gnokii configuration for Nokia 6230i on Ubuntu 16.04

Struggling to get *gnokii* to interface with my Nokia 6230i through USB
Nokia cable. Got past the serial device "Permission Denied" by changing
permissions "sudo chmod 777 /dev/ttyACM0" but then get either "Device or
resource busy" or "Initialization failed (6) - Telephone interface init
failed: Function or connection type not supported by the phone or by the
phone driver". Can anyone help understand what is missing? Is it an issue
with the cdc-acm driver and compatibility with phonet on my particular
Ubuntu build?

*gnokii --identify provides the following output:*

   1.

   *[for connection = serial]*
   GNOKII Version 0.6.31
   LOG: debug mask is 0x1
   Config read from file /home/****/.gnokiirc.
   phone instance config:
   model = AT
   port = /dev/ttyACM0
   connection = serial
   initlength = default
   serial_baudrate = 19200
   serial_write_usleep = -1
   handshake = software
   require_dcd = 0
   smsc_timeout = 10
   rfcomm_channel = 0
   sm_retry = 0
   Initializing AT capable mobile phone ...
   Serial device: opening device /dev/ttyACM0
   Gnokii serial_open: open: Device or resource busy
   Couldn't open ATBUS device: Device or resource busy
   AT bus initialization failed (1)
   Initialization failed (1)
   Serial device: closing device
   Telephone interface init failed: Command failed.
   Quitting.
   Command failed.

   *[for connection = phonet, dku2libusb, dlr3p, dku5, dku2, **dau9p]*

   GNOKII Version 0.6.31
   LOG: debug mask is 0x1
   Config read from file /home/danixeddu/.gnokiirc.
   phone instance config:
   model = AT
   port = /dev/ttyACM0
   connection = *phonet*
   initlength = default
   serial_baudrate = 19200
   serial_write_usleep = -1
   handshake = software
   require_dcd = 0
   smsc_timeout = 10
   rfcomm_channel = 0
   sm_retry = 0
   Initializing AT capable mobile phone ...
   Initialization failed (6)
   Serial device: closing device
   Telephone interface init failed: Function or connection type not
   supported by the phone or by the phone driver.
   Quitting.
   Function or connection type not supported by the phone or by the phone
   driver.


   *dmesg provides the following detail*

   [23446.450136] usb 1-1.2: new full-speed USB device number 12 using
   ehci-pci
   [23446.564904] usb 1-1.2: New USB device found, idVendor=0421,
   idProduct=0428
   [23446.564907] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
   SerialNumber=0
   [23446.564908] usb 1-1.2: Product: Nokia 6230i
   [23446.564910] usb 1-1.2: Manufacturer: Nokia
   [23446.614562] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device

   *gnokiirc config file looks like this (non #lines):*


   [global]
   port = /dev/ttyACM0
   model = AT
   initlength = default
   connection = phonet (also tried serial, dku2libusb, dlr3p, dku5, dku2,
   dau9p*)*
   use_locking = yes
   serial_baudrate = 19200
   smsc_timeout = 10

   [xgnokii]
   allow_breakage = 0

   [gnokiid]
   bindir = /usr/local/sbin/

   [connect_script]
   TELEPHONE = 12345678

   [debuging]
   debug = on
   rlpdebug = off
   xdebug = off

   [phone_fake]
   port = foobar
   model = fake
   connection = serial

   [fake_driver]
   sms_inbox = /tmp/sms

_______________________________________________
gnokii-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/gnokii-users