Re: Problems with 1.1.3 and WPA
Nick Bower <[email protected]>
| Newsgroups | gmane.linux.drivers.ipw2100.devel |
|---|---|
| Message-ID | <[email protected]> |
> What does iwlist scan show for this AP?
>
> Thanks,
> -yi
eth1 Scan completed :
Cell 01 - Address: 00:13:C3:F0:87:E0
ESSID:"<hidden>"
Protocol:IEEE 802.11bg
Mode:Master
Channel:7
Encryption key:on
Bit Rate:1 Mb/s
Bit Rate:2 Mb/s
Bit Rate:5.5 Mb/s
Bit Rate:6 Mb/s
Bit Rate:9 Mb/s
Bit Rate:11 Mb/s
Bit Rate:12 Mb/s
Bit Rate:18 Mb/s
Bit Rate:24 Mb/s
Bit Rate:36 Mb/s
Bit Rate:48 Mb/s
Bit Rate:54 Mb/s
Quality=83/100 Signal level=-47 dBm
(Unknown Wireless Token 0x8C05)
(Unknown Wireless Token 0x8C05)
Extra: Last beacon: 736ms ago
It's a Cisco Aironet 1200 series with WPA2/AES.
I've now just got this working by rebuilding the latest wpa_supplicant package
and after alot of trying everything, a difference is made by removing 2 lines
in the following config;
network={
proto=RSN
scan_ssid=1
key_mgmt=WPA-PSK
ssid="xxxx"
psk="xxxxxxxxxxx"
# pairwise=CCMP
# group=CCMP
}
If these two lines are present, then I get repeated scanning with cypher
mis-matches. Maybe the wpa_supplicant has probably fallen back to WPA?
(This WPA2->WPA fallback seems to be mentioned when tracking back through the
wpa_supplicant Changelog @0.4.6).
On Thu, 13 Jul 2006 10:03 am, Zhu Yi wrote:
> On Wed, 2006-07-12 at 17:36 +0800, Nick Bower wrote:
> > WPA: Failed to parse WPA IE from association info
> > WPA: Set cipher suites based on configuration
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642