Re: Modem works, but doesn't connect ( NO CARRIER)
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Message-ID | <[email protected]> |
Hi, it sounds like an handshaking problem. Please try with each of the following init. string, hopefully one of them will solve the problem. --- AT &F W1 +ER=1; +DR=1; +MS=V90,0 AT &F W1 +ER=1; +DR=1; +MS=V90,1 AT &F W1 +ER=1; +DR=1; +MS=V34,0 AT &F W1 +ER=1; +DR=1; +MS=V34,1 AT &F W1 +ER=1; +DR=1; +MS=V32B,0 AT &F W1 +ER=1; +DR=1; +MS=V32B,1 AT &F W1 +ER=1; +DR=1; +MS=V32,0 AT &F W1 +ER=1; +DR=1; +MS=V32,1 --- Please note that these init. strings will only work if you have a valid license installed and some of them might not work even if you have a valid license installed. Finally, for the problem setting the country, you are using an unsupported way to install the driver (using a package from the Mandriva Club repository) and it is quite possible that if you use an official package of the HSF modem driver available at: http://www.linuxant.com/drivers/hsf/full/downloads.php you will not have this problem. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Ignacio Fernández Galván wrote: > Hi, > > I have an IBM Thinkpad R51 with Mandriva LE2005. I installed the > hsfmodem rpm package from the club repository, the system seems to be > using the hsfmc97ich driver. > > As far as I know, the modem is working fine, if I set kppp to dial my > cell phone, it does so an my phone rings. But when I set it to dial my > ISP number, I only hear a constant "screech" (after the dialing tones, > of course) and, after a time out, I get a "NO CARRIER" response. The > same settings (phone number, username...) work fine in windows. > > I tried setting the region with "hsconfig --country", but it gave me an > empty region list. After creating /etc/.../hsfmc97ich/Region (which was > missing) as a symlink to /etc/.../hsfpci.../Region (sorry, I don't > remember the exact name, but it was the name of a module shown by > lsmod) I could set the region, but I don't know if it's really supposed > to work in this way. It didn't help, anyway. > > So, now everything seems to be working, except the last step: the modem > is not replying to the ISP. What am I missing? > > Thanks > > > > ___________________________________________________________ > How much free photo storage do you get? Store your holiday > snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com > _______________________________________________ > hsflinux mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/hsflinux