[PATCH v2 04/11] nl80211: rename nl_connect to nl_connect_and_ctrl

Markus Theil <[email protected]>
Newsgroups gmane.linux.drivers.hostap
Message-ID <[email protected]>
This patch is another preparation for rx over nl80211 control port.
Besides the already used SOCKET_OWNER marking on interfaces, ctrl-port
rx also sets a SOCKET_OWNER flag on the actual connect/associate or
start AP. Afterwards, some operations can only be performed over the
socket which set the owner flag initially.

Signed-off-by: Markus Theil <[email protected]>
---
 src/drivers/driver_nl80211.c | 52 ++++++++++++++++++------------------
 src/drivers/driver_nl80211.h |  2 +-
 2 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index 3b7c31c89..b1f70d9fe 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -2162,17 +2162,17 @@ static int nl80211_register_action_frame(struct i802_bss *bss,
 
 static int nl80211_init_connect_handle(struct i802_bss *bss)
 {
-	if (bss->nl_connect) {
+	if (bss->nl_connect_or_ctrl) {
 		wpa_printf(MSG_DEBUG,
-			   "nl80211: Connect handle already created (nl_connect=%p)",
-			   bss->nl_connect);
+			   "nl80211: Connect handle already created (nl_connect_or_ctrl=%p)",
+			   bss->nl_connect_or_ctrl);
 		return -1;
 	}
 
-	bss->nl_connect = nl_create_handle(bss->nl_cb, "connect");
-	if (!bss->nl_connect)
+	bss->nl_connect_or_ctrl = nl_create_handle(bss->nl_cb, "connect");
+	if (!bss->nl_connect_or_ctrl)
 		return -1;
-	nl80211_register_eloop_read(&bss->nl_connect,
+	nl80211_register_eloop_read(&bss->nl_connect_or_ctrl,
 				    wpa_driver_nl80211_event_receive,
 				    bss->nl_cb, 1);
 	return 0;
@@ -2830,8 +2830,8 @@ static void wpa_driver_nl80211_deinit(struct i802_bss *bss)
 		nl80211_del_p2pdev(bss);
 	}
 
-	if (bss->nl_connect)
-		nl80211_destroy_eloop_handle(&bss->nl_connect, 1);
+	if (bss->nl_connect_or_ctrl)
+		nl80211_destroy_eloop_handle(&bss->nl_connect_or_ctrl, 1);
 
 	nl80211_destroy_bss(drv->first_bss);
 
@@ -3376,7 +3376,7 @@ static int nl80211_set_conn_keys(struct wpa_driver_associate_params *params,
 int wpa_driver_nl80211_mlme(struct wpa_driver_nl80211_data *drv,
 			    const u8 *addr, int cmd, u16 reason_code,
 			    int local_state_change,
-			    struct nl_sock *nl_connect)
+			    struct nl_sock *nl_connect_or_ctrl)
 {
 	int ret;
 	struct nl_msg *msg;
@@ -3390,8 +3390,8 @@ int wpa_driver_nl80211_mlme(struct wpa_driver_nl80211_data *drv,
 		return -1;
 	}
 
-	if (nl_connect)
-		ret = send_and_recv(drv->global, nl_connect, msg, NULL, NULL);
+	if (nl_connect_or_ctrl)
+		ret = send_and_recv(drv->global, nl_connect_or_ctrl, msg, NULL, NULL);
 	else
 		ret = send_and_recv_msgs(drv, msg, NULL, NULL);
 	if (ret) {
@@ -3405,7 +3405,7 @@ int wpa_driver_nl80211_mlme(struct wpa_driver_nl80211_data *drv,
 
 static int wpa_driver_nl80211_disconnect(struct wpa_driver_nl80211_data *drv,
 					 u16 reason_code,
-					 struct nl_sock *nl_connect)
+					 struct nl_sock *nl_connect_or_ctrl)
 {
 	int ret;
 	int drv_associated = drv->associated;
@@ -3414,7 +3414,7 @@ static int wpa_driver_nl80211_disconnect(struct wpa_driver_nl80211_data *drv,
 	nl80211_mark_disconnected(drv);
 	/* Disconnect command doesn't need BSSID - it uses cached value */
 	ret = wpa_driver_nl80211_mlme(drv, NULL, NL80211_CMD_DISCONNECT,
-				      reason_code, 0, nl_connect);
+				      reason_code, 0, nl_connect_or_ctrl);
 	/*
 	 * For locally generated disconnect, supplicant already generates a
 	 * DEAUTH event, so ignore the event from NL80211.
@@ -3437,12 +3437,12 @@ static int wpa_driver_nl80211_deauthenticate(struct i802_bss *bss,
 		return nl80211_leave_ibss(drv, 1);
 	}
 	if (!(drv->capa.flags & WPA_DRIVER_FLAGS_SME)) {
-		struct nl_sock *nl_connect = NULL;
+		struct nl_sock *nl_connect_or_ctrl = NULL;
 
 		if (bss->use_nl_connect)
-			nl_connect = bss->nl_connect;
+			nl_connect_or_ctrl = bss->nl_connect_or_ctrl;
 		return wpa_driver_nl80211_disconnect(drv, reason_code,
-						     nl_connect);
+						     nl_connect_or_ctrl);
 	}
 	wpa_printf(MSG_DEBUG, "%s(addr=" MACSTR " reason_code=%d)",
 		   __func__, MAC2STR(addr), reason_code);
@@ -5920,7 +5920,7 @@ static int nl80211_connect_common(struct wpa_driver_nl80211_data *drv,
 static int wpa_driver_nl80211_try_connect(
 	struct wpa_driver_nl80211_data *drv,
 	struct wpa_driver_associate_params *params,
-	struct nl_sock *nl_connect)
+	struct nl_sock *nl_connect_or_ctrl)
 {
 	struct nl_msg *msg;
 	enum nl80211_auth_type type;
@@ -5985,8 +5985,8 @@ skip_auth_type:
 	if (ret)
 		goto fail;
 
-	if (nl_connect)
-		ret = send_and_recv(drv->global, nl_connect, msg,
+	if (nl_connect_or_ctrl)
+		ret = send_and_recv(drv->global, nl_connect_or_ctrl, msg,
 				    NULL, (void *) -1);
 	else
 		ret = send_and_recv_msgs(drv, msg, NULL, (void *) -1);
@@ -6011,7 +6011,7 @@ fail:
 static int wpa_driver_nl80211_connect(
 	struct wpa_driver_nl80211_data *drv,
 	struct wpa_driver_associate_params *params,
-	struct nl_sock *nl_connect)
+	struct nl_sock *nl_connect_or_ctrl)
 {
 	int ret;
 
@@ -6021,7 +6021,7 @@ static int wpa_driver_nl80211_connect(
 	else
 		os_memset(drv->auth_attempt_bssid, 0, ETH_ALEN);
 
-	ret = wpa_driver_nl80211_try_connect(drv, params, nl_connect);
+	ret = wpa_driver_nl80211_try_connect(drv, params, nl_connect_or_ctrl);
 	if (ret == -EALREADY) {
 		/*
 		 * cfg80211 does not currently accept new connections if
@@ -6032,9 +6032,9 @@ static int wpa_driver_nl80211_connect(
 			   "disconnecting before reassociation "
 			   "attempt");
 		if (wpa_driver_nl80211_disconnect(
-			    drv, WLAN_REASON_PREV_AUTH_NOT_VALID, nl_connect))
+			    drv, WLAN_REASON_PREV_AUTH_NOT_VALID, nl_connect_or_ctrl))
 			return -1;
-		ret = wpa_driver_nl80211_try_connect(drv, params, nl_connect);
+		ret = wpa_driver_nl80211_try_connect(drv, params, nl_connect_or_ctrl);
 	}
 	return ret;
 }
@@ -6059,19 +6059,19 @@ static int wpa_driver_nl80211_associate(
 	if (!(drv->capa.flags & WPA_DRIVER_FLAGS_SME)) {
 		enum nl80211_iftype nlmode = params->p2p ?
 			NL80211_IFTYPE_P2P_CLIENT : NL80211_IFTYPE_STATION;
-		struct nl_sock *nl_connect = NULL;
+		struct nl_sock *nl_connect_or_ctrl = NULL;
 
 		if (wpa_driver_nl80211_set_mode(priv, nlmode) < 0)
 			return -1;
 		if (params->key_mgmt_suite == WPA_KEY_MGMT_SAE ||
 		    params->key_mgmt_suite == WPA_KEY_MGMT_FT_SAE) {
-			nl_connect = bss->nl_connect;
+			nl_connect_or_ctrl = bss->nl_connect_or_ctrl;
 			bss->use_nl_connect = 1;
 		} else {
 			bss->use_nl_connect = 0;
 		}
 
-		return wpa_driver_nl80211_connect(drv, params, nl_connect);
+		return wpa_driver_nl80211_connect(drv, params, nl_connect_or_ctrl);
 	}
 
 	nl80211_mark_disconnected(drv);
diff --git a/src/drivers/driver_nl80211.h b/src/drivers/driver_nl80211.h
index 6e6c87247..f3513b369 100644
--- a/src/drivers/driver_nl80211.h
+++ b/src/drivers/driver_nl80211.h
@@ -73,7 +73,7 @@ struct i802_bss {
 	int if_dynamic;
 
 	void *ctx;
-	struct nl_sock *nl_preq, *nl_mgmt, *nl_connect;
+	struct nl_sock *nl_preq, *nl_mgmt, *nl_connect_or_ctrl;
 	struct nl_cb *nl_cb;
 
 	struct nl80211_wiphy_data *wiphy_data;
-- 
2.26.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.