Re: ipw2100
Pedro Ramalhais <[email protected]>
| Newsgroups | gmane.linux.drivers.ipw2100.devel |
|---|---|
| Message-ID | <[email protected]> |
Kasper Monrad wrote: > Pedro Ramalhais <ramalhais <at> serrado.net> writes: > > >> You have to add and IP to the interface before you route through that >> gateway IP. >> ifconfig eth2 192.168.1.2 >> and then ip route add default via 192.168.1.1 >> >> > > Sorry, it did not fix my problem at all. > I see it adds the right route (by running "sudo route -n" and comparing to the 1 > the wired eth1 produces - they're identical!) but it still does not work! > > I'm desperate!! > > -- > Regards Kasper > I don't remember your exact problem (you have cut your part of the conversation), but if you have more than one interface on the same network, only one will be used to route the packets to that network, so, make sure the only interface on that network is the one you want. ifconfig eth1 0.0.0.0 -- Pedro Ramalhais ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/