Re: phonet / capabilities

On Mon, Sep 29, 2014 at 10:55:14PM +0200, Daniele Forsi wrote:
> 2014-09-29 22:14 GMT+02:00 Raphaël Droz:
> 
> > sendto: No route to host
> 
> on some (most?) systems you need
> ifconfig usbpn0 up
> this is documented only in Docs/README-6510

indeed... --identify now works !
thank you !


As I now have both bluetooth, AT and phonet working, I noted these small
differences between AT (ttyACM) and phonet:


=========== using cdc-acm:

> IMEI         : X
> Manufacturer : Nokia
> Model        : Nokia 7230-1c
> Product name : Nokia 7230-1c
> Revision     : V 10.81

while the logs show:

> write: [AT+CGMR<cr>]
> read : [AT+CGMR<cr><cr><lf>V 10.81<cr><lf>28-02-11<cr><lf>RM-598<cr><lf>(c) Nokia            <cr><lf><cr><lf>OK<cr><lf>]

--identify lacks firmware date and RM-type although they are returned by
the phone.


=========== using cdc-phonet:

> IMEI         : X
> Manufacturer : Nokia
> Model        : RM-598
> Product name : RM-598
> Revision     : V 10.81

while the logs shows:

> Message sent: 0x1b / 0x0006
> 00 01 00 07 01 00                               |                 
> Message received: 0x1b / 0x003a
> 00 00 00 08 00 01 58 34 00 30 56 20 31 30 2e 38 |       X4 0V 10.8
> 31 0a 32 38 2d 30 32 2d 31 31 0a 52 4d 2d 35 39 | 1 28-02-11 RM-59
> 38 0a 28 63 29 20 4e 6f 6b 69 61 20 20 20 20 20 | 8 (c) Nokia     
> 20 20 20 20 20 20 20 0a 4c 00                   |         L

--identify lacks firmware date too.
Sadly the model can't be determined (it does not show up in the message
returned by the phone).


regards