Re: HSF with USR 5660A, connection extremely slow and unreliable

No .. with either of those two init lines, the modem can't seem to negociate with the server. After dialing it just keeps being noisy and never connects me. I tried other variations, but all it gives me is a failure to connect with a NO_CARRIER response

TTimo

On Mon, 06 Dec 2004 13:23:06 +0000
"Linuxant support (Jonathan)" <[email protected]> wrote:

> Hi,
> 
> the V32B modulation does support 14.4kbps connections but as you 
> reported, it seems that you are connect at 7200bps in the logs you have 
> sent us.
> 
> You could try to dial to another modem to see if you have the same 
> problem. You could also try one of the following init. strings :
> 
> ---
> AT &F W1 +ER=1; +DR=1; +MS=V32B,0,14400,14400,14400,14400
> AT &F W1 +ER=1; +DR=1; +MS=V32B,1,14400,14400,14400,14400
> ---
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> [email protected]
> 
> 
> Timothee Besset wrote:
> > Hello,
> > 
> > I am trying the FREE version of the HSF driver to see if I can use it to get my dial-up working under Linux. Modem is a USR 5660A, which I have configured and working great under windows.
> > 
> > I am aware that the drivers will be limited to 14Kbits until I get a License, however atm all I can get appears to be 7200 from the logs, and like 2400 from the usage feeling.
> > 
> > I have tried talking to the modem to get configuration information ( see hsfconnect.log ) and configure things a bit better, but all I can see is V32B at 7200 bauds?
> > 
> > TTimo
> > 
> > 
> > 
> > 
> > ------------------------------------------------------------------------
> > 
> > _______________________________________________
> > hsflinux mailing list
> > [email protected]
> > https://www.linuxant.com/mailman/listinfo/hsflinux
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux