Re: HSF with USR 5660A, connection extremely slow and unreliable
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Organization | Linuxant Inc. |
| Message-ID | <[email protected]> |
Hi, the V32B modulation does support 14.4kbps connections but as you reported, it seems that you are connect at 7200bps in the logs you have sent us. You could try to dial to another modem to see if you have the same problem. You could also try one of the following init. strings : --- AT &F W1 +ER=1; +DR=1; +MS=V32B,0,14400,14400,14400,14400 AT &F W1 +ER=1; +DR=1; +MS=V32B,1,14400,14400,14400,14400 --- Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Timothee Besset wrote: > Hello, > > I am trying the FREE version of the HSF driver to see if I can use it to get my dial-up working under Linux. Modem is a USR 5660A, which I have configured and working great under windows. > > I am aware that the drivers will be limited to 14Kbits until I get a License, however atm all I can get appears to be 7200 from the logs, and like 2400 from the usage feeling. > > I have tried talking to the modem to get configuration information ( see hsfconnect.log ) and configure things a bit better, but all I can see is V32B at 7200 bauds? > > TTimo > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > hsflinux mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/hsflinux