Re: troubles with PSC 1300 series

On Mon, 2004-10-11 at 14:22, bbales wrote:
> On Monday 11 October 2004 10:24, David Medberry wrote:
> > I initially had difficulty due to some conflict with printer.o (with my
> > PSC 1350).  After I got the latest bits and built it myself, this
> > conflict is resolved.  Prior to doing that, I had to:
> > ptal-init stop
> > stop cups (/etc/init.d/cupsys stop)
> > rmmod printer
> > restart cups
> > restart ptal-init
> >
> > Then I could print. 
> 
> I'm running RH-9 and /etc/init.d/cupsys  does not exist, so this didn't work.  
> No cupsys on the system.  /usr/sbin/cupsd stop didn't work  ("unknown 
> argument").  
> 

On RH should be /etc/init.d/cupsd

> > Try the latest bits though first if you haven't
> > (and I'd suggest build it yourself instead of using pre-packaged
> > bits--that's more likely to reflect your current configuration.)
> 
> I don't have any idea what "bits" are or what this means.
> bruce
> 

bits in the case is either the latest RPM or download and build the
latest CVS source from hpoj.sf.net

Cory

> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
> Use IT products in your business? Tell us what you think of them. Give us
> Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
> http://productguide.itmanagersjournal.com/guidepromo.tmpl
> 
> _______________________________________________
> hpoj-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel


-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl