Re: gammu getallsms returns nothing for Huawei E303 modem
gilberto dos santos alves <[email protected]> Mon, 21 Nov 2016 13:43:22 -0200
| Newsgroups | gmane.linux.drivers.gammu |
|---|---|
| Message-ID | <CAP9G-N+CHhSDEUf28Mdt9Unz19Le48St2t3kr94EcVrr4hCRvw@mail.gmail.com> |
look your dmesg or usr lsusb and use vendor:device . generally eorks too. Em 20/11/2016 16:02, "Hendrik Greving" <[email protected]> escreveu: > Hi, sorry should have posted this. I have > > [gammu] > > port = /dev/ttyUSB1 > model = > connection = at19200 > synchronizetime = yes > logfile = > logformat = nothing > use_locking = > gammuloc = > > I have also tried ttyUSB2 and ttyUSB3. ttyUSB3 behaves the same as > ttyUSB1, while ttyUSB2 doesn't work at all (timeout). > > > On Sun, Nov 20, 2016 at 9:44 AM, gilberto dos santos alves < > [email protected]> wrote: > >> hi. in your getallsms explicity what is your gammuc or config for use. >> home/your-user or /etc/gammurc >> >> Em 20/11/2016 15:37, "Hendrik Greving" <[email protected]> escreveu: >> >>> Hello, >>> >>> I am using a Huawei E303 3G Dongle with Ubuntu 16.04 (and/or nanopi >>> system behaves identically as below). I am doing the following: >>> >>> 1) Disable mode switching in /etc/usb_modeswitch.conf 2) Connect dongle >>> 3) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M >>> "55534243000000000000000000000011060000000000000000000000000000" >>> >>> I now have /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3 (/dev/ttyUSB0 is >>> used by another serial device) >>> >>> I got the latest gammu -v 1.37.91. I can send SMS by >>> >>> echo "BLAH" | sudo gammu sendsms TEXT +1########## >>> >>> however, "sudo gammu getallsms" returns: >>> >>> 0 SMS parts in 0 SMS sequences >>> >>> however there should already be SMS available and I can see them when >>> switching the dongle to ethernet mode >>> >>> 1) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M >>> "55534243123456780000000000000a11062000000000000100000000000000" 2) >>> http://192.168.1.1 -> check SMS in web interface >>> >>> before I debug gammu and/or manual AT commands, anybody have an idea >>> what could be wrong why I am not able to receive SMS using gammu? >>> >>> Thank you, Hendrik >>> >>> ------------------------------------------------------------ >>> ------------------ >>> >>> _______________________________________________ >>> Gammu-users mailing list - https://lists.sourceforge.net/ >>> lists/listinfo/gammu-users >>> >>> >> ------------------------------------------------------------ >> ------------------ >> >> _______________________________________________ >> Gammu-users mailing list - https://lists.sourceforge.net/ >> lists/listinfo/gammu-users >> >> > > ------------------------------------------------------------ > ------------------ > > _______________________________________________ > Gammu-users mailing list - https://lists.sourceforge.net/ > lists/listinfo/gammu-users > > ------------------------------------------------------------------------------ _______________________________________________ Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users