Re: commands, responses and log
Sylvain Ard <[email protected]> Thu, 15 Dec 2016 10:42:48 +0100
| Newsgroups | gmane.linux.drivers.gammu |
|---|---|
| Message-ID | <CAA86q2GAVrkrfWZNEEq-OgW8UzYNRU5Lhw9eBAeGPVO=mb-Q1A@mail.gmail.com> |
another try, this time I put DebugLevel at 255 2016-12-15 10:15 GMT+01:00 Sylvain Ard <[email protected]>: > I join the log for your command > > 2016-12-15 0:43 GMT+01:00 gilberto dos santos alves <[email protected]>: > >> but i understand you already go to step that send sms, and i tell that >> this example that is on gammu manual is not good to explain what is going >> on. >> why? >> because we need step by step to understand things lets go avanti! >> >> put on gammu command explicit place where you want write your log file, >> what name and extension you want for your logfile, what type log you want >> and what level (1 to 255 (255 is very details)), so my advice for teste >> your sms: >> >> gammu -c /path/your-config-gammurc -d textall -f >> /path/your-log-file-for-sms.log sendsms TEXT number-destination >> 'your-message-delimited-by-apost' >> >> -- >> gilberto dos santos alves >> +55(11)9-8646-5049 >> sao paulo - sp - brasil >> >> >> >> >> >> 2016-12-14 21:28 GMT-02:00 gilberto dos santos alves <[email protected]>: >> >>> congratulations! now that we have commands working and log we cold read >>> and analyze! >>> >>> -- >>> gilberto dos santos alves >>> +55(11)9-8646-5049 >>> sao paulo - sp - brasil >>> >>> >>> >>> >>> >>> 2016-12-14 7:58 GMT-02:00 Sylvain Ard <[email protected]>: >>> >>>> Hi, >>>> >>>> OK I have change my config file to : >>>> >>>> device=/dev/ttyUSB0 >>>> connection = at >>>> logfile = /home/pi/gammuraspy.log >>>> logformat = textalldate >>>> gammucoding = utf8 >>>> >>>> Then I run these commands and got theses results : >>>> >>>> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify >>>> Erreur à l'ouverture du périphérique : périphérique inconnu, occupé ou >>>> problème de permissions. >>>> pi@raspberrypi:~ $ sudo service gammu-smsd stop >>>> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify >>>> Périphérique : /dev/ttyUSB0 >>>> Fabricant : Huawei >>>> Modèle : E169 (E169) >>>> Firmware : 11.314.13.51.156 >>>> IMEI : 359638018980742 >>>> SIM IMSI : 208150009082056 >>>> >>>> Then I tried to send a sms : >>>> I got : >>>> >>>> pi@raspberrypi:~ $ echo "SMS" | gammu --sendsms TEXT 0778380991 >>>> If you want break, press Ctrl+C... >>>> Sending SMS 1/1....waiting for network answer..erreur 500, message >>>> reference=-1 >>>> Erreur inconnue. >>>> >>>> I join the log >>>> Thank you >>>> Bye >>>> >>>> >>>> >>>> 2016-12-14 10:36 GMT+01:00 Michal Čihař <[email protected]>: >>>> >>>>> Hi >>>>> >>>>> Sylvain Ard píše v Po 12. 12. 2016 v 19:42 +0100: >>>>> > Hi, >>>>> > I do what Gilberto Dos Santos Alves said but I got : >>>>> > >>>>> > pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify >>>>> > Warning: Configuration could not be parsed! >>>>> > Avertissement: No configuration read, using builtin defaults! >>>>> > Erreur à l'ouverture du périphérique: il n'existe pas. >>>>> > and my gammurc.cfg is : >>>>> > >>>>> > connection = at19200 >>>>> > logfile = /home/pi/gammuraspy.log >>>>> > logformat = textalldate >>>>> > gammucoding = utf8 >>>>> > I tried with free, at and at19200 but I got always the same error >>>>> > Thank you for helping me >>>>> >>>>> Your file is missing [gammu] section header, see our docs: >>>>> >>>>> https://wammu.eu/docs/manual/config/index.html#examples >>>>> >>>>> -- >>>>> Michal Čihař | https://cihar.com/ | https://weblate.org/ >>>>> >>>>> ------------------------------------------------------------ >>>>> ------------------ >>>>> Check out the vibrant tech community on one of the world's most >>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>>> _______________________________________________ >>>>> Gammu-users mailing list - https://lists.sourceforge.net/ >>>>> lists/listinfo/gammu-users >>>>> >>>>> >>>> >>>> ------------------------------------------------------------ >>>> ------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >>>> _______________________________________________ >>>> Gammu-users mailing list - https://lists.sourceforge.net/ >>>> lists/listinfo/gammu-users >>>> >>>> >>> >> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, SlashDot.org! http://sdm.link/slashdot >> _______________________________________________ >> Gammu-users mailing list - https://lists.sourceforge.net/ >> lists/listinfo/gammu-users >> >> > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users
gammu-sms2.log
(application/octet-stream, 14.4 KB)
[Gammu - 1.33.0 built 08:46:05 Aug 14 2013 using GCC 4.6]
[Connection - "at"]
[Connection index - 0]
[Model type - ""]
[Device - "/dev/ttyUSB2"]
[Running on - Linux, kernel 4.4.34-v7+ (#930 SMP Wed Nov 23 15:20:41 GMT 2016)]
Serial device: DTR is up, RTS is up, CAR is down, CTS is down
Setting speed to 19200
[Module - "auto"]
Escaping SMS mode
SENDING frametype 0x00/length 0x02/2
1B |0D ..
Sending simple AT command to wake up some devices
SENDING frametype 0x00/length 0x03/3
41A|54T|0D AT.
1 "AT"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x09/9
41A|54T|0D |0D |0A |4FO|4BK|0D |0A AT...OK..
Enabling echo
SENDING frametype 0x00/length 0x05/5
41A|54T|45E|311|0D ATE1.
1 "ATE1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x0B/11
41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A ATE1...OK..
Trying Motorola mode switch
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D AT+MODE=2.
1 "AT+MODE=2"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x21/33
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |43C|4FO|4DM|4DM AT+MODE=2...COMM
41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T|0D AND NOT SUPPORT.
0A .
Seems not to be supported
Enabling CME errors
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D AT+CMEE=1.
1 "AT+CMEE=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x10/16
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A AT+CMEE=1...OK..
SENDING frametype 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT+CSCS?.
1 "AT+CSCS?"
2 "+CSCS: "IRA""
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x1F/31
41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
3A:|20 |22"|49I|52R|41A|22"|0D |0A |0D |0A |4FO|4BK|0D |0A : "IRA"....OK..
SENDING frametype 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|49I|0D AT+CGMI.
1 "AT+CGMI"
2 "huawei"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x18/24
41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i AT+CGMI...huawei
0D |0A |0D |0A |4FO|4BK|0D |0A ....OK..
Manufacturer info received
[Manufacturer: Huawei]
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D AT+CSCS=?.
1 "AT+CSCS=?"
2 "+CSCS: ("IRA","GSM","UCS2")"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x2F/47
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C AT+CSCS=?...+CSC
53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S: ("IRA","GSM",
22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A "UCS2")....OK..
Chosen GSM as normal charset
Chosen UCS2 as unicode charset
SENDING frametype 0x00/length 0x0E/14
41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D AT+CSCS="GSM".
1 "AT+CSCS="GSM""
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x14/20
41A|54T|2B+|43C|53S|43C|53S|3D=|22"|47G|53S|4DM|22"|0D |0D |0A AT+CSCS="GSM"...
4FO|4BK|0D |0A OK..
SENDING frametype 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT+CSCS?.
1 "AT+CSCS?"
2 "+CSCS: "GSM""
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x1F/31
41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A : "GSM"....OK..
Getting model
SENDING frametype 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|4DM|0D AT+CGMM.
1 "AT+CGMM"
2 "E169"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x16/22
41A|54T|2B+|43C|47G|4DM|4DM|0D |0D |0A |45E|311|366|399|0D |0A AT+CGMM...E169..
0D |0A |4FO|4BK|0D |0A ..OK..
[Model name: `E169']
[Model data: `E169']
[Model data: `E169']
[Connected model - "E169"]
Checking for OBEX support
SENDING frametype 0x00/length 0x0B/11
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D AT+CPROT=?.
1 "AT+CPROT=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x22/34
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |43C|4FO|4DM AT+CPROT=?...COM
4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T MAND NOT SUPPORT
0D |0A ..
Checking for SYNCML/OBEX support
SENDING frametype 0x00/length 0x0C/12
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D AT+SYNCML=?.
1 "AT+SYNCML=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x23/35
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |43C|4FO AT+SYNCML=?...CO
4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R MMAND NOT SUPPOR
54T|0D |0A T..
Checking for SYNCML/OBEX support
SENDING frametype 0x00/length 0x0D/13
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D AT$TSSPCSW=?.
1 "AT$TSSPCSW=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x24/36
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |43C AT$TSSPCSW=?...C
4FO|4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO OMMAND NOT SUPPO
52R|54T|0D |0A RT..
[Module - "A2D|iPAQ|at|M20|S25|MC35|TC35|C35i|S65|S300|5110|5130|5190|5210|6110|6130|6150|6190|6210|6250|6310|6310i|6510|7110|8210|8250|8290|8310|8390|8850|8855|8890|8910|9110|9210"]
Escaping SMS mode
SENDING frametype 0x00/length 0x02/2
1B |0D ..
Sending simple AT command to wake up some devices
SENDING frametype 0x00/length 0x03/3
41A|54T|0D AT.
1 "AT"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x09/9
41A|54T|0D |0D |0A |4FO|4BK|0D |0A AT...OK..
Enabling echo
SENDING frametype 0x00/length 0x05/5
41A|54T|45E|311|0D ATE1.
1 "ATE1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x0B/11
41A|54T|45E|311|0D |0D |0A |4FO|4BK|0D |0A ATE1...OK..
Trying Motorola mode switch
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D AT+MODE=2.
1 "AT+MODE=2"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x21/33
41A|54T|2B+|4DM|4FO|44D|45E|3D=|322|0D |0D |0A |43C|4FO|4DM|4DM AT+MODE=2...COMM
41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T|0D AND NOT SUPPORT.
0A .
Seems not to be supported
Enabling CME errors
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D AT+CMEE=1.
1 "AT+CMEE=1"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x10/16
41A|54T|2B+|43C|4DM|45E|45E|3D=|311|0D |0D |0A |4FO|4BK|0D |0A AT+CMEE=1...OK..
SENDING frametype 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT+CSCS?.
1 "AT+CSCS?"
2 "+CSCS: "GSM""
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x1F/31
41A|54T|2B+|43C|53S|43C|53S|3F?|0D |0D |0A |2B+|43C|53S|43C|53S AT+CSCS?...+CSCS
3A:|20 |22"|47G|53S|4DM|22"|0D |0A |0D |0A |4FO|4BK|0D |0A : "GSM"....OK..
SENDING frametype 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|49I|0D AT+CGMI.
1 "AT+CGMI"
2 "huawei"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x18/24
41A|54T|2B+|43C|47G|4DM|49I|0D |0D |0A |68h|75u|61a|77w|65e|69i AT+CGMI...huawei
0D |0A |0D |0A |4FO|4BK|0D |0A ....OK..
Manufacturer info received
[Manufacturer: Huawei]
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D AT+CSCS=?.
1 "AT+CSCS=?"
2 "+CSCS: ("IRA","GSM","UCS2")"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x2F/47
41A|54T|2B+|43C|53S|43C|53S|3D=|3F?|0D |0D |0A |2B+|43C|53S|43C AT+CSCS=?...+CSC
53S|3A:|20 |28(|22"|49I|52R|41A|22"|2C,|22"|47G|53S|4DM|22"|2C, S: ("IRA","GSM",
22"|55U|43C|53S|322|22"|29)|0D |0A |0D |0A |4FO|4BK|0D |0A "UCS2")....OK..
Chosen GSM as normal charset
Chosen UCS2 as unicode charset
Checking for OBEX support
SENDING frametype 0x00/length 0x0B/11
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D AT+CPROT=?.
1 "AT+CPROT=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x22/34
41A|54T|2B+|43C|50P|52R|4FO|54T|3D=|3F?|0D |0D |0A |43C|4FO|4DM AT+CPROT=?...COM
4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R|54T MAND NOT SUPPORT
0D |0A ..
Checking for SYNCML/OBEX support
SENDING frametype 0x00/length 0x0C/12
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D AT+SYNCML=?.
1 "AT+SYNCML=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x23/35
41A|54T|2B+|53S|59Y|4EN|43C|4DM|4CL|3D=|3F?|0D |0D |0A |43C|4FO AT+SYNCML=?...CO
4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO|52R MMAND NOT SUPPOR
54T|0D |0A T..
Checking for SYNCML/OBEX support
SENDING frametype 0x00/length 0x0D/13
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D AT$TSSPCSW=?.
1 "AT$TSSPCSW=?"
2 "COMMAND NOT SUPPORT"
Checking line: COMMAND NOT SUPPORT
AT reply state: 3
RECEIVED frametype 0x00/length 0x24/36
41A|54T|24$|54T|53S|53S|50P|43C|53S|57W|3D=|3F?|0D |0D |0A |43C AT$TSSPCSW=?...C
4FO|4DM|4DM|41A|4EN|44D|20 |4EN|4FO|54T|20 |53S|55U|50P|50P|4FO OMMAND NOT SUPPO
52R|54T|0D |0A RT..
Getting firmware versions
SENDING frametype 0x00/length 0x08/8
41A|54T|2B+|43C|47G|4DM|52R|0D AT+CGMR.
1 "AT+CGMR"
2 "11.314.13.51.156"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x22/34
41A|54T|2B+|43C|47G|4DM|52R|0D |0D |0A |311|311|2E.|333|311|344 AT+CGMR...11.314
2E.|311|333|2E.|355|311|2E.|311|355|366|0D |0A |0D |0A |4FO|4BK .13.51.156....OK
0D |0A ..
Received firmware version: "11.314.13.51.156"
Number version is "11,314135"
[Firmware version - "11.314.13.51.156"]
[Connected]
Checking used: UDH len 0, UsedBytes 0, FreeText 160, UsedText 0, FreeBytes 140
Adding text
Copy 160 (max 5)
Defalt text, length 5 5
Text added
Checking at the end: UDH len 0, UsedBytes 5, FreeText 155, UsedText 5, FreeBytes 135
5 5
Entering GSM_GetSMSC
Getting SMSC
SENDING frametype 0x00/length 0x09/9
41A|54T|2B+|43C|53S|43C|41A|3F?|0D AT+CSCA?.
1 "AT+CSCA?"
2 "+CSCA: "+33695000695",145"
3 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x2C/44
41A|54T|2B+|43C|53S|43C|41A|3F?|0D |0D |0A |2B+|43C|53S|43C|41A AT+CSCA?...+CSCA
3A:|20 |22"|2B+|333|333|366|399|355|300|300|300|366|399|355|22" : "+33695000695"
2C,|311|344|355|0D |0A |0D |0A |4FO|4BK|0D |0A ,145....OK..
SMSC info received
Parsing +CSCA: "+33695000695",145 with +CSCA: @p, @i
Grabbed string from reply: "+33695000695" (parsed 14 bytes)
Parsed phone string "+33695000695"
Phone string decoded as "+33695000695"
Parsed int 145
Leaving GSM_GetSMSC
Entering GSM_SendSMS
Trying SMS PDU mode
SENDING frametype 0x00/length 0x0A/10
41A|54T|2B+|43C|4DM|47G|46F|3D=|300|0D AT+CMGF=0.
1 "AT+CMGF=0"
2 "OK"
Checking line: OK
AT reply state: 1
RECEIVED frametype 0x00/length 0x10/16
41A|54T|2B+|43C|4DM|47G|46F|3D=|300|0D |0D |0A |4FO|4BK|0D |0A AT+CMGF=0...OK..
SMS Submit
Recipient number "0778380991"
SMSC number "+33695000695"
SMS class -1
SMS validity ff
TPMR: 00 0
7 bit SMS, length 5, 5
hello
Waiting for modem prompt
SENDING frametype 0x00/length 0x0B/11
41A|54T|2B+|43C|4DM|47G|53S|3D=|311|388|0D AT+CMGS=18.
1 "AT+CMGS=18"
2 "> "
Checking line: >
AT reply state: 7
RECEIVED frametype 0x00/length 0x0F/15
41A|54T|2B+|43C|4DM|47G|53S|3D=|311|388|0D |0D |0A |3E>|20 AT+CMGS=18...>
Sending SMS
SENDING frametype 0x00/length 0x34/52
300|377|399|311|333|333|399|366|300|355|300|300|399|366|46F|355 07913396050096F5
311|311|300|300|300|41A|388|311|377|300|388|377|388|333|399|300 11000A8170878390
311|399|300|300|300|300|46F|46F|300|355|45E|388|333|322|399|42B 190000FF05E8329B
46F|44D|300|366 FD06
SENDING frametype 0x00/length 0x01/1
1A .
Leaving GSM_SendSMS
1 "AT+CMGS=18"
2 "> 07913396050096F511000A8170878390190000FF05E8329BFD06"
3 "+CMS ERROR: 500"
Checking line: +CMS ERROR: 500
AT reply state: 5
RECEIVED frametype 0x00/length 0x58/88
41A|54T|2B+|43C|4DM|47G|53S|3D=|311|388|0D |0D |0A |3E>|20 |300 AT+CMGS=18...> 0
377|399|311|333|333|399|366|300|355|300|300|399|366|46F|355|311 7913396050096F51
311|300|300|300|41A|388|311|377|300|388|377|388|333|399|300|311 1000A81708783901
399|300|300|300|300|46F|46F|300|355|45E|388|333|322|399|42B|46F 90000FF05E8329BF
44D|300|366|0D |0A |0D |0A |2B+|43C|4DM|53S|20 |45E|52R|52R|4FO D06....+CMS ERRO
52R|3A:|20 |355|300|300|0D |0A R: 500..
Error 500
Sent SMS on device: "/dev/ttyUSB2"
CMS Error 500: "unknown error"
[Terminating]
[Closing]