Re: Problem with HSF drivers on FC4

Hi,

if you have rebooted and it didn't fix the problem, then it is quite 
possible that your modem is not based on a Conexant HSF chipset. If this 
is the source of the problem, a message stating so will appear in the 
output of the 'dmesg' command in a root shell.

If you require more assistance, please send at [email protected] the 
output of 'dumpdiag'. Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



André Fettouhi wrote:
> I have a DELL Inspiron 8200 with HSF modem and I have just upgraded to 
> the latest kernel from Fedora. I have tried to install the latest HSF 
> from linuxant for this kernel, but I get an scriplet failure
> 
> [root@andre-notebook gd1331]# rpm -ihv 
> hsfmodem-7.18.00.06full_k2.6.13_1.1526_FC4-1fdr.i686.rpm
> warning: hsfmodem-7.18.00.06full_k2.6.13_1.1526_FC4-1fdr.i686.rpm: 
> Header V3 DSA signature: NOKEY, key ID 5dfbf7dc
> Preparing...                ########################################### 
> [100%]
>   1:hsfmodem               ########################################### 
> [100%]
> Conexant HSF softmodem driver, version 7.18.00.06full
> 
> If you need license keys, assistance or more information, please go to:
>        http://www.linuxant.com/
> 
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
> 
> Pre-built driver modules that seem compatible with your system were 
> found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.13-1.1526-FC4.
> 
> ERROR: no device detected by hsf driver
> 
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> WARNING: module snd-intel8x0m still loaded; try "rmmod snd-intel8x0m" or 
> reboot
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
> error: %post(hsfmodem-7.18.00.06full_k2.6.13_1.1526_FC4-1fdr.i686) 
> scriptlet failed, exit status 1
> [root@andre-notebook gd1331]#
> 
> plus I get warnings during boot-up when testing for hardware that hsf..d 
> can not be loaded etc. Any suggestions how to fix this?
> 
> Kind Regards
> 
> André Fettouhi
>