hcfpcimodem-1.10 and Hylafax

I have just configured Hylafax 4.2.5 + hcfpcimodem-1.10 + the following
modem:

     Config for modem unit 0: /dev/ttySHCF0
             Device instance: 0-PCI-14f1:1033-1092:0abe
             HW revision    : DP Part '74' Rev 'BA' Asic ID 0x85
             HW profile name: hcfpciv90

Hylafax's configuration script reported =ABThere is no prototype configur=
ation
file for your modem=BB and proposed the following configuration parameter=
s:

     ModemAnswerCmd:         ATA
     ModemCommaPauseTimeCmd: ATS8=3D2
     ModemDialCmd:           ATDT%s
     ModemEchoOffCmd:        ATE0
     ModemFlowControl:       rtscts
     ModemHardFlowCmd:       AT&K3
     ModemNoAutoAnswerCmd:   ATS0=3D0
     ModemNoFlowCmd:         AT&K
     ModemOnHookCmd:         ATH0
     ModemRate:              19200
     ModemRecvFillOrder:     LSB2MSB
     ModemResetCmds:         ""
     ModemResultCodesCmd:    ATQ0
     ModemSendFillOrder:     LSB2MSB
     ModemSetVolumeCmd:      "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
     ModemSetupDCDCmd:       AT&C1
     ModemSetupDTRCmd:       AT&D2
     ModemSoftFlowCmd:       AT&K4
     ModemSoftResetCmd:      ATZ
     ModemVerboseResultsCmd: ATV1
     ModemWaitTimeCmd:       ATS7=3D60
=20
Is this OK, or should I change any parameter?


Thanks,
Mark