Re: Cannot get hsf driver to work, close, but no go!

Hi,

it seems that the HSF driver detected the device but fails with the 
following error message:

---
cnxthsf_cnxt_serial_add: ComCtrlOpen failed (1)
hsfpcibasic2: probe of 0000:00:0a.0 failed with error -5
---

Could you send at [email protected] the output of 'dumpdiag' please? 
Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]


Dave wrote:
> Gentoo 2-6.10-r6 kernel AMD64
> 
> The driver compiles fine, but wont load correctly  and hsfconfig keeps 
> telling me its not detected.  the auto-installer detects it as an HSF 
> conexant modem PCI ID:  14F1:2013  ,.  Here is my dmesg, etc
> 
> ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 209
> cnxthsf_cnxt_serial_add: ComCtrlOpen failed (1)
> hsfpcibasic2: probe of 0000:00:0a.0 failed with error -5
> usbcore: registered new driver hsfusbcd2
> 
> lsmod:
> Module                  Size  Used by
> hsfusbcd2              73328  0
> hsfmc97sis             63976  0
> hsfmc97ati             61848  0
> hsfmc97ali             68960  0
> hsfmc97via             65008  0
> hsfmc97ich             67496  0
> hsfpcibasic2           71720  0
> hsfserial              21924  7 
> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2 
> 
> hsfengine            1626624  1 hsfserial
> hsfosspec              93712  9 
> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial,hsfengine 
> 
> hsfsoar                64808  7 
> hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2 
> 
> nvidia               4049244  12
> 
> hsfconfig:
> 
> No pre-built modules for: unknown-unknown linux-2.6.10-gentoo-r6 x86_64
> 
> Trying to automatically build the driver modules...
> (this requires a C compiler and proper kernel sources to be installed)
> 
> Where is the linux source build directory that matches your running kernel?
> [/lib/modules/2.6.10-gentoo-r6/build]
> 
> Building modules for kernel 2.6.10-gentoo-r6, using source directory
> /lib/modules/2.6.10-gentoo-r6/build. Please wait...
> done.
> error: 'kernel.modprobe' is an unknown key
> 
> ERROR: no device detected by hsf driver
> 
> 
> 
> 
> 
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux