Getting the HP 4215xi to work

I got this working finally.  I'm not really sure what did it, but I
think it is because I used the redhat-config-printer-gui tool.  It
didn't seem to like using the cups only method.

I did have to reboot to make it work, but I think it was because of the
upgrading of libusb, and other items.

I am using FC1 with the rawhide rpm for hpoj.  Here is a list a relevant
rpms that I had downloaded to make it work:

cups-1.1.19-13
hpoj-0.91-7
hpijs_1.5-4.2
ghostscript_7.07-15.2
foomatic_3.0.0-21.3
usbutils_0.11-2.1
usbview_1.0-10
libusb-devel_0.1.7-3
libusb_0.1.7-3

I was using apt-get so if there were any dependecies, they were
installed as well

I fooled around a bit before rebooting, but after rebooting, I went
through the instructions once more and everything worked.

I did use the redhat-config-printer tool to create the printer.  I
choose the HP 4115 and all the settings that the instructions say to
use. 

Hope this helps someone else.

-- 
Barsalou <[email protected]>



-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
Project Admins to receive an Apple iPod Mini FREE for your judgement on
who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php