Re: Re : Two internal modem in one box ?
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Organization | Linuxant Inc. |
| Message-ID | <[email protected]> |
Hi, normally up to 8 devices are created by the 'hsfconfig' script, even if you do not have up to 8 modems installed. Please try to run the 'hsfconfig --serial' command in a root shell to see if it fix the problem. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Cedric Fontaine wrote: > Bonjour, > > Le jeudi 25 novembre 2004 à 12:18:49, vous écriviez : > > LsJ> Hi, > > LsJ> the first modem will be available as '/dev/modem' and '/dev/ttySHSF0' > LsJ> and the second modem will be available as '/dev/ttySHSF1'. The driver > LsJ> will automatically handle both modems. > > ls -al /dev/ttySH* > crw-rw-rw- 1 root root 240, 64 nov 25 18:21 /dev/ttySHSF0 > > Bus 4, device 12, function 0: > Communication controller: Conexant HSF 56k HSFi Modem (#2) (rev 1). > IRQ 5. > Master Capable. Latency=64. > Non-prefetchable 32 bit memory at 0xfc5f0000 [0xfc5fffff]. > I/O at 0xb800 [0xb807]. > Bus 4, device 8, function 0: > Communication controller: Conexant HSF 56k HSFi Modem (rev 1). > IRQ 5. > Master Capable. Latency=64. > Non-prefetchable 32 bit memory at 0xfc5e0000 [0xfc5effff]. > I/O at 0xbc00 [0xbc07]. > > I can't see the two modems... >