Re: Problems determining the kind of modem

Hi,

according to the information you have provided, the modem should be=20
supported by the HSF driver that you can download at:

http://www.linuxant.com/drivers/hsf/downloads-license.php

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



[email protected] wrote:
>=20
> Hi, I installed Mandriva Linux on my Toshiba Satellite
> P105-S6024 laptop and I'm trying to fix my modem. I'm
> pretty sure it is made by Conexant, according to what
> I see in Windows device manager. I downloaded and run
> scanModem but it aborted abruptly:
>=20
> ./scanModem
>>From http://limodems.technion.ac.il , get a recent
> update of scanModem, if this copy was not there
> obtained. There are weekly updates.
> Updated on: 2007_June_19
> ls: /usr/bin/gcc*: No existe el fichero o el
> directorio
> Identifying PCI bus slots with candidate modems.
>  =3D=3D=3D Finished modem firmware and bootup diagnostics
> section.=20
>=20
> =3D=3D=3D
>  =3D=3D=3D Next deducing cogent software =3D=3D=3D
> Analysing card in PCI bus 00:1b.0, writing to
> scanout.00:1b.0
>    =20
>=20
>     Modem with PCI ID 8086:27d8 is in the software
> modem category.
>  The modem driver snd-intel8x0m is Not loaded.
>  To enable functional diagnostics, please either
> briefly login as Root: su - root (Not for Ubuntu) and
> unload and reload the modem driver
>           modprobe -r snd-intel8x0m
>           modprobe snd-intel8x0m
>  Exit Root status
>          exit and rerun ./scanModem
>=20
> I followed the directions but now the program froze at
> "ls: /usr/bin/gcc*:".
>=20
> This is the ModemData file:
>=20
> --------------------------  System information -------
>=20
> ---------------------
> CPU=3Di686,  Mandriva Linux release 2007.1 (Official)
> for i586 Kernel 2.6.17-13mdvlegacy on a Dual-processor
> i686 / Linux version 2.6.17-13mdvlegacy
> ([email protected]) (gcc version 4.1.2 20070302
> (prerelease) (4.1.2-1mdv2007.1)) #1=20
>=20
> SMP Fri Mar 23 19:05:24 UTC 2007
>  scanModem update of:  2007_June_19
> ALSAversion 1.0.14rc2
> USB modem not detected by lsusb
> Modem or host audio card candidates have firmware
> information:
> PCI slot	PCI ID		SubsystemID	Name
>  ----------	---------	---------	--
>=20
> ------------
>  00:1b.0	8086:27d8	1179:ff31	Audio device: Intel
> Corporation 82801G=20
>  Modem interrupt assignment and sharing:=20
>  21:        170          0   IO-APIC-level  HDA Intel
>  --- Bootup diagnositcs for card in PCI slot 00:1b.0
> ----
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
> low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1b.0 to
> 64
> ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> PM: Writing back config space on device 0000:00:1b.0
> at offset 1 (was 100006, writing 100002)
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level,
> low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1b.0 to
> 64
>  The PCI slot 00:1b.0 of the modem card may be
> disabled early in a bootup process,  but then enabled
> later. If modem drivers load but the  modem is not
> responsive, read Bootup.txt about possible fixes. Send
> dmesg.txt along with ModemData.txt to
> [email protected] if help is needed.
>  =3D=3D=3D Finished modem firmware and bootup diagnostics
> section.=20
>=20
> =3D=3D=3D
>  =3D=3D=3D Next deducing cogent software =3D=3D=3D
> 8086:27d8 is a High Definition Audio card, possibly
> hosting a soft modem.
>=20
>=20
> Now comes the file "scanout.00:1b.0":
>=20
> PCIDEV=3D8086:27d8
> CLASS=3D"Class 0403: 8086:27d8"
> NAME=3D"Audio device: Intel Corporation 82801G "
> Vendor=3D8086
> Device=3D27d8
> SUBSYS=3D1179:ff31
> SUBNAME=3D" Toshiba America Info Systems AC97 Data Fax
> SoftModem with SmartCP"
> SUBven=3D1179
> IRQ=3D21
> Test=3D"./scanModem test 8086:27d8 179:ff31"
> SOFT=3D8086:27d8
> SLMODEMD_DEVICE=3Dmodem:1
> PORT=3D"modem:1"
> Driver=3Dsnd-intel8x0m
> DRIVER_=3Dsnd_intel8x0m
> KDRIVER=3DSND_NTEL8X0M
> MPLACE=3D
>=20
> I tried the ListModem utility on Windows as well but
> it reported no modem found.
>=20
> I'm quite sure my Modem maker is Conexant because
> that's what Windows Device Manager says: "CXT". Most
> driver files are also signed by Conexant.
> So I know I have to download and compile some Linuxant
> driver.=20
>=20
> The problem is that before downloading the driver I
> have to know whether my modem is HCF, HSF or whatever,
> but neither scanModem nor ListModem helped me in that
> respect.
> Could somebody interpret all these data and vendor
> codes to tell me what kind of modem I have?
>=20
> For more information:
>=20
> This is what Windows Device Manager says about my
> modem:
>=20
> HDAUDIO Soft Data Fax Modem with SmartCP
> Location: 65535 (Internal High Definition Audio Bus)
> Device Instance Id:
> HDAUDIO/FUNC_02&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000/4&484DAEA&0&=
0002
>=20
> By the way, the sound card is Conexant as well:
>=20
> Conexant High Definition Audio Properties
> Location: 65535 (Internal High Definition Audio Bus)
> Device Instance Id:
> HDAUDIO/FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31&REV_1000/4&484DAEA&0&=
0001
>=20
>=20
>>From the "Query Modem" on the Control Panel I tried
> what I think are the so called "ATI commands", and
> copied the output from the log file:
>=20
> ATQ0V1E0 - OK
> AT+GMM - +GMM: HDAUDIO Soft Data Fax Modem with=20
>=20
> SmartCP
> AT+FCLASS=3D? - 0,1
> AT#CLS=3D? - COMMAND NOT SUPPORTED
> AT+GCI? - +GCI: A0
> AT+GCI=3D? - +GCI:=20
>=20
> (00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,13,14,15,16,19,1=
A,1B,1C,1D,1E,1F,20,21,22,23,24,25,26,27,28,
> 29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,40,41=
,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,
> 51,52,53,54,55,56,57,58,59,5A,5B,5C,5E,5F,60,61,62,63,64,5,66,67,68,69,=
6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,7
> 8,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,B,8C,8D,8E,8F,9=
0,92,93,94,96,97,98,99,9A,9B,9C,9D,9E,9F,A
> 0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,=
B8,B9,BA,BB,BC,BD,BE,BF,C1,C2,C3,C4,C5,
> C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE=
,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F7,F8,F9,=
FA,FB,FC,FE)
> ATI1 - 255
> ATI2 - OK
> ATI3 - SoftK56V_B2.1_V7.35.00
> ATI4 - HDAUDIO Soft Data Fax Modem with SmartCP
> ATI5 - 160
> ATI6 - SoftK56=20
>        CModem Version 12
>        Rksample Version 342
> ATI7 - 255
>=20
>=20
> On Mandriva, the Mandriva Control Center reports the
> following:
>=20
> Identificaci=F3n
> Fabricante: ‎Intel Corporation
> Descripci=F3n: ‎82801G (ICH7 Family) High
> Definition Audio=20
>=20
> Controller
> Clase de soporte: ‎Audio device
> Controlador
> M=F3dulo: ‎snd-hda-intel
> Conexi=F3n
> Bus: ‎PCI
> Bus PCI #: ‎0
> Dispositivo PCI #: ‎27
> Funci=F3n PCI #: ‎0
> ID del fabricante: ‎0x8086
> ID del dispositivo: ‎0x27d8
> Sub-ID del fabricante: ‎0x1179
> Sub-ID del dispositivo: ‎0xff31
>=20
>=20
> And finally, the output of a "lspci -v" as root:
>=20
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7
> Family) High Definition Audio Controller (rev 02)
>         Subsystem: Toshiba America Info Systems AC97
> Data Fax SoftModem with SmartCP
>         Flags: bus master, fast devsel, latency 0, IRQ
> 21
>         Memory at d0340000 (64-bit, non-prefetchable)
> [size=3D16K]
>         Capabilities: [50] Power Management version 2
>         Capabilities: [60] Message Signalled
> Interrupts: Mask- 64bit+ Queue=3D0/0 Enable-
>         Capabilities: [70] Express Unknown type IRQ 0
>=20
> Can anybody make sense from this? Which driver should
> I download?
>=20
>=20
>       =20
> _______________________________________________________________________=
_____________
> =A1Descubre una nueva forma de obtener respuestas a tus preguntas!
> Entra en Yahoo! Respuestas.
> http://es.answers.yahoo.com/info/welcome
> _______________________________________________
> hcflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hcflinux