CMS Error 500
Benedikt Carda <[email protected]> Fri, 07 Feb 2014 12:38:54 +0100
| Newsgroups | gmane.linux.drivers.gnokii |
|---|---|
| Message-ID | <[email protected]> |
Hello,
I am having difficulties to get gnokii running with my HUAWEI E156g
modem on my Centos 6.x box:
Here is the output of _/gnokii --identify/_:
/GNOKII Version 0.6.30//
//LOG: debug mask is 0x1//
//Config read from file /etc/gnokiirc.//
//phone instance config://
//model = AT//
//port = /dev/ttyUSB1//
//connection = serial//
//initlength = default//
//serial_baudrate = 19200//
//serial_write_usleep = -1//
//handshake = software//
//require_dcd = 0//
//smsc_timeout = 10//
//rfcomm_channel = 0//
//sm_retry = 0//
//Initializing AT capable mobile phone ...//
//Serial device: opening device /dev/ttyUSB1//
//Serial device: setting RTS to high and DTR to high//
//Message sent: 0x00 / 0x0004//
//41 54 5a 0d | ATZ//
//write: [ATZ<cr>]//
//read : [^BOOT:22443556,0,0,0,86<cr><lf>ATZ<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x0023//
//02 5e 42 4f 4f 54 3a 32 32 34 34 33 35 35 36 2c | ^BOOT:22443556,//
//30 2c 30 2c 30 2c 38 36 0d 0a 41 54 5a 0d 0d 0a | 0,0,0,86 ATZ//
//4f 4b 0d | OK//
//Received message type 00//
//Message sent: 0x00 / 0x0005//
//41 54 45 31 0d | ATE1//
//write: [ATE1<cr>]//
//read : [ATE1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x000b//
//02 41 54 45 31 0d 0d 0a 4f 4b 0d | ATE1 OK//
//Received message type 00//
//Message sent: 0x00 / 0x000a//
//41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1//
//write: [AT+CMEE=1<cr>]//
//read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x0010//
//02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK//
//Received message type 00//
//Message sent: 0x06 / 0x0007//
//41 54 2b 47 4d 4d 0d | AT+GMM//
//write: [AT+GMM<cr>]//
//read : [AT+GMM<cr><cr><lf>E156G<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0016//
//02 41 54 2b 47 4d 4d 0d 0d 0a 45 31 35 36 47 0d | AT+GMM E156G//
//0a 0d 0a 4f 4b 0d | OK//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 4d 49 0d | AT+CGMI//
//write: [AT+CGMI<cr>]//
//read : [AT+CGMI<cr><cr><lf>huawei<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0018//
//02 41 54 2b 43 47 4d 49 0d 0d 0a 68 75 61 77 65 | AT+CGMI huawe//
//69 0d 0a 0d 0a 4f 4b 0d | i OK//
//Received message type 06//
//Message sent: 0x63 / 0x0009//
//41 54 2b 43 53 43 53 3f 0d | AT+CSCS?//
//write: [AT+CSCS?<cr>]//
//read : [AT+CSCS?<cr><cr><lf>+CSCS: "IRA"<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x63 / 0x001f//
//02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC//
//53 3a 20 22 49 52 41 22 0d 0a 0d 0a 4f 4b 0d | S: "IRA" OK//
//Received message type 63//
//Initialisation completed//
//Message sent: 0x06 / 0x0007//
//41 54 2b 47 4d 4d 0d | AT+GMM//
//write: [AT+GMM<cr>]//
//read : [AT+GMM<cr><cr><lf>E156G<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0016//
//02 41 54 2b 47 4d 4d 0d 0d 0a 45 31 35 36 47 0d | AT+GMM E156G//
//0a 0d 0a 4f 4b 0d | OK//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 4d 49 0d | AT+CGMI//
//write: [AT+CGMI<cr>]//
//read : [AT+CGMI<cr><cr><lf>huawei<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0018//
//02 41 54 2b 43 47 4d 49 0d 0d 0a 68 75 61 77 65 | AT+CGMI huawe//
//69 0d 0a 0d 0a 4f 4b 0d | i OK//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 4d 52 0d | AT+CGMR//
//write: [AT+CGMR<cr>]//
//read : [AT+CGMR<cr><cr><lf>11.608.05.00.156<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0022//
//02 41 54 2b 43 47 4d 52 0d 0d 0a 31 31 2e 36 30 | AT+CGMR 11.60//
//38 2e 30 35 2e 30 30 2e 31 35 36 0d 0a 0d 0a 4f | 8.05.00.156 O//
//4b 0d | K//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 53 4e 0d | AT+CGSN//
//write: [AT+CGSN<cr>]//
//read : [AT+CGSN<cr><cr><lf>358181022443556<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0021//
//02 41 54 2b 43 47 53 4e 0d 0d 0a 33 35 38 31 38 | AT+CGSN 35818//
//31 30 32 32 34 34 33 35 35 36 0d 0a 0d 0a 4f 4b | 1022443556 OK//
//0d |//
//Received message type 06//
//IMEI : 358181022443556//
//Hersteller : huawei//
//Kein Abschnitt flags in der Konfigurationsdatei.//
//Modell : E156G//
//Produktname: E156G//
//Revision : 11.608.05.00.156//
//Serial device: closing device/
So far so good, but no matter what other command I issue, I get a _CMS
500_ error.
For example if I issue the command _gnokii --getsms ME 1 end >
/home/admin/mymessages.txt_ I get this output:
/GNOKII Version 0.6.30//
//LOG: debug mask is 0x1//
//phone instance config://
//model = AT//
//port = /dev/ttyUSB1//
//connection = serial//
//initlength = default//
//serial_baudrate = 19200//
//serial_write_usleep = -1//
//handshake = software//
//require_dcd = 0//
//smsc_timeout = 10//
//rfcomm_channel = 0//
//sm_retry = 0//
//Initializing AT capable mobile phone ...//
//Serial device: opening device /dev/ttyUSB1//
//Serial device: setting RTS to high and DTR to high//
//Message sent: 0x00 / 0x0004//
//41 54 5a 0d | ATZ//
//write: [ATZ<cr>]//
//read : [^BOOT:22443556,0,0,0,86<cr><lf>ATZ<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x0023//
//02 5e 42 4f 4f 54 3a 32 32 34 34 33 35 35 36 2c | ^BOOT:22443556,//
//30 2c 30 2c 30 2c 38 36 0d 0a 41 54 5a 0d 0d 0a | 0,0,0,86 ATZ//
//4f 4b 0d | OK//
//Received message type 00//
//Message sent: 0x00 / 0x0005//
//41 54 45 31 0d | ATE1//
//write: [ATE1<cr>]//
//read : [ATE1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x000b//
//02 41 54 45 31 0d 0d 0a 4f 4b 0d | ATE1 OK//
//Received message type 00//
//Message sent: 0x00 / 0x000a//
//41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1//
//write: [AT+CMEE=1<cr>]//
//read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x0010//
//02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK//
//Received message type 00//
//Message sent: 0x06 / 0x0007//
//41 54 2b 47 4d 4d 0d | AT+GMM//
//write: [AT+GMM<cr>]//
//read : [AT+GMM<cr><cr><lf>E156G<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0016//
//02 41 54 2b 47 4d 4d 0d 0d 0a 45 31 35 36 47 0d | AT+GMM E156G//
//0a 0d 0a 4f 4b 0d | OK//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 4d 49 0d | AT+CGMI//
//write: [AT+CGMI<cr>]//
//read : [AT+CGMI<cr><cr><lf>huawei<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0018//
//02 41 54 2b 43 47 4d 49 0d 0d 0a 68 75 61 77 65 | AT+CGMI huawe//
//69 0d 0a 0d 0a 4f 4b 0d | i OK//
//Received message type 06//
//Message sent: 0x63 / 0x0009//
//41 54 2b 43 53 43 53 3f 0d | AT+CSCS?//
//write: [AT+CSCS?<cr>]//
//read : [AT+CSCS?<cr><cr><lf>+CSCS: "IRA"<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x63 / 0x001f//
//02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC//
//53 3a 20 22 49 52 41 22 0d 0a 0d 0a 4f 4b 0d | S: "IRA" OK//
//Received message type 63//
//Initialisation completed//
//Message sent: 0x1a / 0x000a//
//41 54 2b 43 50 4d 53 3d 3f 0d | AT+CPMS=?//
//write: [AT+CPMS=?<cr>]//
//read : [AT+CPMS=?<cr><cr><lf>+CPMS:
("ME","MT","SM","SR"),("ME","MT","SM","SR"),("ME","MT","SM","SR")<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x1a / 0x005c//
//02 41 54 2b 43 50 4d 53 3d 3f 0d 0d 0a 2b 43 50 | AT+CPMS=? +CP//
//4d 53 3a 20 28 22 4d 45 22 2c 22 4d 54 22 2c 22 | MS: ("ME","MT","//
//53 4d 22 2c 22 53 52 22 29 2c 28 22 4d 45 22 2c | SM","SR"),("ME",//
//22 4d 54 22 2c 22 53 4d 22 2c 22 53 52 22 29 2c | "MT","SM","SR"),//
//28 22 4d 45 22 2c 22 4d 54 22 2c 22 53 4d 22 2c | ("ME","MT","SM",//
//22 53 52 22 29 0d 0a 0d 0a 4f 4b 0d | "SR") OK//
//Received message type 1a//
//strings[0] = "ME"//
//strings[1] = "MT"//
//strings[2] = "SM"//
//strings[3] = "SR"//
//Message sent: 0x00 / 0x000d//
//41 54 2b 43 50 4d 53 3d 22 4d 45 22 0d | AT+CPMS="ME"//
//write: [AT+CPMS="ME"<cr>]//
//read : [^A^4+CPMS="ME"<cr><cr><lf>+CMS ERROR: 500<cr><lf>]//
//Message received: 0x00 / 0x0020//
//04 01 f4 2b 43 50 4d 53 3d 22 4d 45 22 0d 0d 0a | +CPMS="ME"//
//2b 43 4d 53 20 45 52 52 4f 52 3a 20 35 30 30 0d | +CMS ERROR: 500//
//Received message type 00//
//Getting message #1 from ME//
//Message sent: 0x00 / 0x000d//
//41 54 2b 43 50 4d 53 3d 22 4d 45 22 0d | AT+CPMS="ME"//
//write: [AT+CPMS="ME"<cr>]//
//read : [^A^4+CPMS="ME"<cr><cr><lf>+CMS ERROR: 500<cr><lf>]//
//Message received: 0x00 / 0x0020//
//04 01 f4 2b 43 50 4d 53 3d 22 4d 45 22 0d 0d 0a | +CPMS="ME"//
//2b 43 4d 53 20 45 52 52 4f 52 3a 20 35 30 30 0d | +CMS ERROR: 500//
//Received message type 00//
//Getting SMS failed (location 1 from ME memory)! (Unbekannter Fehler -
naja besser als garnichts!!)//
//Serial device: closing device//
/
Or if I try to send an SMS with the command _gnokii --sendsms
+43660xxxxxxx --smsc +4366000660_
/GNOKII Version 0.6.30//
//Konnte Konfigurationdatei /root/.config/gnokii/config nicht lesen//
//Konnte Konfigurationdatei /etc/xdg/gnokii/config nicht lesen//
//Konnte Konfigurationdatei /root/.gnokiirc nicht lesen//
//LOG: debug mask is 0x1//
//Config read from file /etc/gnokiirc.//
//Kann die Logdatei /root/.cache/gnokii/gnokii-errors nicht öffnen//
//WARNUNG: Kann die Logdatei nicht öffnen, Logs werden auf den Stderr
umgeleitet//
//phone instance config://
//model = AT//
//port = /dev/ttyUSB1//
//connection = serial//
//initlength = default//
//serial_baudrate = 19200//
//serial_write_usleep = -1//
//handshake = software//
//require_dcd = 0//
//smsc_timeout = 10//
//rfcomm_channel = 0//
//sm_retry = 0//
//Initializing AT capable mobile phone ...//
//Serial device: opening device /dev/ttyUSB1//
//Serial device: setting RTS to high and DTR to high//
//Message sent: 0x00 / 0x0004//
//41 54 5a 0d | ATZ//
//write: [ATZ<cr>]//
//read : [ATZ<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x000a//
//02 41 54 5a 0d 0d 0a 4f 4b 0d | ATZ OK//
//Received message type 00//
//Message sent: 0x00 / 0x0005//
//41 54 45 31 0d | ATE1//
//write: [ATE1<cr>]//
//read : [ATE1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x000b//
//02 41 54 45 31 0d 0d 0a 4f 4b 0d | ATE1 OK//
//Received message type 00//
//Message sent: 0x00 / 0x000a//
//41 54 2b 43 4d 45 45 3d 31 0d | AT+CMEE=1//
//write: [AT+CMEE=1<cr>]//
//read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x00 / 0x0010//
//02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d | AT+CMEE=1 OK//
//Received message type 00//
//Message sent: 0x06 / 0x0007//
//41 54 2b 47 4d 4d 0d | AT+GMM//
//write: [AT+GMM<cr>]//
//read : [AT+GMM<cr><cr><lf>E156G<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0016//
//02 41 54 2b 47 4d 4d 0d 0d 0a 45 31 35 36 47 0d | AT+GMM E156G//
//0a 0d 0a 4f 4b 0d | OK//
//Received message type 06//
//Message sent: 0x06 / 0x0008//
//41 54 2b 43 47 4d 49 0d | AT+CGMI//
//write: [AT+CGMI<cr>]//
//read : [AT+CGMI<cr><cr><lf>huawei<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x06 / 0x0018//
//02 41 54 2b 43 47 4d 49 0d 0d 0a 68 75 61 77 65 | AT+CGMI huawe//
//69 0d 0a 0d 0a 4f 4b 0d | i OK//
//Received message type 06//
//Message sent: 0x63 / 0x0009//
//41 54 2b 43 53 43 53 3f 0d | AT+CSCS?//
//write: [AT+CSCS?<cr>]//
//read : [AT+CSCS?<cr><cr><lf>+CSCS: "IRA"<cr><lf><cr><lf>OK<cr><lf>]//
//Message received: 0x63 / 0x001f//
//02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 | AT+CSCS? +CSC//
//53 3a 20 22 49 52 41 22 0d 0a 0d 0a 4f 4b 0d | S: "IRA" OK//
//Received message type 63//
//Initialisation completed//
//Bitte geben Sie den Nachrichtentext ein. Beendes Sie die Eingabe mit:
<cr><Strg-D>://
//This is a test=====> ENTER gn_sms_send()//
//General Data Coding//
//Default Alphabet//
// encoded size: 13//
// rawsms length: 14//
// rawsms user data length: 13//
//dcs: 0x00//
//Length: 0x0e//
//user_data_length: 0x0d//
//ValidityIndicator: 2//
//user_data: 54747A0E4ACF416110BD3CA703//
//Input is 14 characters long//
//SMS is 13 octets long//
//Number of extended alphabet chars: 0//
//Sending//
//Message sent: 0x65 / 0x000a//
//41 54 2b 43 4d 47 46 3d 30 0d | AT+CMGF=0//
//write: [AT+CMGF=0<cr>]//
//read :
[^BOOT:22443556,0,0,0,86<cr><lf><cr><lf>^BOOT:22443556,0,0,0,86<cr><lf>AT+CMGF=0<cr><cr><lf>OK<cr><lf>]//
//Message received: 0x65 / 0x0044//
//02 5e 42 4f 4f 54 3a 32 32 34 34 33 35 35 36 2c | ^BOOT:22443556,//
//30 2c 30 2c 30 2c 38 36 0d 0a 0d 0a 5e 42 4f 4f | 0,0,0,86 ^BOO//
//54 3a 32 32 34 34 33 35 35 36 2c 30 2c 30 2c 30 | T:22443556,0,0,0//
//2c 38 36 0d 0a 41 54 2b 43 4d 47 46 3d 30 0d 0d | ,86 AT+CMGF=0//
//0a 4f 4b 0d | OK//
//Received message type 65//
//PDU mode set//
//Sending initial sequence//
//Message sent: 0x66 / 0x000b//
//41 54 2b 43 4d 47 53 3d 32 37 0d | AT+CMGS=27//
//write: [AT+CMGS=27<cr>]//
//read : [AT+CMGS=27<cr><cr><lf>> ]//
//Message received: 0x66 / 0x000f//
//01 41 54 2b 43 4d 47 53 3d 32 37 0d 0d 0a 3e | AT+CMGS=27 >//
//Received message type 66//
//Got response: Kein Fehler.//
//Sending frame:
0691346600600611000C913466405063350000AA0E54747A0E4ACF416110BD3CA703//
//Message sent: 0x21 / 0x0045//
//30 36 39 31 33 34 36 36 30 30 36 30 30 36 31 31 | 0691346600600611//
//30 30 30 43 39 31 33 34 36 36 34 30 35 30 36 33 | 000C913466405063//
//33 35 30 30 30 30 41 41 30 45 35 34 37 34 37 41 | 350000AA0E54747A//
//30 45 34 41 43 46 34 31 36 31 31 30 42 44 33 43 | 0E4ACF416110BD3C//
//41 37 30 33 1a | A703//
//write:
[0691346600600611000C913466405063350000AA0E54747A0E4ACF416110BD3CA703^Z]//
//read :
[^A^491346600600611000C913466405063350000AA0E54747A0E4ACF416110BD3CA703<cr><lf>+CMS
ERROR: 500<cr><lf>]//
//Message received: 0x21 / 0x0057//
//04 01 f4 39 31 33 34 36 36 30 30 36 30 30 36 31 | 9134660060061//
//31 30 30 30 43 39 31 33 34 36 36 34 30 35 30 36 | 1000C91346640506//
//33 33 35 30 30 30 30 41 41 30 45 35 34 37 34 37 | 3350000AA0E54747//
//41 30 45 34 41 43 46 34 31 36 31 31 30 42 44 33 | A0E4ACF416110BD3//
//43 41 37 30 33 0d 0a 2b 43 4d 53 20 45 52 52 4f | CA703 +CMS ERRO//
//52 3a 20 35 30 30 0d | R: 500//
//Received message type 21//
//SMS senden fehlgeschlagen (Unbekannter Fehler - naja besser als
garnichts!!)//
//Serial device: closing device//
/
I read in the wiki that CMS Error 500 is an undefined error but should
have something to do with the network (no connection, etc.). But as I
get the same error when only reading SMS from the memory, I believe it
must be something different.
Anybody can help or do you think this is worth a bug report?
Best Regards,
Benedikt.
_______________________________________________
gnokii-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/gnokii-users
signature.asc
(application/pgp-signature, 553 B)
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS9MXSAAoJEOzv9t22Q/63418H/2sL03pDqqp7jADOySL75jnr aahcbAoKKY/Yu2izx0E03vHBK1Yi7NJ0XoBnVwpJuImtGuJQpN4AGaPaO9I0GljL bAEjRV4pIXMoSztaPtamAQzvHJbrzKYc+6MGglXydMkTa2Cnfek7oRe7BfCETh9b bj+5/0bQXfNbIith9dy1EQWQgUmUnTkKENN/ca1epmNfTbnq+9ryhIjAkthJvLar ofY1UyC2XnnhPwZXb6V4KADddng88pfd3JbFx8gs9owodyrSu5hMO49M7MhWR0Q4 azyPiZY6qi/imd2PnOetMpgfaEH5dsxHqn3K2z3E7xqJhFR5VPKdhcJ8hHHAbBw= =Ac9+ -----END PGP SIGNATURE-----