PRISM2_IOCTL_PRISM2_PARAM

Hi,

Configured for an AP to authenticate STA(tions) via RADIUS:

     # cat /etc/hostapd.conf | grep ^[^#]
    interface=eth0
    logger_syslog=-1
    logger_syslog_level=2
    logger_stdout=-1
    logger_stdout_level=2
    ctrl_interface=/var/run/hostapd
    ctrl_interface_group=0
    ieee8021x=1
    eapol_version=2
    eapol_key_index_workaround=0
    eap_reauth_period=3600
    own_ip_addr=192.168.200.236
    auth_server_addr=192.168.200.120
    auth_server_port=1812
    auth_server_shared_secret=*secret*


Results in errors:


    # hostapd /etc/hostapd.conf -dd
    random: Trying to read entropy from /dev/random
    Configuration file: /etc/hostapd.conf
    ctrl_interface_group=0
    eapol_version=2
    ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Invalid argument
    Could not enable hostapd mode for interface eth0
    hostap driver initialization failed.
    hostapd_interface_deinit_free(0xd7b90)
    hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1
    hostapd_interface_deinit(0xd7b90)
    eth0: interface state UNINITIALIZED->DISABLED
    hostapd_bss_deinit: deinit bss eth0
    eth0: AP-DISABLED
    hostapd_cleanup(hapd=0xdb220 (eth0))
    eth0: CTRL-EVENT-TERMINATING
    hostapd_free_hapd_data: Interface eth0 wasn't started
    hostapd_interface_deinit_free: driver=(nil) drv_priv=(nil) ->
    hapd_deinit
    hostapd_interface_free(0xd7b90)
    hostapd_interface_free: free hapd 0xdb220
    hostapd_cleanup_iface(0xd7b90)
    hostapd_cleanup_iface_partial(0xd7b90)
    hostapd_cleanup_iface: free iface=0xd7b90


Why is 'PRISM2_IOCTL_PRISM2_PARAM' used athough  wired interface is
configured? How to solve this?

Thanks,

Erwin


_______________________________________________
Hostap mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/hostap