Re: gnokii sendsms problem with special characters after ubuntu upgrade

any ideas? :(

Regards...


Pablo Reyes
Blog: www.pabloreyes.com.ar

On Fri, Oct 23, 2015 at 9:41 AM, Pablo Reyes <[email protected]> wrote:

> Hi!
>
> My model is USB. This is the debug output:
>
> GNOKII Version 0.6.30
>> LOG: debug mask is 0x1
>> Config read from file gnokiirc-ttyUSB.
>> phone instance config:
>> model = AT
>> port = /dev/ttyUSB60
>> connection = serial
>> initlength = default
>> serial_baudrate = 19200
>> serial_write_usleep = -1
>> handshake = software
>> require_dcd = 0
>> smsc_timeout = 20
>> rfcomm_channel = 0
>> sm_retry = 0
>> Initializing AT capable mobile phone ...
>> Serial device: opening device /dev/ttyUSB60
>> Serial device: setting RTS to high and DTR to high
>> Message sent: 0x00 / 0x0004
>> 41 54 5a 0d                                     | ATZ
>> write: [ATZ<cr>]
>> read : [ATZ<cr><cr><lf>OK<cr><lf>]
>> Message received: 0x00 / 0x000a
>> 02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK
>> Received message type 00
>> Message sent: 0x00 / 0x0005
>> 41 54 45 31 0d                                  | ATE1
>> write: [ATE1<cr>]
>> read : [OK<cr><lf>]
>> Message received: 0x00 / 0x0004
>> 02 4f 4b 0d                                     |  OK
>> Received message type 00
>> Message sent: 0x00 / 0x000a
>> 41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
>> write: [AT+CMEE=1<cr>]
>> read : [OK<cr><lf>]
>> Message received: 0x00 / 0x0004
>> 02 4f 4b 0d                                     |  OK
>> Received message type 00
>> Message sent: 0x06 / 0x0007
>> 41 54 2b 47 4d 4d 0d                            | AT+GMM
>> write: [AT+GMM<cr>]
>> read : [E303<cr><lf><cr><lf>OK<cr><lf>]
>> Message received: 0x06 / 0x000c
>> 02 45 33 30 33 0d 0a 0d 0a 4f 4b 0d             |  E303    OK
>> Received message type 06
>> Message sent: 0x06 / 0x0008
>> 41 54 2b 43 47 4d 49 0d                         | AT+CGMI
>> write: [AT+CGMI<cr>]
>> read : [OK<cr><lf>]
>> Message received: 0x06 / 0x0004
>> 02 4f 4b 0d                                     |  OK
>> Received message type 06
>> Message sent: 0x63 / 0x0009
>> 41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
>> write: [AT+CSCS?<cr>]
>> read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
>> Message received: 0x63 / 0x0010
>> 02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK
>> Received message type 63
>> Initialisation completed
>> Message sent: 0x63 / 0x000a
>> 41 54 2b 43 53 43 53 3d 3f 0d                   | AT+CSCS=?
>> write: [AT+CSCS=?<cr>]
>> read : [AT+GMM<cr><cr><lf>E303<cr><lf><cr><lf>OK<cr><lf>]
>> Message received: 0x63 / 0x0015
>> 02 41 54 2b 47 4d 4d 0d 0d 0a 45 33 30 33 0d 0a |  AT+GMM   E303
>> 0d 0a 4f 4b 0d                                  |   OK
>> Received message type 63
>> Message sent: 0x23 / 0x0009
>> 41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?
>> write: [AT+CSCA?<cr>]
>> read : [+CSCA: "+54079000890",145<cr><lf><cr><lf>OK<cr><lf>]
>> Message received: 0x23 / 0x0021
>> 02 2b 43 53 43 41 3a 20 22 2b 35 34 30 37 39 30 |  +CSCA: "+540790
>> 30 30 38 39 30 22 2c 31 34 35 0d 0a 0d 0a 4f 4b | 00890",145    OK
>> 0d                                              |
>> Received message type 23
>> Cannot read the SMSC number from your phone. If the sms send will fail,
>> please use --smsc option explicitely giving the number.
>> =====> ENTER gn_sms_send()
>> General Data Coding
>> Default Alphabet
>> encoded size: 4
>> rawsms length: 4
>> rawsms user data length: 4
>> dcs: 0x00
>> Length: 0x04
>> user_data_length: 0x04
>> ValidityIndicator: 2
>> user_data: FD77FF0D
>> Input is 6 characters long
>> SMS is 4 octets long
>> Number of extended alphabet chars: 0
>> Sending
>> Message sent: 0x65 / 0x000a
>> 41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0
>> write: [AT+CMGF=0<cr>]
>> read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
>> Message received: 0x65 / 0x0010
>> 02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK
>> Received message type 65
>> PDU mode set
>> Sending initial sequence
>> Message sent: 0x66 / 0x000b
>> 41 54 2b 43 4d 47 53 3d 31 37 0d                | AT+CMGS=17
>> write: [AT+CMGS=17<cr>]
>> read : [AT+CMGS=17<cr><cr><lf>> ]
>> Message received: 0x66 / 0x000f
>> 01 41 54 2b 43 4d 47 53 3d 31 37 0d 0d 0a 3e    |  AT+CMGS=17   >
>> Received message type 66
>> Got response: No error.
>> Sending frame: 0011000A8162403566000000AA04FD77FF0D
>> Message sent: 0x21 / 0x0025
>> 30 30 31 31 30 30 30 41 38 31 36 32 34 30 33 35 | 0011000A81624035
>> 36 36 30 30 30 30 30 30 41 41 30 34 46 44 37 37 | 66000000AA04FD77
>> 46 46 30 44 1a                                  | FF0D
>> write: [0011000A8162403566000000AA04FD77FF0D^Z]
>> read : [+CMGS: 143<cr><lf><cr><lf>OK<cr><lf>]
>> Message received: 0x21 / 0x0012
>> 02 2b 43 4d 47 53 3a 20 31 34 33 0d 0a 0d 0a 4f |  +CMGS: 143    O
>> 4b 0d                                           | K
>> Received message type 21
>> Send succeeded with reference -1!
>> Serial device: closing device
>
>
> My command
> echo "ñoño" | gnokii --config gnokiirc-ttyUSB --sendsms 260453xxxx
>
> My cellphone receive
> ")o )o"
>
> Thanks a lot in advance. Regards...
>
>
> Pablo Reyes
> Blog: www.pabloreyes.com.ar
>
> On Tue, Oct 20, 2015 at 7:37 PM, Daniele Forsi <[email protected]> wrote:
>
>> Pablo Reyes wrote:
>>
>> > When migrate to Ubuntu 12 and gnokii v 0.6.30, special characters don't
>> > work.
>>
>> the ñ is part of the Default GSM Alphabet so it must work with every
>> device but we need to see the debug output to understand what is going
>> wrong; it is enabled in your config with this:
>> [logging]
>> debug = on
>>
>> with model=AT it is easy to extract the PDU and then use the fake
>> driver to decode it, see "Advanced usage " in
>> http://wiki.gnokii.org/index.php/Fake_driver
>> --
>> Daniele Forsi
>>
>> _______________________________________________
>> gnokii-users mailing list
>> [email protected]
>> https://lists.nongnu.org/mailman/listinfo/gnokii-users
>>
>
>

_______________________________________________
gnokii-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/gnokii-users