Re: Semi-success with a "no name" modem

Hi,

you could also try to use the 'AT &F X1' init. string to see if there is 
a difference.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Andreas U. Trottmann wrote:
> On Thu, Mar 16, 2006 at 11:31:21AM -0500, Linuxant support (Jonathan) wrote:
> 
> 
>>please make sure that the right country is selected with the 
>>'hcfpciconfig --country' command in a root shell. You could also test 
>>this modem under Windows XP just to make sure that the modem is working 
>>fine.
> 
> 
> Thank you for your fast reply, and sorry for the delay in my
> reply. Indeed the right country ("SWITZERLAND") is selected. I've
> tentatively set it to "GERMANY" to see if it makes a difference,
> but it doesn't.
> 
> I'll check if it's possible to test it in a Windows XP box - I
> don't have that many of them :-)
> 
> 
>>If you require more assistance, please send at [email protected] the 
>>output of 'dumpdiag'. Type the following in a root shell:
>>
>>---
>>hcfpciconfig --dumpdiag
>>---
>>
>>Just send us the generated file located in /tmp ('hcfdiag.txt').
>>It'll help us solve the problem.
> 
> 
> I will eventually do that, but before, I will try some other
> things first, including using a "standard" Debian kernel instead
> of the custom one I'm using now, and also removing other hardware
> from the box to see whether there is some cross-influence.
> 
> Thank you very much for your assistance so far,
> 
>