entering GSM_GetProductCode
Thu 2016/10/20 16:54:23: GSM_GetProductCode failed with error NOTSUPPORTED[21]: Fonctionnalités non supportées par votre téléphone.
Thu 2016/10/20 16:54:23: Leaving GSM_GetProductCode
Thu 2016/10/20 16:54:23: Entering GSM_GetSIMIMSI
Thu 2016/10/20 16:54:23: Getting SIM IMSI
Thu 2016/10/20 16:54:23: SENDING frametype 0x00/length 0x08/8
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|49I|4DM|49I|0D                                  AT+CIMI.        
Thu 2016/10/20 16:54:23: 1 "AT+CIMI"
Thu 2016/10/20 16:54:23: 2 "208150009082056"
Thu 2016/10/20 16:54:23: 3 "OK"
Thu 2016/10/20 16:54:23: Checking line: OK
Thu 2016/10/20 16:54:23: AT reply state: 1
Thu 2016/10/20 16:54:23: RECEIVED frametype 0x00/length 0x21/33
Thu 2016/10/20 16:54:23: 41A|54T|2B+|43C|49I|4DM|49I|0D |0D |0A |322|300|388|311|355|300 AT+CIMI...208150
Thu 2016/10/20 16:54:23: 300|300|399|300|388|322|300|355|366|0D |0A |0D |0A |4FO|4BK|0D  009082056....OK.
Thu 2016/10/20 16:54:23: 0A                                                              .               
Thu 2016/10/20 16:54:23: Received IMSI 208150009082056
Thu 2016/10/20 16:54:23: Leaving GSM_GetSIMIMSI
Thu 2016/10/20 16:54:23: [Terminating]
Thu 2016/10/20 16:54:23: [Closing]
dmseg.txt (text/plain, 27.5 KB) 
pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.21-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #911 SMP Thu Sep 15 14:22:38 BST 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 808c2f40, node_mem_map b9fa6000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b9f62000 s22592 r8192 d22464 u53248
[    0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa02082 bcm2709.serial=0xb64c8012 smsc95xx.macaddr=B8:27:EB:4C:80:12 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 939072K/966656K available (6348K kernel code, 432K rwdata, 1716K rodata, 476K init, 764K bss, 19392K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x807e854c   (8066 kB)
      .init : 0x807e9000 - 0x80860000   ( 476 kB)
      .data : 0x80860000 - 0x808cc250   ( 433 kB)
       .bss : 0x808cf000 - 0x8098e1ec   ( 765 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000026] Switching to timer-based delay loop, resolution 52ns
[    0.000285] Console: colour dummy device 80x30
[    0.001337] console [tty1] enabled
[    0.001381] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001450] pid_max: default: 32768 minimum: 301
[    0.001786] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001828] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002775] Disabling cpuset control group subsystem
[    0.002830] Initializing cgroup subsys io
[    0.002881] Initializing cgroup subsys memory
[    0.002947] Initializing cgroup subsys devices
[    0.002989] Initializing cgroup subsys freezer
[    0.003030] Initializing cgroup subsys net_cls
[    0.003098] CPU: Testing write buffer coherency: ok
[    0.003185] ftrace: allocating 21220 entries in 63 pages
[    0.053027] CPU0: update cpu_capacity 1024
[    0.053094] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.053128] [bcm2709_smp_prepare_cpus] enter
[    0.053287] Setting up static identity map for 0x8240 - 0x8274
[    0.054927] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.055144] [bcm2709_secondary_init] enter cpu:1
[    0.055188] CPU1: update cpu_capacity 1024
[    0.055194] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.055566] [bcm2709_boot_secondary] cpu:2 started (0) 18
[    0.055730] [bcm2709_secondary_init] enter cpu:2
[    0.055751] CPU2: update cpu_capacity 1024
[    0.055757] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.056115] [bcm2709_boot_secondary] cpu:3 started (0) 16
[    0.056245] [bcm2709_secondary_init] enter cpu:3
[    0.056265] CPU3: update cpu_capacity 1024
[    0.056271] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.056330] Brought up 4 CPUs
[    0.056428] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.056457] CPU: All CPU(s) started in HYP mode.
[    0.056483] CPU: Virtualization extensions available.
[    0.057120] devtmpfs: initialized
[    0.068148] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.068509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.069259] pinctrl core: initialized pinctrl subsystem
[    0.069793] NET: Registered protocol family 16
[    0.074954] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.082109] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.082157] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.082333] Serial: AMBA PL011 UART driver
[    0.082515] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.082719] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.145183] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.145783] SCSI subsystem initialized
[    0.145985] usbcore: registered new interface driver usbfs
[    0.146096] usbcore: registered new interface driver hub
[    0.146218] usbcore: registered new device driver usb
[    0.152582] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-09-21 13:13
[    0.179696] clocksource: Switched to clocksource arch_sys_counter
[    0.224353] FS-Cache: Loaded
[    0.224648] CacheFiles: Loaded
[    0.236893] NET: Registered protocol family 2
[    0.237760] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.237898] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.238108] TCP: Hash tables configured (established 8192 bind 8192)
[    0.238224] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.238291] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.238540] NET: Registered protocol family 1
[    0.238875] RPC: Registered named UNIX socket transport module.
[    0.238906] RPC: Registered udp transport module.
[    0.238934] RPC: Registered tcp transport module.
[    0.238961] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.240077] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.241420] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.254689] VFS: Disk quotas dquot_6.6.0
[    0.255015] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.257222] FS-Cache: Netfs 'nfs' registered for caching
[    0.258139] NFS: Registering the id_resolver key type
[    0.258201] Key type id_resolver registered
[    0.258229] Key type id_legacy registered
[    0.260583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.260755] io scheduler noop registered
[    0.260796] io scheduler deadline registered (default)
[    0.260870] io scheduler cfq registered
[    0.263428] BCM2708FB: allocated DMA memory fac00000
[    0.263475] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.275173] Console: switching to colour frame buffer device 100x30
[    1.164114] bcm2835-rng 3f104000.rng: hwrng registered
[    1.167046] vc-cma: Videocore CMA driver
[    1.169812] vc-cma: vc_cma_base      = 0x00000000
[    1.172514] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.175174] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.178019] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.195533] brd: module loaded
[    1.206870] loop: module loaded
[    1.210538] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0
[    1.214744] Loading iSCSI transport class v2.0-870.
[    1.218094] usbcore: registered new interface driver smsc95xx
[    1.220897] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.423855] Core Release: 2.80a
[    1.426486] Setting default values for core params
[    1.429162] Finished setting default values for core params
[    1.632224] Using Buffer DMA mode
[    1.634919] Periodic Transfer Interrupt Enhancement - disabled
[    1.637643] Multiprocessor Interrupt Enhancement - disabled
[    1.640333] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.643005] Dedicated Tx FIFOs mode
[    1.645945] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024
[    1.651686] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    1.665931] dwc_otg: Microframe scheduler enabled
[    1.665986] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80447364
[    1.668948] WARN::hcd_init_fiq:414: FIQ ASM at 0x804476d4 length 36
[    1.671948] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb9f8000
[    1.674906] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.677762] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.680742] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.683634] Init: Port Power? op_state=1
[    1.686410] Init: Power Port (0)
[    1.689305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.692152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.694972] usb usb1: Product: DWC OTG Controller
[    1.697761] usb usb1: Manufacturer: Linux 4.4.21-v7+ dwc_otg_hcd
[    1.700591] usb usb1: SerialNumber: 3f980000.usb
[    1.704145] hub 1-0:1.0: USB hub found
[    1.706892] hub 1-0:1.0: 1 port detected
[    1.710139] dwc_otg: FIQ enabled
[    1.710148] dwc_otg: NAK holdoff enabled
[    1.710156] dwc_otg: FIQ split-transaction FSM enabled
[    1.710195] Module dwc_common_port init
[    1.710464] usbcore: registered new interface driver usb-storage
[    1.713442] mousedev: PS/2 mouse device common for all mice
[    1.716907] bcm2835-cpufreq: min=600000 max=1200000
[    1.719858] sdhci: Secure Digital Host Controller Interface driver
[    1.722461] sdhci: Copyright(c) Pierre Ossman
[    1.725332] sdhost: log_buf @ bac13000 (fac13000)
[    1.779724] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.784627] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.787329] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.839808] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.842850] ledtrig-cpu: registered to indicate activity on CPUs
[    1.845674] hidraw: raw HID events driver (C) Jiri Kosina
[    1.848586] usbcore: registered new interface driver usbhid
[    1.851333] usbhid: USB HID core driver
[    1.854544] Initializing XFRM netlink socket
[    1.857250] NET: Registered protocol family 17
[    1.860045] Key type dns_resolver registered
[    1.863214] Registering SWP/SWPB emulation handler
[    1.866667] registered taskstats version 1
[    1.869444] vc-sm: Videocore shared memory driver
[    1.872062] [vc_sm_connected_init]: start
[    1.875075] [vc_sm_connected_init]: end - returning 0
[    1.879980] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.881309] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.883709] mmc0: new high speed SDHC card at address aaaa
[    1.884271] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
[    1.891546] of_cfs_init
[    1.892830]  mmcblk0: p1 p2
[    1.896917] of_cfs_init: OK
[    1.905721] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    1.908462] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    1.910727] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.912272] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.913815] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.916584] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.921748] Indeed it is in host mode hprt0 = 00021501
[    2.007090] mmc1: new high speed SDIO card at address 0001
[    2.099730] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.102402] Indeed it is in host mode hprt0 = 00001101
[    2.254901] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    2.258108] EXT4-fs (mmcblk0p2): 9 orphan inodes deleted
[    2.260705] EXT4-fs (mmcblk0p2): recovery complete
[    2.292265] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.294953] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.298343] devtmpfs: mounted
[    2.299992] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.300001] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.306993] hub 1-1:1.0: USB hub found
[    2.307335] Freeing unused kernel memory: 476K (807e9000 - 80860000)
[    2.312365] hub 1-1:1.0: 5 ports detected
[    2.564114] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
[    2.573472] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.580115] systemd[1]: Detected architecture 'arm'.
[    2.589792] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.690049] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.693608] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.712365] smsc95xx v1.0.4
[    2.718106] NET: Registered protocol family 10
[    2.722875] systemd[1]: Inserted module 'ipv6'
[    2.731282] systemd[1]: Set hostname to <raspberrypi>.
[    2.773241] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4c:80:12
[    2.879611] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 79 bits of entropy available)
[    3.021899] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.030925] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.040391] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.066193] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.075220] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.083670] random: systemd: uninitialized urandom read (16 bytes read, 81 bits of entropy available)
[    3.129324] random: systemd: uninitialized urandom read (16 bytes read, 82 bits of entropy available)
[    3.138432] random: systemd: uninitialized urandom read (16 bytes read, 82 bits of entropy available)
[    3.259773] usb 1-1.5: new low-speed USB device number 4 using dwc_otg
[    3.281075] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.286253] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.291241] systemd[1]: Starting Remote File Systems (Pre).
[    3.301409] systemd[1]: Reached target Remote File Systems (Pre).
[    3.306271] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.316553] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.325905] systemd[1]: Starting Encrypted Volumes.
[    3.335288] systemd[1]: Reached target Encrypted Volumes.
[    3.339796] systemd[1]: Starting Swap.
[    3.348463] systemd[1]: Reached target Swap.
[    3.352605] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    3.360798] systemd[1]: Starting Root Slice.
[    3.368607] systemd[1]: Created slice Root Slice.
[    3.372282] systemd[1]: Starting User and Session Slice.
[    3.379628] systemd[1]: Created slice User and Session Slice.
[    3.383065] systemd[1]: Starting Delayed Shutdown Socket.
[    3.390057] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.393367] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.400179] usb 1-1.5: New USB device found, idVendor=0c40, idProduct=8000
[    3.400189] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.400195] usb 1-1.5: Product: 2.4GHz receiver
[    3.400202] usb 1-1.5: Manufacturer: ELMCU
[    3.413106] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.416148] systemd[1]: Starting Journal Socket (/dev/log).
[    3.419861] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:0C40:8000.0001/input/input0
[    3.429059] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.432454] systemd[1]: Starting udev Control Socket.
[    3.439332] systemd[1]: Listening on udev Control Socket.
[    3.442679] systemd[1]: Starting udev Kernel Socket.
[    3.449470] systemd[1]: Listening on udev Kernel Socket.
[    3.452855] systemd[1]: Starting Journal Socket.
[    3.459774] systemd[1]: Listening on Journal Socket.
[    3.463126] systemd[1]: Starting System Slice.
[    3.470014] systemd[1]: Created slice System Slice.
[    3.473258] systemd[1]: Starting File System Check on Root Device...
[    3.480837] hid-generic 0003:0C40:8000.0001: input,hidraw0: USB HID v1.11 Keyboard [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.5/input0
[    3.505969] input: ELMCU 2.4GHz receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:0C40:8000.0002/input/input1
[    3.510422] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    3.520634] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.524367] systemd[1]: Starting system-getty.slice.
[    3.532027] systemd[1]: Created slice system-getty.slice.
[    3.535753] systemd[1]: Starting Increase datagram queue length...
[    3.546092] systemd[1]: Starting Restore / save the current clock...
[    3.558039] systemd[1]: Starting udev Coldplug all Devices...
[    3.570317] hid-generic 0003:0C40:8000.0002: input,hidraw1: USB HID v1.11 Mouse [ELMCU 2.4GHz receiver] on usb-3f980000.usb-1.5/input1
[    3.620235] systemd[1]: Starting Load Kernel Modules...
[    3.631415] systemd[1]: Mounting Debug File System...
[    3.643144] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.658458] systemd[1]: Mounted Huge Pages File System.
[    3.690814] systemd[1]: Started Set Up Additional Binary Formats.
[    3.695121] systemd[1]: Mounting POSIX Message Queue File System...
[    3.705611] systemd[1]: Starting Slices.
[    3.716285] systemd[1]: Reached target Slices.
[    3.727482] systemd[1]: Mounted POSIX Message Queue File System.
[    3.735444] fuse init (API version 7.23)
[    3.744318] systemd[1]: Mounted Debug File System.
[    3.753341] systemd[1]: Started Increase datagram queue length.
[    3.778752] i2c /dev entries driver
[    3.786113] systemd[1]: Started Restore / save the current clock.
[    3.825436] systemd[1]: Started Load Kernel Modules.
[    3.834551] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.854428] systemd[1]: Time has been changed
[    3.880565] systemd[1]: Started udev Coldplug all Devices.
[    3.900020] systemd[1]: Started File System Check on Root Device.
[    4.016952] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.050328] systemd[1]: Starting Apply Kernel Variables...
[    4.060398] systemd[1]: Mounting Configuration File System...
[    4.070959] systemd[1]: Mounting FUSE Control File System...
[    4.081833] systemd[1]: Starting Syslog Socket.
[    4.086350] systemd[1]: Listening on Syslog Socket.
[    4.086542] systemd[1]: Starting Journal Service...
[    4.098039] systemd[1]: Started Journal Service.
[    4.275772] systemd-udevd[139]: starting version 215
[    4.634839] rpi-ft5406 rpi_ft5406: Probing device
[    4.635940] input: FT5406 memory based driver as /devices/virtual/input/input2
[    4.890529] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    4.890935] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    4.986019] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.189158] usbcore: registered new interface driver brcmfmac
[    5.311328] random: nonblocking pool is initialized
[    5.337217] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    5.357718] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    5.414973] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[    5.415006] cfg80211: World regulatory domain updated:
[    5.415015] cfg80211:  DFS Master region: unset
[    5.415025] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.415039] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.415052] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.415064] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.415078] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.415092] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.415105] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.415117] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.415129] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    5.679036] systemd-journald[137]: Received request to flush runtime journal from PID 1
[    6.532952] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[    6.532971] brcmfmac: brcmf_add_if: ignore IF event
[    6.538340] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.538387] brcmfmac: power management disabled
[    6.921156] uart-pl011 3f201000.uart: no DMA platform data
[    7.186771] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:176124k SSFS
[    7.671037] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.671490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.671645] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    8.639770] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[    8.751156] usb 1-1.2: New USB device found, idVendor=12d1, idProduct=1001
[    8.751173] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[    8.751179] usb 1-1.2: Product: HUAWEI Mobile
[    8.751189] usb 1-1.2: Manufacturer: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[    8.751198] usb 1-1.2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[    8.753340] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    8.755098] scsi host0: usb-storage 1-1.2:1.0
[    8.912377] usb 1-1.2: USB disconnect, device number 5
[    9.229733] usb 1-1.2: new full-speed USB device number 6 using dwc_otg
[    9.337456] usb 1-1.2: New USB device found, idVendor=12d1, idProduct=1001
[    9.337471] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=1
[    9.337477] usb 1-1.2: Product: HUAWEI Mobile
[    9.337483] usb 1-1.2: Manufacturer: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[    9.337490] usb 1-1.2: SerialNumber: ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
[    9.341722] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    9.344800] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[    9.347525] usb-storage 1-1.2:1.2: USB Mass Storage device detected
[    9.347914] usb-storage 1-1.2:1.3: USB Mass Storage device detected
[    9.349483] scsi host4: usb-storage 1-1.2:1.3
[    9.380617] usbcore: registered new interface driver usbserial
[    9.380667] usbcore: registered new interface driver usbserial_generic
[    9.380708] usbserial: USB Serial support registered for generic
[    9.412148] usbcore: registered new interface driver option
[    9.412210] usbserial: USB Serial support registered for GSM modem (1-port)
[    9.412517] option 1-1.2:1.0: GSM modem (1-port) converter detected
[    9.412786] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[    9.412846] option 1-1.2:1.1: GSM modem (1-port) converter detected
[    9.413054] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[    9.413099] option 1-1.2:1.2: GSM modem (1-port) converter detected
[    9.413281] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[   10.354505] scsi 4:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   10.359010] scsi 4:0:0:1: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   10.367941] scsi 4:0:0:0: Attached scsi generic sg0 type 5
[   10.368230] sd 4:0:0:1: Attached scsi generic sg1 type 0
[   10.375522] sd 4:0:0:1: [sda] Attached SCSI removable disk
[   10.392121] sr 4:0:0:0: [sr0] scsi-1 drive
[   10.392134] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.392636] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   10.497073] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[   10.497114] option 1-1.2:1.0: device disconnected
[   10.497270] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[   10.497299] option 1-1.2:1.1: device disconnected
[   10.497430] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[   10.497459] option 1-1.2:1.2: device disconnected
[   10.589760] usb 1-1.2: reset full-speed USB device number 6 using dwc_otg
[   10.693833] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   10.694090] option 1-1.2:1.0: GSM modem (1-port) converter detected
[   10.694376] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
[   10.694440] usb-storage 1-1.2:1.1: USB Mass Storage device detected
[   10.694628] option 1-1.2:1.1: GSM modem (1-port) converter detected
[   10.694849] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1
[   10.694913] usb-storage 1-1.2:1.2: USB Mass Storage device detected
[   10.695127] option 1-1.2:1.2: GSM modem (1-port) converter detected
[   10.695365] usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB2
[   10.695427] sd 4:0:0:1: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=0x00
[   10.695440] sd 4:0:0:1: [sda] tag#0 CDB: opcode=0x85 85 06 20 00 05 00 fe 00 00 00 00 00 00 40 ef 00
[   11.343599] Bluetooth: Core ver 2.21
[   11.344110] NET: Registered protocol family 31
[   11.344120] Bluetooth: HCI device and connection manager initialized
[   11.344134] Bluetooth: HCI socket layer initialized
[   11.344144] Bluetooth: L2CAP socket layer initialized
[   11.344178] Bluetooth: SCO socket layer initialized
[   11.349900] Bluetooth: HCI UART driver ver 2.3
[   11.349913] Bluetooth: HCI UART protocol H4 registered
[   11.349918] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.350028] Bluetooth: HCI UART protocol BCM registered
[   11.558510] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.558523] Bluetooth: BNEP filters: protocol multicast
commandes.txt (text/plain, 200 B) 
pi@raspberrypi:~ $ echo "hello" | gammu sendsms TEXT 0778380991
If you want break, press Ctrl+C...
Sending SMS 1/1....waiting for network answer..erreur 500, message reference=-1
Erreur inconnue.