Re: FULL Version & SuSE 9.3 problem

Hi,

since it is working fine without a license, the problem could be related 
to the modulation used. As a workaround, you could try with different 
modulations to see if there is a difference. To do so, please try with 
each of the following init. strings and hopefully one of them will solve 
the problem:

---
AT &F W1 +ER=1; +DR=1; +MS=V90,0
AT &F W1 +ER=1; +DR=1; +MS=V90,1
AT &F W1 +ER=1; +DR=1; +MS=V34,0
AT &F W1 +ER=1; +DR=1; +MS=V34,1
AT &F W1 +ER=1; +DR=1; +MS=V32B,0
AT &F W1 +ER=1; +DR=1; +MS=V32B,1
AT &F W1 +ER=1; +DR=1; +MS=V32,0
AT &F W1 +ER=1; +DR=1; +MS=V32,1
---

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Fau Marz wrote:
> I am a registered user for both LinuxANT HSF Modem drivers and driverloader 
> driver.
> 
> I'm getting a problem with HSF Modem driver and SuSE Linux 9.3.
> 
> In the past I've used SuSE 9.2 with the modem driver and I had no problems.
> 
> Now I've installed SuSE 9.3 on the same PC (installed from scratch in dual 
> boot with the old SUSE 9.2) and after re-installing the modem driver (using 
> cnxtinstall.run) I find that trying to connect with kinternet or cinternet 
> make the system hard-crash: it hangs all the computer and you can do nothing 
> else than turn the power off.
> 
> If I try the drivers in the "free" configuration (max 14400baud, no fax) the 
> connection works properly; after registering the drivers with my license key 
> to the full version, the modems hangs up the entire system when trying to 
> connect. The modem is configured with YAST, and I've tried first at 57600baud, 
> then I reduced the speed at 14400 (as in the free license) but the result is 
> the same: after registering the license key the modem makes the system crash.
> I've tried also to change country (ITALY or USA) without any result.
> I've tried both the precompiled package and the generic package, with the same 
> results.
> 
> My computer is a Fujitsu-Siemens AMILO V7010, with Conexant AC'97 Modem
> 
> This is the output for hsfconfig --info:
> --------------------------------------------------------
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> Note: kernel module slamr overridden by hsfmc97ich hsfmc97sis hsfmc97via 
> hsfmc97ali
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
> 
> Current parameters: ("hsfconfig --info")
> 
> Config for modem unit 0: /dev/ttySHSF0
>         Device instance: 0-PCI-1002:434d-1734:1062
>         HW revision    : CXT30
>         HW profile name: hsfmc97ati
>         Registration ID: D556-C251-8EC8
>         License owner  : [email protected]
>         License key    : 16-4E-31-5A-45-5D
>         License status : OK
>         Current region : ITALY (T.35 code: 0059)
> ----------------------------------------------------------
> 
> If you need more info, please ask me.
> 
> May someone help me having my full version drivers working?
> 
> 
> Thank you,
> 
> Fausto Marzoli
>