Re: rpm building problem on Modified FC5 kernel

Hi,
    I have attached the output of 'rpmbuild -ta
hsfmodem-7.47.00.01full.tar.gz'. I want to know why am i getting
error: Installed (but unpackaged) file(s) found:
message.
Regards,
Parag.

On 5/30/06, Linuxant support (Jonathan) <[email protected]> wrote:
> Hi,
>
> using 'rpmbuild -ta' to build a pre-compiled package of DriverLoader is
> rarely used as users which have custom compiled kernels generally use
> the generic package in the RPM format instead. Since it is not often
> used, it is possible that you have hit an unknown issue with that feature.
>
> Can you please send at [email protected] the complete output of the
> 'rpmbuild -ta hsfmodem-7.47.00.01full.tar.gz' command? We will take a
> look at this issue.
>
> Regards,
>
>
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> [email protected]
>
>
>
> Parag N(पराग़) wrote:
> > Hi,
> >         thanks for link but still interested in why rpmbuild failed.
> > It seems you are using different SPEC file/ using some custom macros
> > that are not going to work under FC5 right?? If that is the case then
> > i suggest you to include that also in tarball package.
> >
> > Regards,
> > Parag.
> > On 5/26/06, Linuxant support (Jonathan) <[email protected]> wrote:
> >> Hi,
> >>
> >> instead of rebuilding a RPM package with the TAR package, we recommend
> >> that you use the generic package of the driver in the RPM format. This
> >> package is able to support custom kernels. That package can be
> >> downloaded at:
> >>
> >> http://www.linuxant.com/drivers/hsf/full/downloads.php
> >>
> >> Regards,
> >>
> >>
> >> Jonathan
> >> Technical specialist / Linuxant
> >> www.linuxant.com
> >> [email protected]
> >>
> >>
> >>
> >> Parag N(पराग़) wrote:
> >> > Hi,
> >> >     I modified FC5 kernel and now want to have working hsfmodem
> >> > driver for that. So i downloaded source and then used
> >> >  rpmbuild -ta hsfmodem-7.47.00.01full.tar.gz 1>out 2>err
> >> > and got some errors that i am attaching here.
> >> >      What changes i need then to build rpm for modified FC5 kernel?
> >> > Regards,
> >> > Parag.
> >> >
> >> >
> >> >
> >> ------------------------------------------------------------------------
> >> >
> >> > _______________________________________________
> >> > hsflinux mailing list
> >> > [email protected]
> >> > https://www.linuxant.com/mailman/listinfo/hsflinux
> >>
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > hsflinux mailing list
> > [email protected]
> > https://www.linuxant.com/mailman/listinfo/hsflinux
>

_______________________________________________
hsflinux mailing list
[email protected]
https://www.linuxant.com/mailman/listinfo/hsflinux