Re: Q: hostapd fails for AP with 2 SSID on Intel 7260
Toerless Eckert <[email protected]> Sun, 14 Jun 2020 22:42:55 +0200
| Newsgroups | gmane.linux.drivers.hostap |
|---|---|
| Message-ID | <[email protected]> |
Thank a lot. Will give it a try.
Are there actually any mini PCIe cards that actually have indendent
2.4 vs. 5 Ghz radios, aka: where i can use both 2.4 and 5 Ghz in
parallel like i know it from many professional APs ?
Cheers
toerless
On Sun, Jun 14, 2020 at 10:05:19PM +0200, Andreas Tobler wrote:
> On 14.06.20 21:24, Toerless Eckert wrote:
> > Hah. yes, also just found:
> >
> > http://wiki.stocksy.co.uk/wiki/Multiple_SSIDs_with_hostapd
> >
> > Some better diagnostics from hostapd would be great.
> >
> > Any suggestion for a 5G capable mini PCIe card with multiple SSIDs ?
>
> e.g: wle600vx
>
> valid interface combinations:
> * #{ AP, mesh point } <= 8, #{ managed } <= 1,
> total <= 8, #channels <= 1, STA/AP BI must match,
> radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz }
>
> Works very well with vanilla Linux kernel and stock firmware (10.2.4.70.70
> api5).
>
> Hth,
> Andreas
--
---
[email protected]