Re: rpm building problem on Modified FC5 kernel
"Parag N(पराग़)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Message-ID | <[email protected]> |
Hi,
thanks for link but still interested in why rpmbuild failed.
It seems you are using different SPEC file/ using some custom macros
that are not going to work under FC5 right?? If that is the case then
i suggest you to include that also in tarball package.
Regards,
Parag.
On 5/26/06, Linuxant support (Jonathan) <[email protected]> wrote:
> Hi,
>
> instead of rebuilding a RPM package with the TAR package, we recommend
> that you use the generic package of the driver in the RPM format. This
> package is able to support custom kernels. That package can be
> downloaded at:
>
> http://www.linuxant.com/drivers/hsf/full/downloads.php
>
> Regards,
>
>
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> [email protected]
>
>
>
> Parag N(पराग़) wrote:
> > Hi,
> > I modified FC5 kernel and now want to have working hsfmodem
> > driver for that. So i downloaded source and then used
> > rpmbuild -ta hsfmodem-7.47.00.01full.tar.gz 1>out 2>err
> > and got some errors that i am attaching here.
> > What changes i need then to build rpm for modified FC5 kernel?
> > Regards,
> > Parag.
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > hsflinux mailing list
> > [email protected]
> > https://www.linuxant.com/mailman/listinfo/hsflinux
>
_______________________________________________
hsflinux mailing list
[email protected]
https://www.linuxant.com/mailman/listinfo/hsflinux