Re: Problems with PSC1350 and REDHAT

When creating the printer port make sure you are not using just an USB
port but a ptal managed USB port. For example mlc:usb://device... You
can do this by running #ptal-init setup. Restart CUPS, then use the web
interface http://localhost:631 to configure the printer. Be sure to
choose the right port.

Cory
hp linux printing team

On Mon, 2004-05-10 at 07:03, Gérard Delafond wrote:
> Le dimanche 9 Mai 2004 13:15, Joao Paulo Sinnecker a écrit :
> > Hi there,
> >
> > I am just starting to use Linux in my desktop, and decided to give a try
> > with REDHAT 9. The installation was really smoth, and I got almost all
> > working except the printer (at am stucked at this point).
> >
> > I have a HP PSC 1350 Multifunctional. After a quick research over the web,
> > I found some instructions on how to proceed with this printer and Linux
> > using the hpijs drivers. I followed the instructions carefully with hpijs
> > 1.6:
> >
> > 1) Have the tar driver downloaded
> > 2) untared driver
> > 3) move to untared directory (hpijs-1.6)
> > 4) run ./configure from prompt
> > 5) run make
> > 6) login as su
> > 7) run make install
> > 8) verified intallation with hpijs -h
> >
> > After that I tryed to add the printer. The system identified correctly my
> > printer (hp 1300 series appears beside the printer mounting path) but when
> > I try to select the right Printer from teh HP list, the printer is missing!
> Did you install the ppd ?
> >
> > Some could shine some light on his subject? Am I doing something wrong?
> > I just want to add that I am completely new to Linux, and have almost not
> > any idea of any line commands, file structures, etc, etc. Sorry for the
> > lousy English to..
> >
> > Thanks,
> >
> > J.Paulo Sinnecker
> >
> Gerard
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by Sleepycat Software
> Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to 
> deliver higher performing products faster, at low TCO.
> http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
> 
> _______________________________________________
> hpoj-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel
---------------------------------------------------------------------------- Cory Meisch ( [email protected] )
Linux Technician 
HP Linux Printing Team 
Vancouver, WA 
(360) 212-7009 
---------------------------------------------------------------------------- Tuesday May 25 2004 11:00:56 PDT 
My Kernel: 2.6.5-gentoo 
My uptime: 11:00:56 up 2:25, 4 users, load average: 2.84, 2.40, 1.87 
My Weather: The current temperature for Portland is 63 degrees with Fair
conditions 
----------------------------------------------------------------------------



-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id149&alloc_id66&op=click