Re: problem on mandrake 10.0

I had the same problem some time ago
also with my mandrake 10 comunity edition and my supraexpress modem(I
remember, now I dont use a telephone modem).

I tried to change the country code (even to a diferent to my country)
and sometimes it worked.
Also, someone suggest me using a initialization command I cant remember
right now, to turn off the busy line test before dialing (perphaps
something like atxN with N a number 0,1,2,3). Look for AT commands and
try.
This last solution worked better for me.
Sorry I cant remember exactly how it was.



 --- "Linuxant support (Jonathan)" <[email protected]> escribió: 
> Hi,
> 
> it is possible that all these problems are related to 'udev' which is
> 
> present on Mandrakelinux 10. Please try with the latest version of
> the 
> HCF PCI driver, this new version adds improved support for 'udev'.
> You 
> can download this new release of the HCF driver download page at :
> 
> http://www.linuxant.com/drivers/hcf/full/downloads.php
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> [email protected]
> 
> 
> [email protected] wrote:
> > Hello,
> > 
> > After a fresh installation of Mandrake 10.0 Official (plus
> updates), I have 
> > discovered that my old Rockwell/Conexant internal modem would work
> with a 
> > linuxant HCF driver. After installing the following,
> > hcfpcimodem-1.01lnxt04111200full_k2.6.3_7mdk-1mdk.i586. 
> >
>
<http://www.linuxant.com/drivers/hcf/full/archive/hcfpcimodem-1.01lnxt04111200full/hcfpcimodem-1.01lnxt04111200full_k2.6.3_7mdk-1mdk.i586.rpm.zip?PHPSESSID=0b1d275682bd5b98ec46fd04e0e72b8e>rpm
> 
> >
>
<http://www.linuxant.com/drivers/hcf/full/archive/hcfpcimodem-1.01lnxt04111200full/hcfpcimodem-1.01lnxt04111200full_k2.6.3_7mdk-1mdk.i586.rpm.zip?PHPSESSID=0b1d275682bd5b98ec46fd04e0e72b8e>
> > I was able to go online without any problem. However, after my next
> system 
> > bootup, the modem was no longer accessible. Yet the command
> > % rchcfpci restart
> > made the module again active. Now the problem is that the modem
> _always_ returns 
> > the signal BUSY after dialling. I have made all possible efforts to
> solve this 
> > issue (reinstalling, compiling, disabling acpi and apic, etc), all
> to no avail. 
> > Internet searches likewise did not yield any useful hint.
> > 
> > Does anyone have any idea? I hope I could avoid buying a
> non-winmodem, since I 
> > need to use dialup access only for a few months.
> > 
> > Thanks in advance
> > 
> > François C
> > 
> > 
> >
>
------------------------------------------------------------------------
> > 
> > _______________________________________________
> > hcflinux mailing list
> > [email protected]
> > https://www.linuxant.com/mailman/listinfo/hcflinux
> _______________________________________________
> hcflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hcflinux
>  


		
______________________________________________
Renovamos el Correo Yahoo!: ¡100 MB GRATIS!
Nuevos servicios, más seguridad
http://correo.yahoo.es