Re: hcfusb modem not detected on ibook G4 kernel 2.6.7
"Linuxant support (Jonathan)" <[email protected]> Mon, 22 Nov 2004 10:39:20 +0000
| Newsgroups | gmane.linux.drivers.modem.hcf |
|---|---|
| Organization | Linuxant Inc. |
| Message-ID | <[email protected]> |
Hi, the problem is that we do not see your modem in the output of the 'lsusb' command even after you have inserted the HCF USB driver modules into the kernel. As long as you do not see your modem in the output of the previous command, you will be unable to use the modem driver. It is important to note that the modem will only appear in your 'lsusb' after you have inserted the modules into the kernel. Also, this driver only supports USB modems based on the HCF Conexant chipset. If you have a supported modem, it is possible that the problem is the kernel. In this case, please try with different versions of the kernel to see if there is a difference. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Anton Roeder wrote: > Hello, > > I am running debian with kernel 2.6.7 on an ibook G4 which has a builtin > hcfusb modem. > > After installing the driver (version 1.01lnxt04111500powerpcfull), > hcfusbconfig tells me: > > ERROR: no device detected by hcfusb driver > > trying to establish a connection with "pon <provider>" gives the > following error > > Nov 20 13:20:50 eibuch chat[3572]: Can't get terminal parameters: > Input/output error > > I haven't tried other forms of accessing the modem yet (minicom, wvdial) > but I don't see much sense in it either. > > Also I haven't had the chance to try other kernel versions, which I will > do as soon as they are done downloading. > I'd be happy about experiences with this constellation of system/driver > and about any hints what might be the problem (even if it's just > confirmation that I should run a different kernel :o)) > > Attached is the output of hcfusbconfig --dumpiag. > I had a look at it and noticed that there doesn't seem to be any modem > recognized on the USB-bus (neither on PCI of course), which corresponds > with the error message given by hcfusbconfig. > > Thanx in advance. > > Greetings > > Anton Roeder > _______________________________________________ > hcflinux mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/hcflinux