Re: gnokii smsd not giving me a clue as to why it is not sending and receiving sms'

helpFractal <[email protected]>
Newsgroups gmane.linux.drivers.gnokii
Message-ID <[email protected]>
Hi, 

Thanks for your help so far, I got a little further ...

imac:~ fractal$ echo "This is a test message" | sudo gnokii --sendsms
447721234567 --report --smsc +447958879890

GNOKII Version 0.6.31

...etc...

Sending
Message sent: 0x65 / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x65 / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK 
Received message type 65
PDU mode set
Sending initial sequence
Message sent: 0x66 / 0x000b
41 54 2b 43 4d 47 53 3d 33 34 0d                | AT+CMGS=34      
write: [AT+CMGS=34<cr>]
read : [AT+CMGS=34<cr><cr><lf>> ]
Message received: 0x66 / 0x000f
01 41 54 2b 43 4d 47 53 3d 33 34 0d 0d 0a 3e    |  AT+CMGS=34   > 
Received message type 66
Got response: No error.
Sending frame:
079144978578890931000C814477123254760000AA1654747A0E4ACF416110BD3CA783DAE5F93C7C2E03
Message sent: 0x21 / 0x0055
30 37 39 31 34 34 39 37 38 35 37 38 38 39 30 39 | 0791449785788909
33 31 30 30 30 43 38 31 34 34 37 37 31 32 33 32 | 31000C8144771232
35 34 37 36 30 30 30 30 41 41 31 36 35 34 37 34 | 54760000AA165474
37 41 30 45 34 41 43 46 34 31 36 31 31 30 42 44 | 7A0E4ACF416110BD
33 43 41 37 38 33 44 41 45 35 46 39 33 43 37 43 | 3CA783DAE5F93C7C
32 45 30 33 1a                                  | 2E03            
write:
[079144978578890931000C814477123254760000AA1654747A0E4ACF416110BD3CA783DAE5F93C7C2E03^Z]
SMS Send failed (Command timed out.)
Serial device: closing device

Now it is timing out when the message is being sent. I also have the same
problem in the terminal 'screen /dev/cu.usbmodem431' when it comes to the
text of the message, I am using text mode, and at the '>' prompt I type my
message then CTRL+Z and nothing happens, which is perhaps the same issue as
shown above.

Question: Why would my usb modem not respond to CTRL+Z?
-- 
View this message in context: http://old.nabble.com/gnokii-smsd-not-giving-me-a-clue-as-to-why-it-is-not-sending-and-receiving-sms%27-tp34856997p34862838.html
Sent from the gnokii-users mailing list archive at Nabble.com.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.