Re: Re: problem with hsfconfig !

Hi,

the C compiled required to compile kernel modules is 'gcc'. You should 
install the 'gcc' package, which is provided with Red Hat Linux 9, if 
you want to use a generic package of the HSF driver.

The device created by the HSF driver will be named '/dev/ttySHSF0'. A 
symbolic link '/dev/modem' should also be created or updated and it will 
points to '/dev/ttySHSF0'.

If you require more assistance, please send at [email protected] the 
output of 'dumpdiag'. Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]


Inder Pal wrote:
> hi
> 
> as said after installing Rpm package, hsfconfig was also successful.
> 
> but still modem is not working,
> i am not able to find /dev/ttyHSF0 or /dev/cuaHSF0 in kpp
> 
> how to get it.
> Inder
> 
> 
> On Fri, 25 Mar 2005 23:00:47 +0530, Inder Pal <[email protected]> wrote:
> 
>>hi
>>one of my friend has sugessted to install C compiler,
>>as it is not installed.
>>is this the problem?
>>Inder
>>
>>
>>On Thu, 24 Mar 2005 10:33:09 -0500, Linuxant support (Jonathan)
>><[email protected]> wrote:
>>
>>>Hi,
>>>
>>>the default path guessed by the 'hsfconfig' script should work fine if
>>>you have installed the 'kernel-source' package for the kernel you are
>>>currently running. Since you are running Red Hat 9, it is possible that
>>>we offer a pre-compiled RPM package for your kernel version at:
>>>
>>>http://www.linuxant.com/drivers/hsf/downloads-license.php
>>>
>>>that will be easier to install than the generic package that you are
>>>currently trying to install.
>>>
>>>Regards,
>>>
>>>Jonathan
>>>Technical specialist / Linuxant
>>>www.linuxant.com
>>>[email protected]
>>>
>>>
>>>Inder Pal wrote:
>>>
>>>>hi
>>>>i am using redhat9
>>>>i have installed dlink internal pci modem DFM-560IS+++
>>>>V.92/56K Internal Modem Card..(Conxeant-Rockwell based)
>>>>Kudzu detected it on boot up and installed drivers.
>>>>I have also installed necessary rpm recevd with it in CD.
>>>>after that i have to run hsfconfig, which is givin problem.
>>>>
>>>>when i run hsfconfig, it asks for path C header files for compiling.
>>>>what path should i give.??
>>>>
>>>>pls send in detail.
>>>>
>>>>the rpm package is same as available at
>>>>http://www.linuxant.com/drivers/hsf/install.php
>>>>
>>>>
>>>>
>>>>Thanks n Rgds
>>>>Inder
>>>>
>>>>[email protected]
>>>>
>>>
>>
>>-- 
>>Inder Pal Singh Khurana
>>Cell No. +91 9223475347
>>
>>Aim for the moon because even if you miss,
>>you'll still land among the stars!
>>
> 
>