Re: gnokii sendsms problem with special characters after ubuntu upgrade

Hi!

My model is USB. This is the debug output:

GNOKII Version 0.6.30
> LOG: debug mask is 0x1
> Config read from file gnokiirc-ttyUSB.
> phone instance config:
> model = AT
> port = /dev/ttyUSB60
> connection = serial
> initlength = default
> serial_baudrate = 19200
> serial_write_usleep = -1
> handshake = software
> require_dcd = 0
> smsc_timeout = 20
> rfcomm_channel = 0
> sm_retry = 0
> Initializing AT capable mobile phone ...
> Serial device: opening device /dev/ttyUSB60
> Serial device: setting RTS to high and DTR to high
> Message sent: 0x00 / 0x0004
> 41 54 5a 0d                                     | ATZ
> write: [ATZ<cr>]
> read : [ATZ<cr><cr><lf>OK<cr><lf>]
> Message received: 0x00 / 0x000a
> 02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
> Received message type 00
> Message sent: 0x00 / 0x0005
> 41 54 45 31 0d                                  | ATE1
> write: [ATE1<cr>]
> read : [OK<cr><lf>]
> Message received: 0x00 / 0x0004
> 02 4f 4b 0d                                     |  OK
> Received message type 00
> Message sent: 0x00 / 0x000a
> 41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
> write: [AT+CMEE=1<cr>]
> read : [OK<cr><lf>]
> Message received: 0x00 / 0x0004
> 02 4f 4b 0d                                     |  OK
> Received message type 00
> Message sent: 0x06 / 0x0007
> 41 54 2b 47 4d 4d 0d                            | AT+GMM
> write: [AT+GMM<cr>]
> read : [E303<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x000c
> 02 45 33 30 33 0d 0a 0d 0a 4f 4b 0d             |  E303    OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 49 0d                         | AT+CGMI
> write: [AT+CGMI<cr>]
> read : [OK<cr><lf>]
> Message received: 0x06 / 0x0004
> 02 4f 4b 0d                                     |  OK
> Received message type 06
> Message sent: 0x63 / 0x0009
> 41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
> write: [AT+CSCS?<cr>]
> read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
> Message received: 0x63 / 0x0010
> 02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
> Received message type 63
> Initialisation completed
> Message sent: 0x63 / 0x000a
> 41 54 2b 43 53 43 53 3d 3f 0d                   | AT+CSCS=?
> write: [AT+CSCS=?<cr>]
> read : [AT+GMM<cr><cr><lf>E303<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x63 / 0x0015
> 02 41 54 2b 47 4d 4d 0d 0d 0a 45 33 30 33 0d 0a |  AT+GMM   E303
> 0d 0a 4f 4b 0d                                  |   OK
> Received message type 63
> Message sent: 0x23 / 0x0009
> 41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?
> write: [AT+CSCA?<cr>]
> read : [+CSCA: "+54079000890",145<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x23 / 0x0021
> 02 2b 43 53 43 41 3a 20 22 2b 35 34 30 37 39 30 |  +CSCA: "+540790
> 30 30 38 39 30 22 2c 31 34 35 0d 0a 0d 0a 4f 4b | 00890",145    OK
> 0d                                              |
> Received message type 23
> Cannot read the SMSC number from your phone. If the sms send will fail,
> please use --smsc option explicitely giving the number.
> =====> ENTER gn_sms_send()
> General Data Coding
> Default Alphabet
> encoded size: 4
> rawsms length: 4
> rawsms user data length: 4
> dcs: 0x00
> Length: 0x04
> user_data_length: 0x04
> ValidityIndicator: 2
> user_data: FD77FF0D
> Input is 6 characters long
> SMS is 4 octets long
> Number of extended alphabet chars: 0
> Sending
> Message sent: 0x65 / 0x000a
> 41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0
> write: [AT+CMGF=0<cr>]
> read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
> Message received: 0x65 / 0x0010
> 02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK
> Received message type 65
> PDU mode set
> Sending initial sequence
> Message sent: 0x66 / 0x000b
> 41 54 2b 43 4d 47 53 3d 31 37 0d                | AT+CMGS=17
> write: [AT+CMGS=17<cr>]
> read : [AT+CMGS=17<cr><cr><lf>> ]
> Message received: 0x66 / 0x000f
> 01 41 54 2b 43 4d 47 53 3d 31 37 0d 0d 0a 3e    |  AT+CMGS=17   >
> Received message type 66
> Got response: No error.
> Sending frame: 0011000A8162403566000000AA04FD77FF0D
> Message sent: 0x21 / 0x0025
> 30 30 31 31 30 30 30 41 38 31 36 32 34 30 33 35 | 0011000A81624035
> 36 36 30 30 30 30 30 30 41 41 30 34 46 44 37 37 | 66000000AA04FD77
> 46 46 30 44 1a                                  | FF0D
> write: [0011000A8162403566000000AA04FD77FF0D^Z]
> read : [+CMGS: 143<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x21 / 0x0012
> 02 2b 43 4d 47 53 3a 20 31 34 33 0d 0a 0d 0a 4f |  +CMGS: 143    O
> 4b 0d                                           | K
> Received message type 21
> Send succeeded with reference -1!
> Serial device: closing device


My command
echo "ñoño" | gnokii --config gnokiirc-ttyUSB --sendsms 260453xxxx

My cellphone receive
")o )o"

Thanks a lot in advance. Regards...


Pablo Reyes
Blog: www.pabloreyes.com.ar

On Tue, Oct 20, 2015 at 7:37 PM, Daniele Forsi <[email protected]> wrote:

> Pablo Reyes wrote:
>
> > When migrate to Ubuntu 12 and gnokii v 0.6.30, special characters don't
> > work.
>
> the ñ is part of the Default GSM Alphabet so it must work with every
> device but we need to see the debug output to understand what is going
> wrong; it is enabled in your config with this:
> [logging]
> debug = on
>
> with model=AT it is easy to extract the PDU and then use the fake
> driver to decode it, see "Advanced usage " in
> http://wiki.gnokii.org/index.php/Fake_driver
> --
> Daniele Forsi
>
> _______________________________________________
> gnokii-users mailing list
> [email protected]
> https://lists.nongnu.org/mailman/listinfo/gnokii-users
>

_______________________________________________
gnokii-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/gnokii-users