Re: Re: SuSE 10 x86_64 and Modem US Robotics

Hi,

we can see the following message in the output of the 'modprobe' command 
in the dump you have posted:

---
WARNING: Error inserting hsfsoar 
(/lib/modules/2.6.13-15-default/extra/hsfsoar.ko): Invalid module format
---

You have attempted to install a pre-compiled package but pre-compiled 
packages are only available for x86 and not x86_64 yet. On x86_64, only 
generic packages can be used for the moment.

For the build problem of the HSF modem driver version 7.18.00.07 on SuSE 
10.0, please send the '/tmp/hsfconfig-buildlog.txt' file to 
[email protected] and we will take a look at this issue.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Marcos Jordão wrote:
> Hello Jonathan, thanks by help.
>  
> Yes, I get and try the hsfmodem-7.18.00.07 version, but on "rpm -i" 
> command I get the error:
>  
> 
> linux:/home/marcos/modem/suse # rpm -i 
> hsfmodem-7.18.00.07full_k2.6.13_15_default-1suse.i586.rpm
> aviso: hsfmodem-7.18.00.07full_k2.6.13_15_default-1suse.i586.rpm: V3 DSA 
> signature: NOKEY, key ID 5dfbf7dc
> Removing old /etc/hsfmodem
> Removing old /usr/lib/hsfmodem
> Conexant HSF softmodem driver, version 7.18.00.07full
>  
> If you need license keys, assistance or more information, please go to:
>         http://www.linuxant.com/
>  
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
>  
> Pre-built driver modules that seem compatible with your system were 
> found under
> /usr/lib/hsfmodem/modules/binaries/linux-2.6.13-15-default.
>  
> ERROR: hsf driver not active
>  
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
> erro: %post(hsfmodem-7.18.00.07full_k2.6.13_15_default-1suse) scriptlet 
> failed, exit status 1
> linux:/home/marcos/modem/suse #
>  
> 
> ------------------------------------------------------------------
>  
> The file hsfdiag.txt generated by "hsfconfig --dumpdiag" is atacched.
>  
> I get and try the source version tar.gz.
> When I do "make install" it's seem fine, but on hsfconfig I get the error:
>  
> 
> linux:/home/marcos/modem/hsfmodem-7.18.00.07x86_64full # hsfconfig
> Conexant HSF softmodem driver, version 7.18.00.07x86_64full
>  
> If you need license keys, assistance or more information, please go to:
>         http://www.linuxant.com/
>  
> When reporting a problem for the first time, please send us the file 
> generated by "hsfconfig --dumpdiag".
>  
> No pre-built modules for: SuSE-10.0 linux-2.6.13-15-default x86_64
>  
> Trying to automatically build the driver modules...
> (this requires a C compiler and proper kernel sources to be installed)
>  
> Where is the linux source build directory that matches your running kernel?
> [/lib/modules/2.6.13-15-default/build]
>  
> Building modules for kernel 2.6.13-15-default, using source directory
> /lib/modules/2.6.13-15-default/build. Please wait...
>  
> ERROR: Module build failed!
> Please examine the log file "/tmp/hsfconfig-buildlog.txt" to determine why.
> linux:/home/marcos/modem/hsfmodem-7.18.00.07x86_64full #
>  
> ----------------------------------------------------------------
>  
> Oh my God, one day I will connect with Linux?
>  
> Thanks
>  
> Marcos Antonio Campos Jordão''
> 
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux