Re: (no subject)

Hi,

it seems that you are able to connect but as soon as the connection is 
established, you are disconnected for an unknown reason. Please try to 
use the 'AT &F' as the only init. string to see if there is a 
difference. You could try with another dialing program as well.

If you require more assistance, just after a failed attempt to connect, 
please send at [email protected] the output of the following commands 
in a root shell:

---
dmesg
cat /proc/driver/h*/0/lastcallstatus
---

This information will help us solve this problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Spearman, Peter wrote:
> Cannot connect to UK BT dialup. I've obtained license key for 56 K too. 
> Not a Linux expert - seems driver loaded ok but not communicating with 
> server. Don't know what to do - any help appreciated. Here's the 
> connection log:
> 
> SuSE Meta pppd (smpppd-ifcfg), Version 1.50 on linux.
> 
> Status is: disconnected
> 
> trying to connect to smpppd
> 
> connect to smpppd
> 
> Status is: disconnected
> 
> Status is: connecting
> 
> pppd[0]: Plugin passwordfd.so loaded.
> 
> pppd[0]: --> WvDial: Internet dialer version 1.54.0
> 
> pppd[0]: --> Initializing modem.
> 
> pppd[0]: --> Sending: ATZ
> 
> pppd[0]: ATZ
> 
> pppd[0]: OK
> 
> pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> 
> pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> 
> pppd[0]: OK
> 
> pppd[0]: --> Sending: ATM1
> 
> pppd[0]: ATM1
> 
> pppd[0]: OK
> 
> pppd[0]: --> Modem initialized.
> 
> pppd[0]: --> Sending: ATDT08457560000
> 
> pppd[0]: --> Waiting for carrier.
> 
> pppd[0]: ATDT08457560000
> 
> pppd[0]: CONNECT 57600
> 
> pppd[0]: --> Carrier detected. Waiting for prompt.
> 
> pppd[0]: NO CARRIER
> 
> pppd[0]: --> Don't know what to do! Starting pppd and hoping for the best.
> 
> pppd[0]: Serial connection established.
> 
> pppd[0]: Renamed interface ppp0 to modem0
> 
> pppd[0]: Using interface modem0
> 
> Status is: connecting
> 
> pppd[0]: Connect: modem0 <--> /dev/modem
> 
> pppd[0]: Serial line is looped back.
> 
> pppd[0]: Connection terminated.
> 
> Status is: disconnected
> 
> pppd[0] died: Loopback detected (exit code 17)
> 
>  
> 
> 
> This email has been scanned for all viruses by the MessageLabs Email
> Security System.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> hcflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hcflinux