Re: Sending arabic sms in windows environment

[1]
http://www.isunshare.com/windows-10/change-system-locale-in-windows-10.html
hi. please what is your encode of windows installation (cp1252 is here in
brazil) what is your windows? what is your locale assign to your user (for
brazil we use por ptb and alias pt_BR) please these locale are root for
howto handle conversion between languages. [1]


--
gilberto dos santos alves
+55(11)9-8646-5049
sao paulo - sp - brasil





2016-11-22 9:08 GMT-02:00 Zulfi Erken <[email protected]>:

> I just need help about this issue. I am using:
>
> 1-Windows 10 platform
> 2- XAMPP PHP 5
> 3- ODBC driver to connect to mysql
> 4- Drupal 7 to send sms with locale language English.
>
> My problem is;
> When I send an SMS with Arabic characters it sends message with unreadable
> characters.
> If I use -unicode; it simply ignore the part written in Arabic.
> If I change the message type to EMS it does not send at all.
>
> How can I configure gammu-smsd config file and/or php to send sms in Arabic
> with using gammu smsd service?
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]
> Sent: Sunday, November 20, 2016 7:03 PM
> To: [email protected]
> Subject: Gammu-users Digest, Vol 126, Issue 7
>
> Send Gammu-users mailing list submissions to
>         [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.sourceforge.net/lists/listinfo/gammu-users
> or, via email, send a message with subject or body 'help' to
>         [email protected]
>
> You can reach the person managing the list at
>         [email protected]
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Gammu-users digest..."
>
>
> Today's Topics:
>
>    1. Re: Running wammu installed in an alternative directory (cristian)
>    2. Sending sms in arabic language. (Zulfi Erken)
>    3. gammu getallsms returns nothing for Huawei E303 modem
>       (Hendrik Greving)
>    4. Re: gammu getallsms returns nothing for Huawei E303 modem
>       (gilberto dos santos alves)
>    5. Re: gammu getallsms returns nothing for Huawei E303 modem
>       (Hendrik Greving)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 17 Nov 2016 10:33:44 +0100
> From: cristian <[email protected]>
> Subject: Re: Running wammu installed in an alternative directory
> To: [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=UTF-8
>
> On Wed, 16 Nov 2016 15:08:54 +0100
> Michal ?iha? <[email protected]> wrote:
>
> > Hi
> >
> > Okay, it's even not in path? Then you probably need something like:
> >
> > PYTHONPATH=/opt/wammu/lib/python2.7/site-packages /opt/wammu/bin/wammu
> >
> > But still it depends on where you've installed Wammu.
>
> I've typed:
>
> PYTHONPATH=/opt/wammu/lib/python2.7/site-packages /opt/wammu/bin/wammu
>
> so, two dialogs appear. The first is named 'Wammu Error': it says ?Failed
> to
> load image from file "./icon/wammu.png".? and in 'Details' I can see ?can't
> open file './icon/wammu.png' (error 2: No such file or directory)? and
> ?Failed to load image from file "./icon/wammu.png".?.
>
> The second one, named 'Unhandled exception', contains, exactly:
>
> "Unhandled exception appeared. If you want to help improving this program,
> please report this together with description how this situation has
> happened. Please report in english, otherwise you will be most likely told
> to translate you report to english later.
>
> Traceback:
>   File "/opt/wammu/bin/wammu", line 182, in <module>
>     Wammu.App.Run()
>   File "/opt/wammu/lib/python2.7/site-packages/Wammu/App.py", line 67, in
> Run
>     app = WammuApp()
>   File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line
> 8628, in __init__
>     self._BootstrapApp()
>   File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line
> 8196, in _BootstrapApp
>     return _core_.PyApp__BootstrapApp(*args, **kwargs)
>   File "/opt/wammu/lib/python2.7/site-packages/Wammu/App.py", line 48, in
> OnInit
>     frame = Wammu.Main.WammuFrame(None, -1)
>   File "/opt/wammu/lib/python2.7/site-packages/Wammu/Main.py", line 174,
> in
> __init__
>     self.icon.CopyFromBitmap(wx.BitmapFromImage(img))
>   File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_gdi.py", line
> 884,
> in BitmapFromImage
>     val = _gdi_.new_BitmapFromImage(*args, **kwargs)
>
> Exception: PyAssertionError: C++ assertion "image.IsOk()" failed at
> ../src/gtk/bitmap.cpp(626) in wxBitmap(): invalid image"
>
> The wammu.png icon is located into /opt/wammu/share/pixmaps.
>
> Exactly, how should I change the command to type in the terminal?
>
> Thanks.
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 18 Nov 2016 15:24:11 +0100
> From: "Zulfi Erken" <[email protected]>
> Subject: Sending sms in arabic language.
> To: <[email protected]>
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> How can I send SMS in Arabic language with using PHP. My text has Arabic
> characters but sent sms has not readable ones.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 3
> Date: Sun, 20 Nov 2016 09:36:38 -0800
> From: Hendrik Greving <[email protected]>
> Subject: gammu getallsms returns nothing for Huawei E303 modem
> To: [email protected]
> Message-ID:
>         <CAB1qr4GT=OUs9tufv-tKTUm9m3OCvqcjEKtZnRRmYMLVo=kw
> [email protected]>
> Content-Type: text/plain; charset="utf-8"
>
> Hello,
>
> I am using a Huawei E303 3G Dongle with Ubuntu 16.04 (and/or nanopi system
> behaves identically as below). I am doing the following:
>
> 1) Disable mode switching in /etc/usb_modeswitch.conf 2) Connect dongle 3)
> sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M
> "55534243000000000000000000000011060000000000000000000000000000"
>
> I now have /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3 (/dev/ttyUSB0 is used
> by
> another serial device)
>
> I got the latest gammu -v 1.37.91. I can send SMS by
>
> echo "BLAH" | sudo gammu sendsms TEXT +1##########
>
> however, "sudo gammu getallsms" returns:
>
> 0 SMS parts in 0 SMS sequences
>
> however there should already be SMS available and I can see them when
> switching the dongle to ethernet mode
>
> 1) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M
> "55534243123456780000000000000a11062000000000000100000000000000" 2)
> http://192.168.1.1 -> check SMS in web interface
>
> before I debug gammu and/or manual AT commands, anybody have an idea what
> could be wrong why I am not able to receive SMS using gammu?
>
> Thank you, Hendrik
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 4
> Date: Sun, 20 Nov 2016 15:44:01 -0200
> From: gilberto dos santos alves <[email protected]>
> Subject: Re: gammu getallsms returns nothing for Huawei E303 modem
> To: gammu-users <[email protected]>
> Message-ID:
>         <CAP9G-NKKKG1v+PH4_FwbnkeQdhe1jvwmU=f9G6OfQeMkqni
> [email protected]>
> Content-Type: text/plain; charset="utf-8"
>
> hi. in your getallsms explicity what is your gammuc or config for use.
> home/your-user or /etc/gammurc
>
> Em 20/11/2016 15:37, "Hendrik Greving" <[email protected]> escreveu:
>
> > Hello,
> >
> > I am using a Huawei E303 3G Dongle with Ubuntu 16.04 (and/or nanopi
> > system behaves identically as below). I am doing the following:
> >
> > 1) Disable mode switching in /etc/usb_modeswitch.conf 2) Connect
> > dongle 3) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M
> "
> > 55534243000000000000000000000011060000000000000000000000000000"
> >
> > I now have /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3 (/dev/ttyUSB0 is
> > used by another serial device)
> >
> > I got the latest gammu -v 1.37.91. I can send SMS by
> >
> > echo "BLAH" | sudo gammu sendsms TEXT +1##########
> >
> > however, "sudo gammu getallsms" returns:
> >
> > 0 SMS parts in 0 SMS sequences
> >
> > however there should already be SMS available and I can see them when
> > switching the dongle to ethernet mode
> >
> > 1) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M "
> > 55534243123456780000000000000a11062000000000000100000000000000" 2)
> > http://192.168.1.1 -> check SMS in web interface
> >
> > before I debug gammu and/or manual AT commands, anybody have an idea
> > what could be wrong why I am not able to receive SMS using gammu?
> >
> > Thank you, Hendrik
> >
> > ------------------------------------------------------------
> > ------------------
> >
> > _______________________________________________
> > Gammu-users mailing list - https://lists.sourceforge.net/
> > lists/listinfo/gammu-users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 5
> Date: Sun, 20 Nov 2016 10:02:29 -0800
> From: Hendrik Greving <[email protected]>
> Subject: Re: gammu getallsms returns nothing for Huawei E303 modem
> To: Gammu and Wammu related discussions
>         <[email protected]>
> Message-ID:
>         <CAB1qr4F82oTLop+_T88-=wApfjPmoM5mywsHQF+JvgnxUp05Kw@mail.
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi, sorry should have posted this. I have
>
> [gammu]
>
> port = /dev/ttyUSB1
> model =
> connection = at19200
> synchronizetime = yes
> logfile =
> logformat = nothing
> use_locking =
> gammuloc =
>
> I have also tried ttyUSB2 and ttyUSB3. ttyUSB3 behaves the same as ttyUSB1,
> while ttyUSB2 doesn't work at all (timeout).
>
>
> On Sun, Nov 20, 2016 at 9:44 AM, gilberto dos santos alves <
> [email protected]
> > wrote:
>
> > hi. in your getallsms explicity what is your gammuc or config for use.
> > home/your-user or /etc/gammurc
> >
> > Em 20/11/2016 15:37, "Hendrik Greving" <[email protected]> escreveu:
> >
> >> Hello,
> >>
> >> I am using a Huawei E303 3G Dongle with Ubuntu 16.04 (and/or nanopi
> >> system behaves identically as below). I am doing the following:
> >>
> >> 1) Disable mode switching in /etc/usb_modeswitch.conf 2) Connect
> >> dongle
> >> 3) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M
> >> "55534243000000000000000000000011060000000000000000000000000000"
> >>
> >> I now have /dev/ttyUSB1, /dev/ttyUSB2, /dev/ttyUSB3 (/dev/ttyUSB0 is
> >> used by another serial device)
> >>
> >> I got the latest gammu -v 1.37.91. I can send SMS by
> >>
> >> echo "BLAH" | sudo gammu sendsms TEXT +1##########
> >>
> >> however, "sudo gammu getallsms" returns:
> >>
> >> 0 SMS parts in 0 SMS sequences
> >>
> >> however there should already be SMS available and I can see them when
> >> switching the dongle to ethernet mode
> >>
> >> 1) sudo usb_modeswitch -v 0x12d1 -p 0x1f01 -V 0x12d1 -P 0x14dc -M
> >> "55534243123456780000000000000a11062000000000000100000000000000" 2)
> >> http://192.168.1.1 -> check SMS in web interface
> >>
> >> before I debug gammu and/or manual AT commands, anybody have an idea
> >> what could be wrong why I am not able to receive SMS using gammu?
> >>
> >> Thank you, Hendrik
> >>
> >> ------------------------------------------------------------
> >> ------------------
> >>
> >> _______________________________________________
> >> Gammu-users mailing list - https://lists.sourceforge.net/
> >> lists/listinfo/gammu-users
> >>
> >>
> > ------------------------------------------------------------
> > ------------------
> >
> > _______________________________________________
> > Gammu-users mailing list - https://lists.sourceforge.net/
> > lists/listinfo/gammu-users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> ------------------------------------------------------------
> ----------------
> --
>
>
> ------------------------------
>
> _______________________________________________
> Gammu-users mailing list -
> https://lists.sourceforge.net/lists/listinfo/gammu-users
>
>
> End of Gammu-users Digest, Vol 126, Issue 7
> *******************************************
>
>
> ------------------------------------------------------------
> ------------------
> _______________________________________________
> Gammu-users mailing list - https://lists.sourceforge.net/
> lists/listinfo/gammu-users
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users