Re: Newbie with errors on hsf install...

Hi,

the problem is not this warning message:

---
warning: hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686.rpm: V3
DSA signature: NOKEY, key ID 5dfbf7dc
---

that you can safely ignore. Since you have a MC97 modem connected to the 
AC97 bus, this modem can be from various manufacturers and only Conexant 
is supported by our HSF modem driver.

Please run the 'hsfconfig -i' command in a root shell and then run the 
'dmesg' command. If your modem is not based on a Conexant chipset, you 
will obtain an error message stating so at the end of the 'dmesg' output.

If this is not the source of the problem, please send at 
[email protected] the output of 'dumpdiag'. Type the following in a
root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]


Julie Sadler wrote:
> hi...history of what is done: on a fresh install fedora core 3 on a dell
> inspiron 8200. (luckily eth0 is up!)
> 
> did scan modem and found:
>  The soft modem Subsystem operates under a controller
>    8086:2486 82801CA/CAM AC97 ICH3
> Also in the data file was this message I thought might be important...
> 
>  The kernel-2.6.9-1.667 was compiled with CONFIG_REGPARM, providing more
> compact and faster code.
> 
>  The kernel was assembled with compiler:  3.4.2
>  a gcc package must be installed to support driver compiling
> 
> Checking for kernel-headers needed for compiling.
>  kernel-headers have base folder /lib/modules/2.6.9-1.667/build
> 
>  Modem symbolic link is:  /dev/modem -> /dev/ttyS1
> 
> 
> Did the kernel .stk16 update....And then did the install. While
> installing i got this error message on the web:
> 
> warning: hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686.rpm: V3
> DSA signature: NOKEY, key ID 5dfbf7dc
> Conexant HSF softmodem driver, version 7.18.00.03full
> 
> If you need license keys, assistance or more information, please go to:
>     http://www.linuxant.com/
> 
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
> 
> Pre-built driver modules that seem compatible with your system were
> found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.9-1.667.stk16.
> WARNING: renamed existing /dev/modem to /dev/modem.old:
> 
> lrwxrwxrwx  1 root root 10 Mar 10 15:54 /dev/modem.old -> /dev/ttyS1
> 
> ERROR: no device detected by hsf driver
> error: %post(hsfmodem-7.18.00.03full_k2.6.9_1.667.stk16-1fdr.i686)
> scriptlet failed, exit status 1
> 
> 
> I downloaded the public key...but when i go to install it in terminal i
> get this...
> --import/pubkey unknown option
> 
> i am stuck! Can anyone point me in the right direction?
> thanx!
> J>
> 
> 
> 
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux